Girard-Perregaux LAUREATO TOURBILLON User manual

USER MANUAL
LAUREATO TOURBILLON

INSTRUCTIONS FOR USE
WINDING
The self-winding system keeps your watch wound if you wear it at least 14 hours a day. If your watch
has not been worn for some time, rewind it manually.
Crown in two positions:
0. Manual-winding position (crown not pulled out).
1. Time setting position (crown fully pulled out).
Manual-winding
Your watch requires regular winding to work normally.
To wind, turn the crown backward and forward when it is in position 0). When fully wound, your
watch has a power reserve of approximately 50 hours.
Warning: do not force the crown once the resistance increases as this could damage the movement.
SETTING THE TIME
1. Pull your crown out to the time setting position 1).
2. Turn your crown clockwise to position the hour and minute hands at the selected time. At the
time signal, push the crown back to position 0). Your watch will restart immediately.
Warning: after making any setting, always return the crown to its original position, to preserve
the water resistance of your watch and prevent any damage to the mechanism. To do so, press
the crown against the case in position 0).

FUNCTIONS
a | Hours
b | Minutes
c | Tourbillon
GIRARD-PERREGAUX GP09510
SELF-WINDING MECHANICAL MOVEMENT
Diameter: 36.10 mm (16‘’’)
Height: 5.75 mm
Frequency: 21,600 Vib / hour ( 3 Hz )
Jewels: 33
Number of components: 261
Power reserve: minimum 48 hours
Displays: tourbillon, hours, minutes
CASE
Diameter: 45.00 mm
Height: 11.96 mm
Crystal: antireflective sapphire
Case-back: sapphire crystal, secured by 6 screws
Water-resistance: 30 meters (3 ATM )
a
c
b

MDE-0067
www.girard-perregaux.com