Giga-tronics 3000-32i/opt 1 User manual

Manual 07500340 Model 3000-32
Page 1
Operation Manual
Model 3000-32, 32C, 32S, 32i/opt 1, opt 5
4(1x8) & 8(1x4) & 8(1x2)
Coaxial Multiplexer
90400290

Manual 07500340 Model 3000-32
Page 2
Operation Manual
All technical data and specifications in this publication are subject to change without prior notice and do
not represent a commitment on the part of Giga-tronics, Incorporated.
© 2011 Giga-tronics Incorporated. All rights reserved. Printed in the U.S.A.
CONTACT INFORMATION
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
Telephone: [phone] (only within the United States)
925.328.4650
Fax: [phone]
On the Internet: www.gigatronics.com
Warranty
Giga-tronics Series 3000 Switching Modules are warranted against
defective materials and workmanship for three yearsfrom date of shipment,
or as detailed in the warranty section of this manual. Giga-tronics will, at its
option, repair or replace products that are proven defective during the
warranty period. This warranty DOES NOT cover damage resulting from
improper use, nor workmanship other than Giga-tronics service. There is no
implied warranty of fitness for a particular purpose, nor is Giga-tronics liable
for any consequential damages. Specification and price change privileges are
reserved by Giga-tronics.

Manual 07500340 Model 3000-32
Page 3
Operation Manual
Regulatory compliance information
This product complies with the essential requirements of the following applicable European
Directives, and carries the CE mark accordingly.
89/336/EEC and 73/23/EEC
EMC Directive and Low Voltage Directive
EN61010-1 (1993)
Electrical Safety
EN61326-1 (1997)
EMC –Emissions and Immunity
Manufacturer’s Name:
Manufacturer’s Address
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
U.S.A.
Type of Equipment:
Model Series Number
Switching Module
3000-32
Declaration of Conformity on file. Contact Giga-tronics at the following;
Giga-tronics, Incorporated
4650 Norris Canyon Road
San Ramon, California 94583
Telephone: [phone] (only within the United States)
925.328.4650
Fax: [phone]

Manual 07500340 Model 3000-32
Page 4
Operation Manual
Record of Changes to This Manual
Use the table below to maintain a permanent record of changes to this document. Corrected
replacement pages are issued as Technical Publication Change Instructions (TPCI). When you
are issued a TPCI, do the following:
1. Insert the TPCI at the front of the manual binder.
2. Remove the pages from the manual binder that are noted in the TPCI.
3. Replace the page(s) removed in the previous step with the corrected page(s).
4. Record the changes in the table below.
TPCI
Number
TPCI Issue
Date
Date Entered
Comments

Manual 07500340 Model 3000-32
Page 5
Operation Manual
Revision History
Revision
Description of Change
Chg Order #
Approved By
A
Initial Release
B
Updated
C
Reformatted 3/12
RCW

Manual 07500340 Model 3000-32
Page 6
Operation Manual
Contents
Contents........................................................................................................................................................6
Chapter 1 Introduction .................................................................................................................................7
1.1 Safety and Manual Conventions.........................................................................................................7
1.1.1 Product Reference.......................................................................................................................7
1.1.2 Personal Safety Alert...................................................................................................................7
1.1.3 Equipment Safety Alert ...............................................................................................................7
1.1.4 Notes ...........................................................................................................................................7
1.1.5 Electrical Safety Precautions ....................................................................................................... 7
Chapter 2 Configuration Table...................................................................................................................... 8
Chapter 3 Functional Description .................................................................................................................9
3.1 Introduction........................................................................................................................................9
3.2 General Description............................................................................................................................9
Chapter 4 Block Diagram ............................................................................................................................10
4.1 VXI Logical Address...........................................................................................................................15
4.2 LEDs...................................................................................................................................................15
4.2.1 “BUS” LED..................................................................................................................................15
4.2.2 “PWR” LED.................................................................................................................................15
Chapter 5 Internal Settings .........................................................................................................................16
5.1 Fuse ..................................................................................................................................................16
5.2 VXIbus Interrupt Level Selection.........................................................................................................16
Chapter 6 Specifications .............................................................................................................................17
Chapter 8 Register Map ..............................................................................................................................18
8.1 Model 3000-32S................................................................................................................................18
8.2 Model 3000-32C ...............................................................................................................................22
8.3 Model 3000-32 Option 1 ..................................................................................................................33
8.4 Model 3000-32 (Standard Model) ....................................................................................................36
8.5 3000-32 Option 5..............................................................................................................................39

Manual 07500340 Model 3000-32
Page 7
Operation Manual
Chapter 1 Introduction
1.1 Safety and Manual Conventions
This manual contains conventions regarding safety and equipment usage as described below.
1.1.1 Product Reference
Throughout this manual, the term “Common Core Switching Platform, Series 8800” refers to all models
of within the series, unless otherwise specified.
1.1.2 Personal Safety Alert
WARNING: Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
1.1.3 Equipment Safety Alert
CAUTION: Indicates a situation which can damage or adversely affect the product or
associated equipment.
1.1.4 Notes
Notes are denoted and used as follows:
NOTE: Highlights or amplifies an essential operating or maintenance procedure, practice, condition or
statement.
1.1.5 Electrical Safety Precautions
Any servicing instructions are for use by service-trained personnel only. To avoid personal injury, do not
perform any service unless you are qualified to do so.
For continued protections against fire hazard, replace the AC line fuse only with a fuse of the same
current rating and type. Do not use repaired fuses or short circuited fuse holders.
WARNING
!
CAUTION

Manual 07500340 Model 3000-32
Page 8
Operation Manual
Chapter 2 Configuration Table
DESCRIPTION
TOP ASSY
PCA
DATA SHEET
DESIGNATION
DESIGNATION
4(1x8), 8(1x4), 8(1x2)
90400290-001
85004060-001
(STANDARD )
3000-032
16(1x4), 8(1x2)
90400290-002
85004060-002
3000-032C
NEW / CASS L.M. FL
1(1x24),
1(1x32) w/ terminators
90400290-003
85004060-003
3000-032S
NEW / SANDERS
20(1x4)
90400290-004
85004060-004
OPTION 01
3000-032i
ICRC
4(1x8), 8(1x4), 8(1x2)
90400290-005
85004060-005
OPTION 05
3000-32 Opt 5
ALL PCA’S WOULD HAVE THEIR OWN SCHEMATIC SHOWING THE CONFIGURATION.

Manual 07500340 Model 3000-32
Page 9
Operation Manual
Chapter 3 Functional Description
3.1 Introduction
This manual provides the necessary information for the operation and maintenance of the Model 3000-
32 General Purpose VXI Switch Module.
3.2 General Description
Missing

Manual 07500340 Model 3000-32
Page 10
Operation Manual
Chapter 4 Block Diagram
4.1 3000-32 (Standard), 4(1x8), 8(1x4), 8(1x2)

Manual 07500340 Model 3000-32
Page 11
Operation Manual
4.2 3000-32C, 16(1x4), 8(1x2)

Manual 07500340 Model 3000-32
Page 12
Operation Manual
4.3 3000-32S 1(1x24), 1(1x32) w/terminators

Manual 07500340 Model 3000-32
Page 13
Operation Manual
4.4 3000-32i, Option 1, 20(1x4)

Manual 07500340 Model 3000-32
Page 14
Operation Manual
3000-32, Option 5, 4(1x8), 8(1x4)

Manual 07500340 Model 3000-32
Page 15
Operation Manual
Controls and Indicators
The following controls and indicators are provided to select and display the functions of the ASCOR
3000-8 Module’s operating environment.
4.5 VXI Logical Address
The Logical Address Switch is dual circular switches, D1 and D2 which are located at the rear of the
module. The address can be set to any value between 1 and 255 (decimal) or 1 and FF (hexadecimal),
(address 0 is reserved for the resource manager). However, the Module fully supports Dynamic
Configuration as defined in Section F of the VXI specification, address 255 (FF) should be selected only if
the Resource Manager also supports Dynamic Configuration.
4.6 LEDs
The following LEDs are visible at the Module’s front panel to indicate the
status of the module’s operation:
4.6.1 “BUS” LED
This green color LED is normally off and will flash on when the module is addressed by the system.
4.6.2 “PWR” LED
This red color LED is normally on when the Module is Powered up.

Manual 07500340 Model 3000-32
Page 16
Operation Manual
Chapter 5 Internal Settings
The following items are inside the module and can be reached by removing the side cover.
5.1 Fuse
The ASCOR VXI 3000-32 uses a 10 Amp fuse in the +5 Volt line and is located on
the Mother Board (MB) assembly.
5.2 VXIbus Interrupt Level Selection
The VXIbus interrupt level is set with three bits in the “3Eh” register.
See the section on “A16 ADDRESS SPACE REGISTER DESCRIPTION”.
The interrupt level is factory set to “no interrupt”.

