FOLDING INSTRUCTIONS
STEP 1
Rotate the crank set so that the pedal on the drive side (right side) of the bicycle is even with the
chain stay (FIG.4). Then, fold both pedals by rst pulling in on the spring-loaded release inside the
pedal and then folding down (FIG 5).
STEP 2
Open the STEM FOLDING QUICK RELEASE lever (FIG. 6) and fold the handlebar/stem assembly
downward (FIG. 7 and 8).
SEAT POST QUICK RELEASE
Open the lever (FIG. 1) and raise or lower the seat post to the
correct height. The seat post has an etched or stamped mark on its shaft which designates the post’s
“Minimum Insertion” or “Maximum Extension.” This mark must not be visible above the quick release.
Close the lever securely, making sure the seatpost does not slip.
STEM HEIGHT QUICK RELEASE
Open the lever (FIG. 2) and raise or lower the stem to the correct
height. The stem has an etched or stamped mark on its shaft which designates the stem’s “Minimum
Insertion” or “Maximum Extension.” This mark must not be visible above the quick release. Close the
lever securely, making sure the stem does not slip.
HANDLEBAR ROTATION QUICK RELEASE
Open the lever (FIG. 3) and rotate the handlebar to a
comfortable position, making sure the brake levers are within easy reach. Close the
lever securely, making sure it does not slip.
GIANT EXPRESSWAY FOLDING GUIDE
Thanks for purchasing the Giant Expressway folding bicycle. This guide will help you properly fold
and unfold your Expressway. Please read it thoroughly along with the Giant Owner’s Manual.
FIG. 1
FIG. 4
FIG. 6
FIG. 5
FIG. 7 FIG. 8
FIG. 3FIG. 2
SEAT POST QUICK RELEASE
FRAME FOLDING QUICK RELEASE
STEM HEIGHT QUICK RELEASE
STEM FOLDING QUICK RELEASE
HANDLEBAR ROTATION
QUICK RELEASE
caution