Gigawave G-AP-LITE-48 User manual

High Power Ceiling Wireless AP
11ac 1200Mbps Wave2 Ceiling Wireless AP
Model:
Description:
This is an 11ac Wi-Fi standard Qualcomm Chipset high power industrial Ceiling Wireless Access
Point support Wave2 , combined 1200Mbps Wi-Fi speed over 2.4GHz(300Mbps) and 5GHz(900Mbps),
equipped Gigabit WAN & LAN port, fast Ethernet data rate make more than 100 end users can access
into the device with faster Ethernet, make them to enjoy seamless HD movies, streaming, online gaming,
wireless security and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office,
sho
pping mall...
High Power for more range and stable signal
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, 5dBi MIMO
high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply the stable
Wi-Fi signal for users.
Wave 2 Technology
With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input
Multiple-Output), 4 Spatial Steams, greatly to improved the communication efficiency.
Power over Ethernet
It has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So
it can be installed in areas where power outlets are not readily available, eliminating the mess of altering
G-AP-LITE-48

High Power Ceiling Wireless AP
existing network infrastructure.
Seamless roaming and 5G prior
fast seamless roaming, users can switch to the wireless AP which with strong signal for
stable performance. What’s more, it support 5G prior, user can connect to more broadband 5.8G
networking for fast Ethernet.
Access Controller System & Cloud Management System
With Access Control System, easily access advanced network settings through PC, like AP status
monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
Then work with Cloud Management System, easy to do central and remote management, advertisement
and multiple captive portal authentication make this AP more professional in Wi-Fi Projects.
Main Features:
Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate
1 10/100/1000Mbps WAN Port, 1 10/100/1000Mbps LAN Port, faster Ethernet.
500mW high power, build in 5dBi MIMO antenna, stronger signal strength, more wireless coverage,
16M Flash, 128M DDR2 RAM, more user, more stable
Support active IEEE 802.3at 48V PoE standard
Support SSID broadcasting, Multi SSID up to 8 (4 SSID in 2.4GHz, 4 SSID in 5GHz)
Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode,
suit for more application scenarios.
With function of build in firewall, IP filter, URL filter and MAC filter
Comply with IEEE 802.3az standard, RF power adjustment, auto channel, and channel analyzer for
better application in different environment
Support 5G prior, seamless roaming
Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security
Product Spec.:
It supports
Hardware:
Chipset Qualcomm QCA9563 + QCA9886 +QCA8334
Standard 802.11ac/b/g/n, MIMO technology
DDR 128MB
Flash 16MB
Interface 1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
1 * Reset button, press 15 seconds to revert to default setting
Antenna Build in 5dBi MIMO Antenna
DC 12V 1.5A

High Power Ceiling Wireless AP
POE（WAN）48V 0.5A
Power consumption <15W
LED indicator WAN, LAN, Sys, 2.4G_WiFi, 5G_WiFi.
Size 198mm * 198m * 32mm
Weight
RF Data
Frequency
2.4G:802.11b/g/n: 2.4GHz –2.484GHz，
5GHz:802.11a/n/ac: 5.150GHz～5.850GHz
Country code FCC、IC、ETSI、MKK、MKK1、MKK2、MKK3、NCC、RUSSIAN、CN
Modulation OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM
DSSS = DBPSK, DQPSK, CCK
Throughput 1200Mbps
2.4G RF Power 802.11b 11M 24±2dBm 1M 26±2dBm
802.11g 54M 23±2dBm 6M 25±2dBm
802.11n HT20 MCS7 22±2dBm MCS0 24±2dBm
802.11n HT40 MCS7 22±2dBm MCS0 24±2dBm
5G RF Power 802.11a 54M 21±2dBm 6M 24±2dBm
802.11n HT20 MCS7 21±2dBm MCS0 24±2dBm
802.11n HT40 MCS7 20±2dBm MCS0 23±2dBm
802.11ac HT80 MCS9 19±2dBm MCS0 22±2dBm
2.4G Receive
Sensitivity
802.11b 11M -85dBm 1M -94dBm
802.11g 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
5G Receive
Sensitivity
802.11a 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
802.11ac HT80 MCS9 -58dBm MCS0 -85dBm
EVM 2.4G: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28 dB
5G: 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
PPM ±20ppm
Max Users 128+
Firmware Features:
Operation mode Wireless AP, Gateway, WISP, WiFi Repeater
WAN Type Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)
Firewall DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
Protocols IPv4
Others:

High Power Ceiling Wireless AP
Package Contents 1200Mbps Dual Band wireless access point
Ethernet Cable
Quick Installation Guide
Setting Accessory
Environment Operating Temperature: -30~55 ℃
Storage Temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
Management Firmware GUI , Remote Management, WLAN Controller, Cloud Management
System
Working Diagram