Gianni Industries Z-600N User manual

Z-600N Bracket
Typical mounting on in-swing door
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Z-600N Ver. D Published on 2011.09.08
Unit:mm
Application for the Electromagnet:
GL-1200F series
Installation Steps of Z bracket for In-swing doors
2
Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.
1
6
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
Finish
Once the position is correct,
use the screws to permanently
mount the Z bracket on the door
frame. This should be the last step.
4
Insert the guide pins into the
armature plate.
5
Put one rubber washer between
armature plate and the Z bracket.
3
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
Power
190
63.5
8
63.5
5
63.5
63.5
190
40
203
216
62
Minimal:62mm
Z-Bracket
In-swing
Frame
Door
Armature
Plate
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw