manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Gigabyte
  6. •
  7. PCI Card
  8. •
  9. Gigabyte GC-WB1733D-I User manual

Gigabyte GC-WB1733D-I User manual

Other Gigabyte PCI Card manuals

Gigabyte GN-WIAG User manual

Gigabyte

Gigabyte GN-WIAG User manual

Gigabyte GN-WP01GS User manual

Gigabyte

Gigabyte GN-WP01GS User manual

Gigabyte GN-WI02GM User manual

Gigabyte

Gigabyte GN-WI02GM User manual

Gigabyte GN-WPEAG User manual

Gigabyte

Gigabyte GN-WPEAG User manual

Gigabyte GN-WP01GS User manual

Gigabyte

Gigabyte GN-WP01GS User manual

Gigabyte GC-WB11ACD-I User manual

Gigabyte

Gigabyte GC-WB11ACD-I User manual

Gigabyte GN-WPKG User manual

Gigabyte

Gigabyte GN-WPKG User manual

Gigabyte GN-FE605(M) User manual

Gigabyte

Gigabyte GN-FE605(M) User manual

Gigabyte GN-FE605 User manual

Gigabyte

Gigabyte GN-FE605 User manual

Gigabyte G1.ASSASSIN2 User manual

Gigabyte

Gigabyte G1.ASSASSIN2 User manual

Gigabyte GT-PS700 User manual

Gigabyte

Gigabyte GT-PS700 User manual

Gigabyte GN-WP01GT User manual

Gigabyte

Gigabyte GN-WP01GT User manual

Popular PCI Card manuals by other brands

Avermedia ER330 Quick installation guide

Avermedia

Avermedia ER330 Quick installation guide

ERMA SSI 1417 instruction manual

ERMA

ERMA SSI 1417 instruction manual

SIIG CyberSerial Dual PCI Software installation

SIIG

SIIG CyberSerial Dual PCI Software installation

Airlink101 AWLH3028 user manual

Airlink101

Airlink101 AWLH3028 user manual

Dolphin MXH932 user guide

Dolphin

Dolphin MXH932 user guide

I-Bus IBC2602 user guide

I-Bus

I-Bus IBC2602 user guide

ICP DAS USA PCI-1002H user manual

ICP DAS USA

ICP DAS USA PCI-1002H user manual

Exsys EX-60102 manual

Exsys

Exsys EX-60102 manual

Chelsio Communications T5 Series Installation and user guide

Chelsio Communications

Chelsio Communications T5 Series Installation and user guide

Conrad Electronic 97 46 71 operating instructions

Conrad Electronic

Conrad Electronic 97 46 71 operating instructions

Micro Innovations USB650A Quick installation guide

Micro Innovations

Micro Innovations USB650A Quick installation guide

KTI Networks KF-310 user guide

KTI Networks

KTI Networks KF-310 user guide

Intellinet 500517 user manual

Intellinet

Intellinet 500517 user manual

Asus SpaceLink WL230 user manual

Asus

Asus SpaceLink WL230 user manual

SIIG SC2475 Quick installation guide

SIIG

SIIG SC2475 Quick installation guide

TRENDnet TEW-703PI Quick installation guide

TRENDnet

TRENDnet TEW-703PI Quick installation guide

Pericom PI7C7100 manual

Pericom

Pericom PI7C7100 manual

ADLINK Technology cPCI-3548 user manual

ADLINK Technology

ADLINK Technology cPCI-3548 user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

GC-WB1733D-I
Installation Guide/安裝指南
安装指南/インストールガイド
Installationsanleitung
12WE6-WB1733I-12AR
- 2 -
Installing the Wi-Fi/Bluetooth Card • 安裝Wi-Fi/藍牙卡
安装Wi-Fi/蓝牙卡 • Wi-Fi/Bluetoothカードを取り付ける
Installation der Wi-Fi/Bluetooth-Karte
Antenna Connector
天線連接埠
天线连接端口
アンテナ コネクター
Antennenanschluss
Wi-Fi/Bluetooth Card
Wi-Fi/藍牙卡 • Wi-Fi/蓝牙卡
Wi-Fi/Bluetoothカード
Wi-Fi/Bluetooth-Karte
USB Connector
USB連接埠插座
USB连接端口插座
USBコネクター
USB-Anschluss
Antenna • 天線
天线 • アンテナ • Antenne
USB Cable • USB排線 • USB排线
USBケーブル • USB-Kabel
- 3 -
USB Cable • USB排線 • USB排线
USBケーブル • USB-Kabel
Step 1:
Install the Wi-Fi/Bluetooth card in a PCI Express x1
slot. Connect one end of the USB cable to the USB
connector on the Wi-Fi/Bluetooth card.
步驟一:
先將Wi-Fi/藍牙卡安裝至PCI Express x1 插
槽,接著將USB排線的一端接至無線/藍
牙卡的USB連接埠插座。
步骤一:
先将Wi-Fi/蓝牙卡安装至PCI Express x1插
槽,接着将USB排线的一端接至无线/蓝
牙卡的USB连接端口插座。
ステップ 1:
Wi-Fi/Bluetooth カードを PCI Express x1 スロ
ットに装着します。USB ケーブルの一方の
端を Wi-Fi/Bluetooth カードの USB コネクタ
に接続します。
Schritt 1:
Installieren Sie die Wi-Fi/Bluetooth-Karte in einem
PCI Express x1-Steckplatz. Verbinden Sie ein
Ende des USB-Kabels mit dem USB-Anschluss
auf der Wi-Fi/Bluetooth-Karte.
- 4 -
Step 2:
Connect the other end of the USB cable to the
F_USB connector on the motherboard.
步驟二:
再將USB排線的另一端接至主機板的
F_USB插座。
步骤二:
再将USB排线的另一端接至主板的F_USB
插座。
ステップ 2:
USB ケーブルのもう一方の端をマザー
ボードの F_USB コネクタに接続します。
Schritt 2:
Verbinden Sie das andere Ende des USB-Kabels
mit dem F_USB-Anschluss auf dem Motherboard.
- 5 -
Step 3:
Tighten the antenna cables to the antenna
connectors on the Wi-Fi/Bluetooth card
respectively.
步驟三:
將天線鎖至Wi-Fi/藍牙卡的天線連接埠。
步骤三:
将天线锁至Wi-Fi/蓝牙卡的天线连接端
口。
ステップ 3:
アン テナ ケーブ ル を そ れ ぞ れ Wi-Fi/
Bluetooth カードのアンテナコネクターに
しっかりと接続します。
Schritt 3:
Befestigen Sie die Antennenkabel gut an den
jeweiligen Antennenanschlüssen auf der Wi-Fi/
Bluetooth-Karte.
- 6 -
Step 4:
Then move the antennas to a place where the
signal is good.
步驟四:
完成安裝後將天線移至收訊良好處。
步骤四:
完成安装后将天线移至收讯良好处。
ステップ 4:
次に、ワイヤレス信号が受信し易い場所
にアンテナを配置します。
Schritt 4:
Setzen Sie die Antennen dann auf eine Stelle mit
gutem Signalempfang.
- 7 -
After the computer starts, install the
driver for the Wi-Fi/Bluetooth Card.
Adjust your wireless LAN configuration
based on your environment after
installing the driver.
啟動電腦後請安裝Wi-Fi/藍牙卡驅動
程式。完成後即可依環境中的無線
網路選擇連接。
启动电脑后请安装Wi-Fi/蓝牙卡驱动
程序。完成后即可依环境中的无线
网络选择连接。
コンピュータが起動した後、Wi-Fi/Bluetoothカードのドライバーをインストールし
てください。ドライバーをインストールした後に、ご使用の環境に基づいて、ワイ
ヤレスLANの設定を行います。
Hat sich der Computer hochgefahren, installieren Sie den Treiber für die Wi-Fi/Bluetooth-
Karte. Passen Sie nach Installation des Treibers Ihre WLAN-Konfiguration entsprechend
Ihrer Umgebung an.
Installing the Drivers and Utilities • 安裝驅動程式及工具
安装驱动程序及工具 • ドライバとユーティリティをインストールする
Installation der Treiber und Dienstprogramme
- 8 -
Regulatory Notices
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: PCIe add-in card
Trade Name: GIGABYTE
Model Number: GC-WB1733D-I
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
CAUTION:
The manufacturer is not responsible for any interference caused by unauthorized modifications and/or use of unauthorized
antennas. Such changes and/or modifications not expressly approved by the party responsible for compliance of this device could
void the user’s authority to operate the equipment
RF exposure statement / Antenna Use
Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to
lower output power if such function is available.
•Do not touch or move antenna while the unit is transmitting or receiving.
•Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body,
especially the face or eyes, while transmitting.
•Do not operate the radio or attempt to transmit data unless the antenna is connected; this behavior may cause damage to the
radio.
United States of America, Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- 9 -
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Notice for 5GHz
Operations in the 5.15-5.25GHz band are restricted to indoor usage only. (For 5GHz only)
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian
ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Canada-Industry Canada (IC) Regulatory statement
This device complies with Canadian RSS-210.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil se conforme aux normesCanada d’Industrie de RSS permis-exempt. L’utilisation est assujetti aux deux conditions
suivantes: (1) cet appareil ne peut pas causer d’interférences, et (2) cet appareil doit accepter des interférences, y compris des
interférences qui peuvent causer desopérations non désirées de l’appareil.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15-to 5.25-GHz
frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to
reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary
user of the 5.25-to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this
device. The maximum allowed antenna gain for use with this device is 6dBi in order tocomply with the E.I.R.P limit for the 5.25-to 5.35
and 5.725 to 5.85 GHz frequency range in point-to-point operation. To comply with RF exposure requirements all antennas should
be located at a minimum distance of 20cm, or the minimum separation distance allowed by the module approval, from the body of
all persons.
Attention: l’utilisation d’un réseau sans fil IEEE802.11a est restreinte à une utilisation en intérieur à cause du fonctionnement dansla
bande de fréquence 5.15-5.25 GHz. Industry Canada requiert que ce produit soit utilisé à l’intérieur des bâtiments pour la bande
de fréquence 5.15-5.25 GHz afin de réduire les possibilités d’interférences nuisibles aux canaux co-existants des systèmes de
transmission satellites. Les radars de puissances ont fait l’objet d’une allocation primaire de fréquences dans les bandes 5.25-5.35 GHz
et 5.65-5.85 GHz. Ces stations radar peuvent créer des interférences avec ce produit et/ou lui être nuisible. Le gain d’antenne
maximum permissible pour une utilisation avec ce produit est de 6 dBi afin d’être conforme aux limites de puissance isotropique
- 10 -
rayonnée équivalente (P.I.R.E.) applicable dans les bandes 5.25-5.35 GHz et 5.725-5.85 GHz en fonctionnement point-à-point.
Pour se conformer aux conditions d’exposition de RF toutes les antennes devraient être localisées à une distance minimum de 20
cm, ou la distance de séparation minimum permise par l’approbation du module, du corps de toutes les personnes.”
Radiation Exposure Statement:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
Selon les règlements de Canada d’Industrie, cet émetteur de radio peut seulement fonctionner en utilisant une antenne du typeet
de gain maximum (ou moindre) que le gainapprouvé pour l’émetteur par Canada d’Industrie. Pour réduire lesinterférencesradio
potentiellesavec les autres utilisateurs, le type d’antenne et son gain devraient êtrechoisis de façon à ce que la puissance isotrope
rayonnée équivalente(P.I.R.E.)ne soit pas supérieure à celle qui estnécessaire pour une communication réussie.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive
2014/35/EU, Radio Equipment Directive (RED) 2014/53/EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement.
This product has been tested and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU) 2015/863
Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP,
DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE
are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) (recast)
directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their
components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed
of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment,
collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local
government office, your household waste disposal service or where you purchased the product for details of environmentally safe
recycling.