Gigastone Smart Box A2-25DE User manual

Quick Start Basics
1 Power On:
Press on/off button for 5 seconds and blue LED square lights up,then green
LED lights on.
2 Power Off:
Press on/off button for 5 seconds and all LED lights are out.
3 Charge In / Charge Smart Box:
Plug microUSB cable to Smart Box ; plug the USB end to a USB wall
charger or a working computer. It is suggested to fully charge the battery
before first use.
4 Charge Out / Charge Mobile Devices Using Smart Box:
Connect mobile devices to the USB port on Smart Box . Press on/off
button for 1 second to charge out.
5 Apps:
Search key word “Smart Box A4” in Apple App Store or Google Play.
6
Configurations:
Tap “Settings” icon on the bottom right corner of the app main page.
Internet Bridge: see section 7.
Change Devices SSID and Password:
It’s highly recommended you change the default SSID and password for added security.
Smart Box Default Setting: Reset to factory default
Change Administrator Password: default password is 0000.
How-To’s For
Android Smartphones & Tablets
1
Search “Smart Box A4” app in Google Play and install
FCC ID:
PLE-WD2502
USER MANUAL
How-To’s For
iPhone / iPad / iPod Touch
2
Connect to Smart Box:
in “configurations”.
Turn on Smart Box first. Go to “settings” “wifi-networks” on IOS device
and connect to “ Smart Box ”.
We recommend you change the wifi name and password. See instructions
Insert your USB or SD card that carries your preloaded media/contents.
Launch the Smart Box app. Go to either “USB” or “SD” depending on
what is plugged in. All pre-made folders will show under “folder”. All floating
files will be automatically organized by its format and shown under one of
To access contents, select the file to bring up a visual. Select media player
if prompted. See supported file formats in “media files supported” section of
this manual. To return to the Smart Box contents at any time, tap “ Smart
Box ” icon on the bottom left corner or “ Back” button on upper left corner.
3
Play Contents:
the sub categories.
To download a single file, press file name and hold till dialogue window
appears, then select “download”.To download multiple files, click “edit”
button in upper right corner, select files, then press download.
Music and video downloads are saved in “local media” tab on the bottom of
4
Download Files:
the app. Documents are saved in “Document” tab. Photos are saved in the
photo library of your mobile device.
5
Upload Photos:
Click “Photo Upload” tab from the bottom of the app. Select an album, click
“select”, make your image(s) selection, then define destination, click “upload
to Smart Box ” to save.
7
Configurations:
Under “setting”, click “Internet Bridge”. Put in admin password (default 0000)
and slide to “on” position.Wait for a second for system to search for available
networks. Select a network to join. Please note, internet bridge mode consumes
more power.
2
Connect to Smart Box
Turn on Smart Box first. Open wifi network settings and connect to “Smart
Box” wifi. A connection indicator icon should appear. We recommend you change
the wifi name and password. See instruction
in “configurations”.
3
Play Contents:
Insert your USB or SD card that carries preloaded contents. Launch the
Smart Box app.Tap “Smart Box” on upper left corner. Go to either “USB” or
“SD” depending on what is plugged in. Select a file, click to play. Select
media player when prompted. See supported file formats in “media files
supported” section of this manual.
CHARGE OUT
USB DRIVE
RESET
Reset SDHC Slot USB Charge Out
SD CARD READER INTERNET BRIDGE
CHARGE IN
USB DATA
PC Data
Charge In
On/Off
Internet Bridge Indicator
Card Reader Indicator
Battery Indicators
(see chart below)
Power
Features
Definition of LED Battery Indicators
To check the battery life of the Media Streamer, press
on/off button for 1 second and read LED as stated above.
