Gision GS-9103G User manual

User Manual for Mobile DVR
1
4CH Mobile DVR USER MANUAL
GS-9103G /GS-9203/GS-9303
Ver. 1.0
Contents
1. System Introduction....................................................................................................................................... 2
1.1. Features..............................................................................................................................................2
1.2. Appearance........................................................................................................................................ 3
1.3. Remote Control .................................................................................................................................4
1.4. Front panel......................................................................................................................................... 5
1.4.1. LED indicators:...................................................................................................................... 5
1.4.2. Others .................................................................................................................................... 6
1.5. Back panel.........................................................................................................................................6
2. Specifications ................................................................................................................................................ 7
3. Technique Parameters.................................................................................................................................... 8
4. GUI................................................................................................................................................................ 9
4.1. Login .................................................................................................................................................9
4.2. System Main Interface....................................................................................................................... 9
4.3. Video Records Playback..................................................................................................................10
4.4. System Settings ............................................................................................................................... 11
4.4.1. Basic Settings ...................................................................................................................... 11
4.4.2. Recording Settings............................................................................................................... 12
4.4.3. Power Management.............................................................................................................14
4.4.4. Alarm Settings..................................................................................................................... 15
4.4.5. Security Settings.................................................................................................................. 18
4.4.6. Network Settings:................................................................................................................ 18
4.5. System Info...................................................................................................................................... 21
4.6. Management Tools........................................................................................................................... 21
4.6.1. Log Management................................................................................................................. 22
4.6.2. SD Card Management .........................................................................................................23
4.6.3. Default Settings ...................................................................................................................24
4.6.4. Config Management............................................................................................................ 24
4.6.5. System Upgrade................................................................................................................... 25
5. Installation guideline................................................................................................................................... 26

User Manual for Mobile DVR
2
5.1. FB7001 and FB7002 Pictures.......................................................................................................... 26
5.1.1. FB7001 ................................................................................................................................ 26
5.1.2. FB7002 ................................................................................................................................ 27
5.2. Cables.............................................................................................................................................. 27
5.2.1. Power Cable......................................................................................................................... 27
5.2.2. GPS Antenna........................................................................................................................ 28
5.2.3. AV input /output cable......................................................................................................... 28
5.2.4. Alarm input and output cable .............................................................................................. 29
6. Device Upgrade Guideline.......................................................................................................................... 30
6.1. GS-9103G-*******.crc（Document system）upgrade.............................................................. 30
6.2. GS-9203G -*******.crc（Application program）upgrade....................................................... 31
6.3. MCU upgrade ................................................................................................................................31
7. 3G User Guideline....................................................................................................................................... 31
7.1. Working System Representation...................................................................................................... 31
7.2. Parameter Settings...........................................................................................................................32
7.2.1. Network Setting ................................................................................................................. 32
7.2.2. Wireless setting ..................................................................................................................33
7.2.3. Statues check out................................................................................................................ 34
7.3. PC software setting.......................................................................................................................... 34
8. F.A.Q........................................................................................................................................................... 35
System Introduction
1.1. Features
H.264 main profile Video compression format; Support 1 to 4 channels video input.
Adopt 10bit video decoder processor to ensure picture quality, and each video channel is attached with an
independent video decoder to avoid disturbing from each other.
Industrial grade design: all electronic components conform to industrial standard through the entire design,
including the special connectors dedicated for mobile DVR.
Built-in GPS, G sensor (optional).
Built-in wireless module like 3G (EVDO, HSPA, HSDPA), GPRS, WiFi (optional).
Support IP call function (optional).
G.726 audio compression, 4CH audio input, 1CH audio output.
With the special UPS technology, the DVR will work for another 10 to 15 sec after power failure, which
makes the device shut down normally and keep the file safe
Real time recording: 100f/s (PAL); 120f/s (NTSC). Recording resolution: CIF/ 2CIF/ D1 optional,
maximum support 2CH of D1 + 2CH of CIF.
6CH alarm input (Level input), 1CH alarm output (Relay output)

User Manual for Mobile DVR
3
RS232 interface for remote control; RJ45 10M/100M Ethernet port.
Video recording mode: Auto, alarm, timed and manual recording.
The video file format is ASF. The file can be played by general media player VLC or our customized
software which support 1 channel or 4 channels synchronous playback
Storage: Maximum 1pcs 2.5”hard disk with removable hdd housing plus 1pcs 32 GB SD card. Support
HDD heater funtion, and SD card connector import from Japan
Quick start-mode: the device will turn to working in 25 sec after power on. Other start- or close- mode
includingACC on, timed turn on/off, manual boot/shutdown the device.
Voltage supply range is from 8V to 36V, the DVR is compatible with the most of vehicles. Power output is
12V/1.5A.
Energy- efficient design, the power consumption is less than 5W with normal operating state.
With anti-vibration and anti-high temperature protection, the quality of video files is always guaranteed
Operating temperature: -25℃to +70℃
All materials and PCB production conform to RoHs standard.
Elegant and industrial design: Mini size, for easy installation, more concealing.
Dimensions: 160(W) x200(H) x62(D) mm Weight: 2200g
1.2. Appearance
Front view:
Back view:

User Manual for Mobile DVR
4
1.3. Remote Control
KEY
Function
Picture
To activate the device
【LOGIN】
To enter system settings.
【0－9】
【0－9】: Under the configuration mode, 0~9 stand for numbers; under
the playback mode, 1, 2, 3 and 4 are for switching between related
single channel, and the number 5 is for 4 channels synchronous
playback
【－】【 ＋】
For setting date and time
【DEL】
Backspace
【EXIT】
Return to the previous interface
【ENTER】
Enter button
▲, , ,
up, down, left, right
left and right buttons are use for decreasing or increasing volume
【GOTO】
Select time period for playing video
【INFO】
To display system info under monitoring mode
With the backward playing button, the video files can be played with
2/4/8/16 times speed. Press „play‟ button to get a normal speed play.

User Manual for Mobile DVR
5
Play button
With the forward playing button, the video files can be played with
2/4/8/16 times speed forwardly. Press „play‟ button to get a normal
speed play.
ReseGSed
Stop button is to stop the normal playing and return back to the playlist
interface
Pause button. Pause the normal playing.
【F1】
For FB7002 only. Under monitoring mode, it is used to display the info
of G-sensor, GPS, wireless module, SIM card, dial-up and so on.
【F2-F3】
ReseGSed
1.4. Front panel
1.4.1. LED indicators:
【PWR】Power LED：LED light means system has powered on
【ALM】Alarm LED
【REC】Record LED: LED Light means device is recording

User Manual for Mobile DVR
6
【HD】HDD
【GPS】GPS signal
【ERR】Erro promt
【V-Loss】Video Loss
【HTR】Heater
【SD】SD card
【NET】Network
1.4.2. Others
【IR】Infrared receiving terminal
【LOCK】HDD Lock, device cannot to start without lock
【MIC】MIC input
【EAR】EAT output
1.5. Back panel
●【PWR】Power connector
●[2]【GPS】GPS antenna connector
●【EXTEND I/O】Extend I/O connector
●【RJ45】Network connector
●【AV IN】AV inpurt connector
●【AV OUT】AV output connector
●[2]【WIFI】WIFI antenna connector
●[2]【3G】3G antenna connector
[2]:：GPS 、WIFI and 3G antenna use for device FB7002

User Manual for Mobile DVR
7
2. Specifications
Function
Item
Description
Recording
System
Channel
1-4 channels
Resolution
Support CIF、HD1、D1 resolution, compatible with 2CH of D1 & 2CH of CIF. fps:
1 to 25f/s/ch adjustable (PAL) or 30f/s/ch (NTSC) .
Video Quality
1-4 levels, 1 is the highest level and 4 is the lowest level.
OSD
Overlays information such as date time and vehicle ID
SD card REC
Support two SD card recycle recording. Automatically switch to the other one
when the first SD card was full, and the data will be automatically overwritten .
Recording Mode
The default setting is auto recording after power on. Timed recording and alarm
recording are supported.
Preview
Support 1 channel and 4 channels preview.
Disk Data
overwritten
Support SD cards overwritten function.
Playback
System
Video Search
Search video files anytime per day, type(n/a) and target SD card.
Playback
Support 1 to 4 channels playback.
Support forward and backword play at the speed of: x 2,x4,x8,x16.
GUI
Graphical User
Interface
Setup system parameters with the remote control.
Alarm
Input
Support up to 6 channels alarm input.
Pre-record 10 seconds ahead of the alarm.
Record duration after alarm can be set in system
Output
Support up to 1 channels alarm output, level signal.
Optional
Function
GPS
GPS module can be built-out device FB7002, the GPS info will be recorded
synchronous；FB7001 Support external GPS module
Network
RJ45 Ethernet port.
FB7001 and FB7002 supports several wireless modules such as 3G and WIFI
G Sensor
Built in G-sensor is available with FB7001 and FB7002
Others
Power Settings
System auto power on/off:
1,Vehicle acc on/off---system auto power on after acc on, system power off
according to the delay time (up to 240min, default 5min) after acc off.
2,Preset time---Only according to time preset table.
Power-off
protection
With the power-off protection, all data can be saved safely and the recording can
be closed normally after power failure.

User Manual for Mobile DVR
8
3. Technique Parameters
System
Processor/System
Hisilicon Hi3512 H.264 main profile Linux(2.6)
Security
Two level password protections for administrators and users
Video/Audio& Alarm
Video Input/Output
Input: 4 CVBS, 1.0Vp-p, 75Ω; Output: 1 CVBS, 1.0Vp-p, 75Ω
Video Stream Standard
Standard ISO14496-10
Revi Function
1 channel or 4 channel revi mode
Audio Input/Output
Input: 4 channel Output: 1 channel
Audio Recording
Synchronized with video
Audio Compression
G.726 5KB/s
Alarm Input/Output
6 channels input;1 channel output
Video Recording
Recording Resolution
D1/HD1/CIF, MAX:2 channels of D1 and 2 channels of CIF
Record Quality
1-4 levels, 1 is the highest level and 4 is the lowest level.
Record Mode
Default:Auto Record. Other modes: Timed and Alarm Record (Optional)
Record Storage
Maximum support one 32GB SD card and one 2.5 inch hard disk.
Record Search
Search Video Record according to record time, record mode and record storage
device etc.
Record Playback
Max support 4 channels playback synchronous.
Others
Communication Interface
RS232 interface for remote control; RJ45 10M/100M Ethernet port.
Wireless Transfer
Built-in 3G (WEVDO,CDMA200,TD-SCDMA) or optional GPRS,WIFI and EDGE
Module
GPS and G-Sensor built-in
Temperature/Humidity
Normal Temperature: 0℃~ +50℃Heater: -25℃~ +50℃Humidity: 20% to 80%

User Manual for Mobile DVR
9
4. GUI
4.1. Login
LOGIN
LOGIN
DEV NO
DEV NO ： ：00000 00000（ （00000 00000） ）
USER NAME
USER NAME ： ：user / admin user / admin
PASSWORD
PASSWORD ： ：****** ******
CANCELLOGIN
Factory Default Username: admin
Factory Default Admin Password: 888888
Factory Default User Password: 111111
4.2. System Main Interface
The main interface will be displayed on the screen when you login successfully, it contains

User Manual for Mobile DVR
10
4.3. Video Records Playback
Select „Playback‟icon with left/right/up or down key and press „enter‟key to get below interface
REC SEARCH
REC SEARCH
REC TYPE：ALL/ALARM
DISK SELECT：SD/HDD
DATE：2009/05/27
START TIME：00：00
END TIME：23：59
31
31
30
30
29
29
28
28
27
27
26
26
25
25
24
24
23
23
22
22
21
21
20
20
19
19
18
18
17
17
16
16
15
15
14
14
13
13
12
12
11
11
10
10
09
09
08
08
07
07
06
06
05
05
04
04
03
03
02
02
01
01
SEARCH
Note:
System will highlight the valid recording info in yellow color
"REC TYPE": press the【Enter】button to selectAll or Alarm. The default setting isAll.
“DISK SELECT ": press the【Enter】button to select the SD card: The default setting is SD1.
"DATE": Default is current day. Press digit keys to reset
"START TIME": Press digit keys to setup the start time, default setting is 00:00.
"END TIME": Press digit keys to setup the end time, default setting is 23:59.
"SEARCH": Take curser move to "SEARCH" and press the【Enter】key to see the result.
SEARCH RESULT
SEARCH RESULT
TYPE RES START END CH SIZE
Normal D1 15：30 16：00 1 154M
Alarm D1 15：30 16：00 2 153M
Normal CIF 15：30 16：00 3 100M
Alarm CIF 15：30 16：00 4 98M
DATE：2009/05/27
FIRST UP LASTDOWN

User Manual for Mobile DVR
11
Press direction keys to view recording information, press【Enter】to play , press【ESC】to return back;
Press direction keys to select "FIRST", "UP", "NEXT", "LAST", and press 【ENTER】to enter the
corresponding page.
4.4. System Settings
SYSTEM SETUP
SYSTEM SETUP
4.4.1. Basic Settings
BASE SETUP
BASE SETUP
DATE TYPE：Y/M/D
DATE：2009/05/27 09：01：30
TIMEZONE：GMT +08（00~+12 / -01~-12 ）
SAVE
IDLE TIME：30（s）（Default 30 senconds）
Three type：Y/M/D, D/M/Y, M/D/Y
COMPANY NAME：Company Name
VEHICLE NO：00000
DRIVER NAME：Driver Name
DEV NO ：11111 (Default 30 senconds）
LINE NO：Line number
“DATE TYPE”: year/month/day, day/month/year or month/day/year. Press 【ENTER】to select.
"DATE": system date, press【ENTER】and then press【－】or【＋】 to setup, press【ENTER】again to confirm
the settings. Press left/right to select year/month/day and repeat above steps.
"TIME": The same setup as “DATE”.
"OPR TIMEOUT": All system Interface closed time, default time is 30s. Press digit keys to setup the operating

User Manual for Mobile DVR
12
closing time.
"DEV NUM": It refers to the device ID. Press digit keys to setup the ID.
"COMPANY NAME", "VEHICLE NO", "DRIVER NAME",”LINE NUM”: Press 【Enter】key to get the
keyboard window displayed, and use left/right/up/down/enter key to setup.
Select “SAVE” and press 【ENTER】to save the settings.
4.4.2. Recording Settings
RECORD SETUP
RECORD SETUP
SYSTEM：PAL/NTSC
ALARM DELAY：30（30～1800S）
OVER WRITTEN：ON/OFF
RESOLUTION：D1/HD1/CIF
AUDIO ：ON/OFF
ON/OFF
ON/OFF
25/30
25/30
1
1（ （1~5 1~5） ）
CH1
CH1（ （1~4 1~4） ）
RECORD
RECORD
FRAME RATE
FRAME RATE
QUALITY
QUALITY
CHANNEL
CHANNEL
TIME SLICE：15/30/45/60 (MIN)
TIME LIST SAVESUB-STREAM
BITRATE：（D1）2048 /2000 /1600 /1400 /1200 /1000 / 800 /600
（HD1）1500 /1300 /1100 /900 /800 /700 /600 /500
（CIF）1200 /1000 /800 /700/ 600/ 500/ 400 /300
RECORD MODE：AUTO/TIMED/ALARM/MANUAL
"SYSTEM ": Press 【ENTER】key to select PAL or NTSC
"RECORD MODE": AUTO / Timed / Manual, press 【ENTER】to select.
"RESOLUTIONS": Press the【ENTER】to select D1, HD1 or CIF. Please note 4 channels will be set
Synchronously, e.g. if you set “CIF”, the CIF resolution will apply to all channels;
However if you set the resolution as D1, this setting will apply to ch1 and ch2+ CIF
will apply to ch3 and ch4. The resolution doesn‟t relate with the below “Channel”
“Quality” “Frame Rate””Record” directly.
"AUDIO ": Audio recording On / Off switch, press the【ENTER】to select.
"AUDIO INPUT": LINE IN / MIC, press the【ENTER】to select.
"TIME SLICE": There are 4 types of time period for continued recording, they are 15/30/45 and 60
minutes. Press the【ENTER】key to modify this setting.
"CHANNEL", "QUALITY", "FRAME RATE", "RECORD": Those four keys are for the configuration of
every single channel, press the【ENTER】key to set up.
"OVERWRITTEN": Overwritten on/off switch. Press the【ENTER】key to select.
"ALARM DELAY ": Set alarm delay between 30 seconds ~ 1800 seconds, press digit keys to setup
"GOP": I-frame inteGSal. Press digit keys to set
“BITRATE”: Press digit keys to select.
"TIME LIST": 2 time periods can be set for a day; the DVR will automatically make video records according to
the setting. This function is available only with the timed recording mode. Press the【ENTER】key to enter

User Manual for Mobile DVR
13
below setting interface.
TIME LIST
TIME LIST
DATE TIME 1 TIME 2
EVERYDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
00:00-00:00
SAVE
Note: System will auto start recording within the period in “Timed”setup.
Sub-streaming set：
Cursor move to “Sub-streaming”and press【ENTER】key enter to the following interface，
SUB
SUB- -STREAM SET STREAM SET
RESOLUTION
RESOLUTION： ：CIF/QCIF CIF/QCIF
QUALITY
QUALITY： ：Medium/High/Low Medium/High/Low
SITS RATE: 24/32/40/48/56/64/72/80/96/120/136/172/210
SITS RATE: 24/32/40/48/56/64/72/80/96/120/136/172/210
FRAME RATE: 01/01/01/02/02/03/04/05/07/10/13/15/20
FRAME RATE: 01/01/01/02/02/03/04/05/07/10/13/15/20
SAVE
"Resolution": The default is CIF.
"Bit Rate": 16/24/32/40/48/56/64/72/80/96/128/160/200 bits.
Default is 96 bit, press 【ENTER】key to enter
"Frame Rate": 01/01/01/02/02/03/04/05/07/10/13/15/20 frame
Default is 10f, press【ENTER】key to enter.

User Manual for Mobile DVR
14
Click ‟SAVE‟ to save the configuration.
4.4.3. Power Management
POWER SETUP
POWER SETUP
POWER MODE：TIME /ACC
DELAY POWER OFF：ON/OFF
POWER ON TIME：HH:MM:SS
POWER OFF TIME：HH:MM:SS
SAVE
DELAY TIME：5（MIN）
"Power mode": start up and shut down mode by pressing 【ENTER】key to select.
TIME: DVR will auto power on/off according to the preset time table.
ACC: System will auto power on/off according to vehicle acc switch on/off signal.
"DELAY POWER OFF": When this function is on, the DVR will continue making record for a while as per the
configuration. When this function is off, the DVR will shut down whenACC is off. Press „enter‟key to select.
“TIME”: off---Shut down system at once. Press 【ENTER】key to select.
"DELAY TIME": Press digit keys to select. The range is between 3 and 300mins.
"POWER ON TIME": Press digit keys to select.
"POWER OFF TIME": Press digit keys to select.

User Manual for Mobile DVR
15
4.4.4. Alarm Settings
ALARM SETUP
ALARM SETUP
INPUT ENABLE RECORDPWL
ON
ON
ON
OFF
ALARM
LEFT
RIGHT
BRAKE
HIGH
HIGH
LOW
LOW
ON
OFF
ON
OFF
RELAY OUTPUT
OUTPUT
OFF
ENABLE PWL
LOW
SAVEGSENSORMOVE DETECT SPEED
I/05(ALARM)
I/06(ALARM)
OFF
OFF
HIGH
LOW
ON
OFF
Alarm input
Support 6ch alarm input.
"ENABLE": switch on/off.
ON---Enable alarm input;
OFF---Disable alarm input. Press the 【ENTER】key to select on or off to enable or disable
alarm input.
"Level Setting ": Setup input alarm level signal. HIGH---high electrical level input signal will enable alarm.
Press „enter‟to set the level. High or low level can be set with input signal; open or close can be set with output
signal.
"RECORD": ON---Enable alarm recording; OFF---Disable alarm recording. Press the【ENTER】to select on or
off to enable or disable recording.
Alarm output
Support 1ch alarm outputs.
“ENABLE”: On/Off switch.
ON---Enable alarm output;
OFF---Disable alarm output. Press the 【ENTER】key to select.
PWL: power level output for alarm. High stands for high power level output and low refers to low power level
output. Select and press “SAVE” to save all setup.
●MOVE SET (Motion Detection)