Manual 07500340 Model 3000-32
Page 17
Operation Manual
Chapter 6 Specifications
SPDT relays: 48
Electrical:
Switching Voltage 277V AC, 110 V DC
Switching Current 5 Amps
Power Rating 625VA, 150 W
Life Expectancy 10,000,000 Mechanical
Contact resistance: < 0.400 ohms
Mechanical:
Thickness: 1.200 inches
Width: 10.317 inches
Length: 13.78 inches
Weight: 3 lbs.
Connectors: (J1-J4) 50 Pos, SMPL Series
Positronic SMPL50MOTOLB
Mate: 50 Pos, SGMC Series Positronic Industries, SGMC5OF0E1OOJO
Installation Kit: Installation Kit, 89800340 , available on request
Environmental Specifications
Temperature:
Operating: 0º to 55ºC
Storage: - 40º to 75ºC
Relative Humidity:
Operating: 0 to 90% non-condensing
Storage: 0 to 95% non-condensing

Manual 07500340 Model 3000-32
Page 18
Operation Manual
Chapter 8 Register Map
8.1 Model 3000-32S
This section provides the register map for Model 3000-32S
The following register map shows the signal name and register assignments for the Model
3000-32.
A16 Registers
Offset Value
00h CFB5h
7 = Register Based, A16/A24 Module
FB5 = VXI Manufacturer ID, ASCOR
02h 7F20h 7 = A24 space requirement
F20 = Model Number for this module
04h FFFCh
Bit 0, reset, is supported. Toggling this bit will clear
all relay registers.
06h (assigned by Resource Manager)
Control Bit
3Eh 0 Low true output enable to the relay coil driver IC’s.
1 When low enables read back of relay coil state
When high enables read back of data registers
2 High true EEPROM write enable
3-15 Don’t Care

Manual 07500340 Model 3000-32
Page 19
Operation Manual
1 X 24
Address offset 40h
Bit
Pin
SW
Section
0
J1-A
K-1
1
1
J1-B
K-2
1
2
J1-C
K-3
1
3
J1-D
K-4
1
4
J1-E
K-5
2
5
J1-F
K-6
2
6
J1-H
K-7
2
7
J1-J
K-8
2
8
J1-K
K-9
1
9
J1-L
K-10
1
10
J1-M
K-11
1
11
J1-N
K-12
1
12
J1-P
K-13
2
13
J1-R
K-14
2
14
J1-S
K-15
2
15
J1-T
K-16
2
1 X 24
Address offset 42h
Bit
Pin
SW
Section
0
J2-A
K-17
3
1
J2-B
K-18
3
2
J2-C
K-19
3
3
J2-D
K-20
3
4
J2-E
K-21
4
5
J2-F
K-22
4
6
J2-H
K-23
4
7
J2-J
K-24
4
8
N/C
K-25
N/A
9
N/C
K-26
N/A
10
N/C
K-27
N/A
11
N/C
K-28
N/A
12
N/C
K-29
N/A
13
N/C
K-30
N/A
14
N/C
K-31
N/A
15
N/C
K-32
N/A

Manual 07500340 Model 3000-32
Page 20
Operation Manual
1 X 32 with Terminators
Address offset 44h
Bit
Pin
SW
Section
0
J3-A
K-33
1
1
J3-B
K-34
1
2
J3-C
K-35
1
3
J3-D
K-36
1
4
J3-E
K-37
2
5
J3-F
K-38
2
6
J3-H
K-39
2
7
J3-J
K-40
2
8
J3-K
K-41
1
9
J3-L
K-42
1
10
J3-M
K-43
1
11
J3-N
K-44
1
12
J3-P
K-45
2
13
J3-R
K-46
2
14
J3-S
K-47
2
15
J3-T
K-48
2
32 X 1 with Terminators
Address offset 46h
Bit
Pin
SW
Section
0
J4-A
K-49
3
1
J4-B
K-50
3
2
J4-C
K-51
3
3
J4-D
K-52
3
4
J4-E
K-53
4
5
J4-F
K-54
4
6
J4-H
K-55
4
7
J4-J
K-56
4
8
J4-K
K-57
3
9
J4-L
K-58
3
10
J4-M
K-59
3
11
J4-N
K-60
3
12
J4-P
K-61
4
13
J4-R
K-62
4
14
J4-S
K-63
4
15
J4-T
K-64
4