3 green LED: 80%-100% battery
2 green LED: 40%-80% battery
1 green LED: <40% battery
0 green LED: 0% battery if not
connected to power; 100% battery
if connected to power
Definition of LED
Blue LED on when internet bridge
is enabled
Orange LED on when SD card is
detected. Orange LED flashing
when SD data in transmission
1
Search Keyword “Smart Box A4” app in Apple App Store and install
Smart Box
Smart Box

How-To
Access Content via Web Browser*
PRODUCT SPECIFICATIONS
MEDIA FILES SUPPORTED
Observe the following carefully to avoid damage, fire, or burst of the product:
Do NOT attempt to disassemble, modify or repair the product by yourself.
Do NOT drop or hit this product. Doing so may damage the product.
Do NOT place or store the product:
- In a dusty place
- In a car or a place exposed to direct sunlight, or a places that become hot
- In a moist place or a place where condensation may occur
- In a place where a magnetic field is generated
Do NOT attempt to charge or use the device outside the specification limits.
Smart Box
MicroUSB cord
User Manual
CERTIFICATIONS
FCC ID: PLE-WD2502 CE
6
Configurations:
Tap “Settings” icon from the drop down menu on upper left corner.
Enter 0000 (default password)
Internet Bridge: see section 7.
Change Devices SSID and Password: It’s highly recommended you change the
default SSID and password for added security.
Smart Box Default Setting:Reset to factory default
Change Administrator Password:default password is 0000.
7
Internet Bridge:
Under “settings”, click “Internet Bridge”. Slide to “on” position. Wait for a
second for system to search for available networks. Select a network to join.
Please note, Internet Bridge mode consumes more power.
4
Download Files:
To download a single file in “ Smart Box ”, choose the file to be downloaded,
press and hold till dialogue window appears, then select file “download”.
be accessed through “Download” tab on the drop-down menu next to Smart
To download multiple files, press icon, then select files Tap to
download, or tap to select path and download. All download files can
Box icon.
5
Upload Files:
Click “Local Drive” tab from the drop down menu on upper left corner, select
a file, press and hold until dialogue window pops, tab “upload”, define destination,
click “ok” to save.
1
Connect to Smart Box:
Turn on Smart Box first. Open wifi network settings and connect to
“ Smart Box ” wifi.
2
Open a web browser, type in URL field IP address 192.168.1.2
Go to either “USB” or “SD” depending on what is plugged in. Click on file
names to view content in a new window.
*Note: requires browsers compatible with JavaScript and HTML5 and
applications capable of reading the associated file types.
To download, click on the arrow next to the file name.
Browsers and applications not included.
Product Name:
Part Number:
Dimension:
Weight:
Li-ion Battery:
Charge In/Out:
Wireless I/F Wi-Fi:
WiFi Outreach Approx.
WiFi Operation time:
WiFi Standby time:
Operation Temp.
Smart Box
A2-25DE
75 x 60 x 16 (mm)
88 (g)
2500mAh
DC 5V / 1000mA
SD Card: SD, SDHC, SDXC
USB Drive: 2.0/3.0
USB A for charge out and data
802.11b/g/n
Up to 20 meters / 66 feet
Up to 8Hrs
Up to 16Hrs
0° C ~ 40° C
micro USB for charge in
*Caution: charging in temperatures outside this range could cause serious
damage, including fire.
Operating System
Photo
Audio
Video
Document
Supported
iOS 5.0 and later; Android v2.2
Mac OSX 10.4 and later; Linux Kernal 2.4 later
JPG, PNG, BMP
MP3, M4A, AAC, WAV
MP4, MOV, M4V
DOC, DOCX, PPT, PPTX, XLS, XLSX, PDF, TXT,
and later; Windows 8/7/Vista/ XP;
HTM
CAUTIONS
PACKAGE CONTENTS
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference to by one or more
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
- Consult the dealer or an experienced radio/TV technician for help.
the receiver is connected.
WARRANTY
1 Warranty Policy
Gigastone provides replacement or repair service to our customers for defective
products within the applicable warranty period.
See
http://www.gigastone.com.tw for details.
2 Limitation of Warranty
Please note Gigastone is not responsible for providing free repairs
if the product defect is caused by any of the following factors:
(1) Damage caused by natural calamity or any inappropriate usage.
(2) Product has been repaired or taken apart by unauthorized technicians.
(3) The warranty label is alerted, damaged or missing.
(4) Product serial number does not confirm to our original system or the label
(5) Products purchased from unauthorized agents.
(6) The limited warranty covers only repairs or replacement of Gigastone products.
the source of system problems, removing,servicing or installing Gigastone products.
has been damaged.
Gigastone is not liable for any loss of data or any cost incurred from determining
3 Disclaimer
(1) The warranty Gigastone provides on Gigastone products (“products”) is
limited to repair and replacement of in-warranty products, exclusive of data
recovery and back up. Gigastone shall not be liable for any damage
(2) Gigastone shall in no event be liable for any defect, damage or data lost
occurred during the delivery of in-warranty products. Prior to claiming warranty
service, Gigastone recommends that you have a backup of your data and
(3) In no event shall Gigastone be liable under this statement for loss of profit,
loss of anticipated saving, loss of data, or indirect, incidental or consequential
losses or damages to the extent that those losses or damages can be
and/or loss of data stored in products.
remove your data from in-warranty products.
disclaimed by law.
7 RMA Information
For RMA needs, please contact the local reseller where the purchase was made
(4) Since Gigastone products are not designed for high-safety applications,
Gigastone does not recommend applying the products in life support systems
or other equipment which may lead to personal injury or deathif such equipment
are defective or have a breakdown, including but not limited to medical or
traf
fic control equipment, disaster prevention systems, combustion control
system and nuclear energy system. Gigastone shall not be liable for any
personal injury or death or any loss or damages to property arising from
medical-related equipment, military or military-related equipment, aircraft,
such kind of application.
warranties and representations,whether in oral or written, between you and
of merchantability or fitness for a particular purpose, whether expressly or implied.
Gigastone. Gigastone makes no other warranties, including any warranty
This warranty is solely and entirely on the products and supersedes all other
warranty period on products, Gigastone will, in such country/region, with
respect to the products, provide technical support and warranty service to
local consumers in accordance with such stipulation.
In the event that the law of certain country/region stipulates a maximum
the implied warranty on the products during Gigastone’s expressed warranty
In the event that the law of certain country/region prohibits the exclusion of
implied warranty, Gigastone shall, in such country/region, only be liable for
period.
4 Customer eligible for warranty service.
Gigastone warranty policy applies to all customers who purchased Gigastone
products through authorized agents.
5 Duration of Warranty
Smart Box series products are covered by one-year warranty.
NOTE: Please note that after Gigastone issues a product’s “END-OF-LINE”
repairing the item under warranty. Please visit Gigastone Legacy Products.
(E.O.L) notice, Gigastone will offer a comparable substitute product instead of
6 Additional Remark
(1) Gigastone under no circumstance will be responsible for the information or
Gigastone recommends for customer to do a data back up in advance before
data stored in the Gigastone products claimed by warranty.
sending their products for warranty service.
(2) Some products may require the use of non-original replacement parts during
maintenance and repair, so the final repaired products may contain non-original
components.
(3) In the event of a warranty request for a product that has been discontinued
or is no longer serviced, Gigastone will, at its discretion, offer a comparable
substitute product instead of repairing the item under warranty.
(4) When the customers are returning authorized products to Gigastone they
are responsible for one way transportation cost and insurance. Gigastone will
cover one way transportation cost for those materials under warranty when
returning back to customer. However, all related cost for nationalization is
customers’responsibility.
for help or Gigastone can provide RMA service from corporate headquarters..
Please refer to http://www.gigastone.com.tw for detailed information.
Gigastone
No.69, Qun Yi Rd., Jhunan,Miaoli, Taiwan 350, R.O.C.
Tel: [phone] #321
Email: [e-mail]
Website: www.gigastone.com