Gianni Industries Z-GL600 Bracket User manual

Minimal:43mm
Z-Bracket
In-swing
Frame
Door
Z-GL600 Bracket
In-Swing doors
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-Z-GL600 Ver. E Published on 2011.09.08
Unit:mm
Application of the Electromagnet:GL600-F
21
6 Finish
4
5
3
Power
203
48
8
55.5
5
42
48
203
40
203
43
GIANNI INDUSTRIES, INC.
Armature
Plate
Installation of Z bracket on In-swing Doors
Install the electromagnet on
the door frame. Make sure
t h e d o o r m a y b e
opened/closed.
Assemble Z bracket. Make
sure it is still loose.
Insert the guide pins into the
armature plate.
Fasten the armature plate to
Z bracket. Insert the rubber
washer between them.
Close the door and turn on
the power.
Let the armature plate and
electromagnet bond together.
Press Z bracket to the door
leaf and fasten it.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw