Gifas FlashLED User manual

Manual FlashLED Li-Ion –Basic information
Page 1/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
Manual –FlashLED Li-Ion
Imprint:
GIFAS-ELECTRIC GmbH
CH-9424 Rheineck
Switzerland
www.gifas.ch
Technical changes and errors reserved.
This manual is property of GIFAS-ELECTRIC GmbH and may not be reproduced, copied,
translated, transmitted, duplicated or transferred to third parties in part or in whole without
previous written authorization by GIFAS-ELECTRIC GmbH.
version: V2.06/0814
English

Manual FlashLED Li-Ion –Basic information
Page 2/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
Contents
1. Basic information 3
1.1 Documentation 3
1.1.1 Product identification 3
1.1.2 Labelling concept for integrated text and references 3
1.2 Areas of application 3
1.3 Features and advantages 4
1.4 Standardprogramm 4
1.5 Scope of delivery 5
1.5.1 FlashLED work and inspection lamp with emergency light function 5
1.5.2 FlashLED charging station 85-264 VAC 5
1.5.3 FlashLED vehicle connection cable with cigarette lighter plug for 12-24 VDC charging station 5
1.6 Technical data 6
1.6.1 FlashLED specifications 6
1.6.2 Charging station specifications 6
1.6.3 Dimensions FlashLED Lamp and charging station 7
1.6.4 Radiation pattern 8
1.7 Responsibilities of the operator 9
1.8 Start-up 9
1.9 Storage/transport 9
1.10 Cleaning 10
1.11 Disposal of the device 10
2. Setting up the lamp 11
2.1 Notes on spare parts 11
3. Overview of functions 12
3.1 Explanations of the symbols 12
3.2 Indicator functions 12
3.3 Stylus functions: 12
3.4 Operating modes 13
3.4.1 Basic functions 13
3.4.2 Remaining light mode 13
3.4.3 Emergency light 13
3.4.4 Blinking function 13
3.4.5 Morse function 13
3.5 Monitoring functions 14
3.5.1 Lamp head temperature control 14
3.5.2 Battery temperature control 14
3.5.3 Deep discharge protection 14
3.6 Charging station 14
3.7 Emergency light function 15
3.7.1 Emergency light ON 15
3.7.2 Emergency light OFF 15
4. Maintenance and troubleshooting 16
4.1 Lithium-ion battery 16
4.2 Inspection plan 16
4.3 Description of maintenance work 16
4.4 Troubleshooting 16
5. Declaration of conformity 17

Manual FlashLED Li-Ion –Basic information
Page 3/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1. Basic information
1.1 Documentation
1.1.1 Product identification
The CE label attests that your device meets the safety requirements of EU directives
2006/95/EC and 2004/108/EC.
1.1.2 Labelling concept for integrated text and references
Dangerous situation that may result in injury or death, if not avoided
Dangerous situations that may result in minor to moderate injuries if not avoided.
Designates information that may cause property damage, for example, but not personal
injuries.
1.2 Areas of application
The FlashLED is a modern work and inspection lamp with an emergency light function, which can be used for a
variety of applications. For example:
industrial, trade fair and exhibition halls
hangars, depots, operations rooms
schools, sports facilities and parks
civil defence/military facilities, fire departments and municipal facilities
police, security and maintenance personnel
shopping centres, public buildings
road and rail vehicles
It is especially suitable for use as a work light, such as during repairs, for deployments at night, particularly for
situations in which the lamp needs to be dimmed, i.e. with varying intensity of the light output.
The powerful and energy-efficient FlashLED lights, with the latest LED technology, offer a wide range of
application possibilities as work and inspection lamps with an emergency light function.
The FlashLED lamp must not be used in environments where there is a risk of explosion.
Flammable gases or smoke constitute a serious safety risk.
The FlashLED charging station can be mounted on normal flammable materials.

Manual FlashLED Li-Ion –Basic information
Page 4/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.3 Features and advantages
Basic features and advantages of the FlashLED:
Latest lithium-ion technology for high energy density and maximum durability
(up to 1000 cycles possible, no memory effect)
GIFAS Battery Management System for monitoring and verifying all important battery operating parameters
(charge level, temperature, charging/discharging, etc.)
Delivered in energy-saving mode, allowing a very high storage time (>1 year)
Short charging time
Up to 9 hours of light in four selectable lighting modes
Memory function –the last setting is retained
Flash function
Low light mode
High protection type for lamp and charging station
Robust housing made of polyamide
Compact design
Corrosion-resistant charging contacts (nickel- and gold-plated)
Vertically swivelling lamp head
The FlashLED lamp head can become very hot during operation. Therefore, we recommend
that you always take appropriate care when touching the lamp housing.
The concentrated light can damage eyesight in certain circumstances.
Do not look at the LED from a short distance without special protection. Goggles with tinted
glasses are recommended as protection.
1.4 Standard program
We maintain a wide range of products covering all customer needs. You can find the most recent documents on
www.gifas.ch, or contact us by phone.
We would be happy to advise you!

Manual FlashLED Li-Ion –Basic information
Page 5/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.5 Scope of delivery
1.5.1 FlashLED work and inspection lamp with emergency light function
1.5.2 FlashLED charging station 85-264 VAC
1.5.3 FlashLED vehicle connection cable with cigarette lighter plug for 12-24 VDC charging station

Manual FlashLED Li-Ion –Basic information
Page 6/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.6 Technical data
1.6.1 FlashLED specifications
Operating voltage from charging station: 11 - 30VDC
Electric power supply: Li-Ion-Accu 7,2VDC, 4400mAh
Power consumption: 12W@24VDC
Charging time for full charge: 5h
Illuminant: 5 Power-LED à 3W
Luminous period: Original setting Max
SPOT (3 LED): 9h 3h
WIDE (2 LED): 7h 3,5h
Full beam (5 LED): 4h 2h
Emergency light (5 LED): 3h -
Lighting current: Original setting Max
SPOT: 200lm 650lm
WIDE: 200lm 350lm
Full beam: 400lm 1000lm
Emergency light: 500lm nicht verstellbar
Light colour: cool white 6100-7000K
IP rating: IP65
Protection class: III
Temperature range: Operating: -20°C to +45°C
Charging: 0°C to +45°C
Dimensions: Lamp: 260 x 125 x 92,5mm (H x B x T)
Lamp incl. charging station: 332 x 149 x 106mm
Weight: 1,12kg
1.6.2 Charging station specifications
Operating voltage 230V: 85 - 264VAC 50/60Hz, 120 - 370VDC
Low voltage 12-24VDC: 11 - 30VDC
IP rating: IP20
Protection class: 230V: II
Low voltage 12-24VDC: III
Dimensions: 276 x 149 x 95mm (H x B x T)
Weight: 0,43kg
Emergency light function: selectable using magnetic switch

Manual FlashLED Li-Ion –Basic information
Page 7/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.6.3 Dimensions FlashLED Lamp and charging station
Die Ausführung BABS besitzt zusätzlich einen Ferritkern am 230VAC-Stecker.

Manual FlashLED Li-Ion –Basic information
Page 8/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.6.4 Radiation pattern
Spotlight SPOT (3 x 10°) Broad beam WIDE (2 x 38°)
Full Beam (3 x 10° and 2 x 38°)

Manual FlashLED Li-Ion –Basic information
Page 9/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.7 Responsibilities of the operator
1. Ensure that this document is always stored together with the device.
2. Carefully read this manual before putting the device into operation for the first time.
3. This product has been designed and produced exclusively for the use specified in the documents. Any other
use that is not expressly stated could affect the integrity of the product and/or represent a source of danger.
4. The manufacturer assumes no liability for damage caused by improper use or usage not according to the
intended use of the product.
5. The product must not be used in environments where there is a risk of explosion. Flammable gases or
smoke constitute a serious safety risk.
6. In addition to Swiss regulations, the standards and regulations applicable in the country of use must be
observed.
7. Installation must be performed in accordance with the valid regulations.
8. The manufacturer accepts no liability in the event of improper installation or in the case of deformation that
may occur during use.
9. Before carrying out any work on the device, the power supply must be switched off.
10. During servicing, only original manufacturer’s parts may be used. Servicing work on the FlashLED light may
only be performed by qualified personnel.
11. Any procedure not expressly mentioned by the manufacturer in the instructions is not permitted.
12. Installation of the charging station must be performed in accordance with the valid regulations.
13. The packaging materials (plastic, polystyrene, etc.) should not be stored within reach of children.
Although the FlashLED lamp has been designed for harsh environments, it must be ensured
that it is used according to the IP65 protection standard to prevent damage and
malfunctions.
It should also be ensured that the loading station of the FlashLED lamp is operated in a
dry place according to its protection standard (IP20).
1.8 Start-up
The FlashLED is set to energy-saving mode upon delivery. The main operating electronics
are switched off, only the monitoring feature for the li-ion battery is activated.
To start-up please insert the lamp into the charging station and charge the battery
completely.
1.9 Storage/transport
The light can be stored for no more than one year with the factory charge (delivery state).
After more than one year, the battery must be re-charged.
Store batteries at room temperatures between 10° and 20° C.
Always protect the battery from temperatures below 0° C and above 45° C (e.g. continuous sun exposure),
fire, water and moisture.
The original packaging protects the lamp from damage.
To avoid short circuits, cover the charging contacts when the product is not in use.
Do not place highly flammable material in the vicinity of the lamp or the charger.
The lamp should only be transported using the handles provided.

Manual FlashLED Li-Ion –Basic information
Page 10/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
1.10 Cleaning
If it is dirty, clean the lamp with a cleaning cloth. Do not use abrasives or solvents!
1.11 Disposal of the device
Battery-powered lights, batteries, accessories and packaging should be disposed of in an environmentally friendly
manner.
Do not dispose of battery-powered lights and batteries in the household rubbish!
According to European Directive 2012/19/EU on waste electrical and electronic products,
battery lights that can no longer be used must be collected separately and sorted for
environmentally friendly recycling; the same applies to defective or used batteries, subject to
Directive 2006/66/EC.

Manual FlashLED Li-Ion –Set up
Page 11/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
2. Setting up the lamp
2.1 Notes on spare parts
The Li-ion battery and the motherboard can only be replaced together by GIFAS-
ELECTRIC. In such a case, send in the device for repair.
If the front protective glass is to be replaced, a new seal must always be used.
No spare parts are available for the charging station. The entire charging station must
therefore be replaced.

Manual FlashLED Li-Ion –Functions
Page 12/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
3. Overview of functions
3.1 Explanations of the symbols
3.2 Indicator functions
3.3 Stylus functions:
Icon
Function
Description
Spotlight SPOT
3 x 10°
Display for LED SPOT setting
Flashing: brightness default setting has been changed
Strobe flashing: Emergency light mode display at the charging station
Broad beam WIDE
2 x 38°
Display for LED WIDE setting
Flashing: Brightness default setting has been changed
Full beam
3 x 10° und 2 x 38°
Display for LED full light setting
Flashing: Brightness default setting has been changed
Battery charge indicator
Segments show the available battery capacity in 25% increments.
Red LED flashing: light is in remaining light mode.
Icon
Function
Description
Main On/Off switch
Switching light on and off: each time the light is switched on, the memory
function is activated (most recently selected setting).
By holding the button down, the flashing frequency is changed
(faster/slower).
Light mode
By pressing the button, the light switches to spot-wide-full light mode
with the corresponding symbol shown in the display.
Pressing button briefly: returns to default settings.
Brightness
By pressing the button, the dim function is activated, always from
minimum to maximum or the reverse.

Manual FlashLED Li-Ion –Functions
Page 13/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
3.4 Operating modes
3.4.1 Basic functions
Switching on/off: Press briefly to switch the light on (with the last used settings) or off.
Lamp mode: Press briefly to switch the lamp mode between SPOT, WIDE and full light; the
appropriate icon is shown on the display.
Brightness: Press and hold to adjust the factory settings for the lamp brightness. This is shown by
the flashing icon.
Reset to the factory setting by briefly pressing ; the icon on the display is illuminated
continuously.
3.4.2 Remaining light mode
The remaining charge before the safety switch-off is activated ensures that the light will continue shining at least
15 minutes at the lowest level. This timespan guarantees that the user is not left in the dark unexpectedly and
can recharge the light in time. Indicated by a flashing red LED.
3.4.3 Emergency light
Selecting the normal/emergency light operating mode with the magnet switch determines the function of the light
in the event of a power outage at the charging station.
Once the supply voltage is detected, the light checks the magnet’s position. If “emergency light ON” has been
activated, emergency lighting is provided after 5 seconds during a power failure. When power has been restored,
the lamp turns off and is charged if required.
If the lamp is removed normally from the charger, it does not switch on.
Operating mode
Charge status display
Light mode display
Emergency light
ON
Based on the charge status, the LED flashes while
the battery is charging
Top blue LED strobe-flashes
The green LED strobe-flashes when the battery is
fully charged
Top blue LED strobe-flashes
Emergency light
OFF
Based on the charge status, the LED flashes while
the battery is charging
No display
The green LED strobe-flashes when the battery is
fully charged
No display
3.4.4 Blinking function
Simultaneously pressing and activates the light's flashing feature. The lighting mode and brightness
(dimming) can be adjusted in the usual manner. The flash frequency default setting of 1Hz can be increased
or decreased by pressing the button down and holding. Briefly pressing the switches the light off.
3.4.5 Morse function
Light impulses (Morse code) can be created when the light is switched off . The light must be in spot mode.

Manual FlashLED Li-Ion –Functions
Page 14/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
3.5 Monitoring functions
The intelligent Gifas Battery Management System protects the Li-ion battery from high temperatures,
overcharging and deep discharges, thereby giving it an especially long service life.
3.5.1 Lamp head temperature control
As the head can become very hot when operating at maximum performance in areas with a high ambient
temperature, it is equipped with a temperature monitor.
If the maximum permissible lamp head temperature of 65° C is exceeded, the light intensity is reduced until the
light head cools down. Following this the brightness will be restored to the last set value.
3.5.2 Battery temperature control
The device switches the battery off before it overheats: The light does not function below -20° C and above +45°
C. The light cannot be charged below 0° C and above +45° C.
3.5.3 Deep discharge protection
The Li-ion battery comes with electronic deep discharge protection, which ensures the battery is never fully
discharged. This protects it from irreparable damage.
Recharge the discharged battery after use whenever possible.
If the battery has undergone deep discharge due to a very long storage time without recharging, the charging
indicator does not function briefly, even though the battery is charging in the station. The indicator appears after
a few minutes, however.
3.6 Charging station
The emergency light function can be activated by positioning the magnet.
Emergency light ON: Factory setting
If the supply voltage of the charger fails, the lamp switches to emergency lighting.
Emergency light OFF: If the supply voltage of the charger fails, the light remains switched off. Recommended
for charging from a car battery.
In the 12-24V version for use in vehicles, the light draws its power from the electrical
system, which causes the car battery to discharge more when the vehicle engine is
switched off.
Emergency light OFF position
Magnet
Emergency light ON position

Manual FlashLED Li-Ion –Functions
Page 15/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
3.7 Emergency light function
When it is in the charging station, the lamp can be switched on and used as a continuous light by pressing
the main switch. Press the main switch again to turn the lamp off.
When the charging station is active, neither the lighting mode nor dimming can be adjusted in continuous
light mode; the lamp can only be switched on or off.
If the switched-on lamp is placed in the active charging station, it switches off.
If the switched-on lamp is placed in the inactive charging station, the light stays on (the lamp functions the
way it does when disconnected from the charging station).
3.7.1 Emergency light ON
In the event of a power failure, the light switches to emergency lighting within 5 seconds until the power
supply returns (no matter whether it was set to OFF or continuous light beforehand).
3.7.2 Emergency light OFF
When in continuous lighting mode, the lamp turns off when the power fails. When the power supply returns,
the light stays off.

Manual FlashLED Li-Ion –Maintenance and troubleshooting
Page 16/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
4. Maintenance and troubleshooting
4.1 Lithium-ion battery
The following information and rules apply for Li-ion batteries to ensure proper and safe operation:
Self-discharge: At room temperature, self-discharge is generally 5% per month. It does not occur linearly
and depends on various parameters, such as temperature, charge level, battery status, etc.
The battery therefore needs to be recharged every 12 months.
Service life: If the battery is maintained well, up to 1000 charge cycles are possible. To achieve a long
service life, recharge the battery after each use. Do not use damaged batteries –send in
the light for repair.
Charging conditions: If at all possible, charge the battery at room temperature and only use GIFAS chargers. The
Li-ion battery does not have a memory effect: it can be charged at any time, regardless of
the charging level, without damaging the cells.
Storage: Protect the battery from temperatures above 45° C (e.g. continuous sun exposure), fire,
water and moisture. Always store batteries at room temperature and in a dry place.
Warranty: Batteries are parts that are subject to wear. If handled improperly, they can be damaged,
thus significantly impairing their service life. For this reason, the battery is not provided with
a warranty.
4.2 Inspection plan
4.3 Description of maintenance work
The battery-powered lamp is maintenance-free and does not contain any parts that need to be serviced.
4.4 Troubleshooting
Work to be carried out
Period/interval
Test the emergency light function
According to country-specific regulations / when needed
Fault/error message
Possible cause
Remedy
New lamp does not function
The lamp is delivered in power-
saving mode
To start the lamp, place it in the
active charging station for 5
seconds and charge the battery
completely
No LED flashing in the charging
status
Deep battery discharge due to long
disuse
Charge for at least four hours,
during which time the charging LED
should light up again
Lamp can no longer be charged
In an older charger (only 230V
input voltage), the miniature fuse is
defective
Contact the manufacturer (GIFAS),
send in the charging station and (if
needed) the lamp
Lamp can no longer be charged,
but charging station is OK
Charging electronics or battery
defective
Contact the manufacturer (GIFAS),
send in the lamp if needed
An LED diode no longer lights up
LED defective
Send the lamp to GIFAS
Emergency light ON/OFF setting
does not work properly
Faulty initialisation by magnetic
switch on the charging station
Send the lamp to GIFAS
The operating time of the luminaire
is only 10 minutes
Battery is no longer functional
Battery replacement by GIFAS

Manual FlashLED Li-Ion –Declaration of conformity
Page 17/17
GIFAS-ELECTRIC GmbH · Dietrichstrasse 2 · CH-9424 Rheineck · Phone [phone] · Fax [phone] · [e-mail]
5. Declaration of conformity