User Manual for Mobile DVR
16
MOVE SET
SAVE
OFF/ON
OFF/ON
HIGH/MID/LOW
HIGH/MID/LOWCHI/CH2/CH3/CH4
CHI/CH2/CH3/CH4
ENABLE
ENABLE
LEVEL
LEVEL
CHANNEL
CHANNEL
AREA SET
AREA SET
Channel Number：CH1/CH2/CH3/CH4，press【ENTER】key input
Level: HIGH/MID/LOW. Press【ENTER】input
ENABLE: ON/OFF. Press【ENTER】input
ENABLE ON: start alarm record and records alarm journal when alarm
ENABLE OFF: Don‟t start alarm record and don‟t records alarm journal when alarm
AREA SET: Press【ENTER】key to setup
Remark:After complete setup, please press “SAVE”to save all settings
●OVER SPEED
Move cursor to “over speed”and press【ENTER】key to enter to over speed alarm interface as below:
OVER SPEED
OVER SPEED
THRESHOLD：60（0~60）KM/H
ENABLE
ENABLE： ：ON/OFF ON/OFF
SAVE

User Manual for Mobile DVR
17
THRESHOLD：0~60km/h
ENABLE: Press【ENTER】key to set-up
ENABLE ON: To start alarm record and records alarm journal when GPS speed overran threshold
ENABLE OFF: Never to start alarm record and records alarm journal when GPS speed overran threshold
Remark: After complete setup, please press “SAVE”to save all settings
G SENSOR
GSENSOR setup, Press the 【ENTER】key to enter below setting interface for G-sensor configuration:
GSENSOR
GSENSOR
THRESHOLD VALUES:
X: 2.00g
Y: 2.00g
Z: 2.00g
ALARM SWITCH: ON/OFF
ADJUST
STATUS: X= -0.00 Y= -0.00 Z= -0.00
SAVE
“LIMIT”: Limit value for X/Y/Z, Minimum value is 0.00g and Maximum value is 9.99g, press digit keys to
setup.
“ALARM”: G-Sensor alarm OPEN/CLOSE setup, press 【ENTER】to set it.
Alarm Open: Open alarm recording and alarm files will be recorded when X/Y/Z value over than “Limit
value”under record statues
Alarm Close: Close alarm recording and alarm files will not be recorded when X/Y/Z value over than
“Limit value”under record statues
“CHECK”: Adjust X/Y/Z current values when user start up device at first time, Press the【ENTER】key to
confirm. After “CHECK”, X/Y/Z value will be “0”
Remark: Please do remember to click “SAVE” to save data after setting.

User Manual for Mobile DVR
18
4.4.5. Security Settings
SECURITY
SECURITY
PASSWORD：ON/OFF
USER PWD：******
CONF PWD: ******
INPUT NOT SAME！
ADMIN PWD：******
CONFIRM : ******
SAVE
NOTICE：PASSWORD IS 6 DIGITAL！
Password setting:
"PASSWORD": ON---Enable password; OFF---Disable password, press the【ENTER】key to select.
Select and press “SAVE” to save the configuration.
4.4.6. Network Settings:
Network parameters should be set on the device. The system will detect devices without any further setting if
the configuration is correct
.
NETWORK SETUP
NETWORK SETUP
IP ADDRESS: 192. 168. 000. 192
LOCAL NETWORK
NETMASK：255. 255. 255. 000
GATE WAY: 192. 168. 000. 001
MAC：00.44.53.75.55.56
SERVER IP：192 . 168 . 001 . 000
SERVER SET
CONTROL PORT：5678
MEDIA PORT：5678
SAVE WIFIDDNS3G
TYPE：IP/DOMAIN
DOMAIN：www.123.cn
“Local Network”
LAN CONNECT: Set up IP address, net mask, gateway, MAC address etc. and please set the seGSer IP in same

User Manual for Mobile DVR
19
with net mask‟s, Please make a reference on the above picture
WAN CONNECT: No need set up network on PC
“CENTER SET”
LAN CONNECT: SeGSer IP must keep same with device‟s and the port number is “5678”
WAN CONNECT:
“SEGSER IP”: Set up WAN IP
“PORT NUMBER”: If user get online via router, make a port mapping is necessary, the port number is “5678”
“DOMAIN”：If user use dynamics IP, user can apply a DDNS account and then to set up DOMAIN ( for
example: www.123.cn)
3G wireless settings
Press 【ENTER】key to enter the following interface:
3G FN：ON / OFF
3G SETUP
3G SETUP
TYPE：WCDMA / EVDO / TD
APN：ctnet
CENTER NO：*99#
USER NAME：card
PASSWORD：****
SAVE
LINK MODE：NORMAL
/TRIGGER
TRIGGER NO.1：
TRIGGER NO.2：
VOICE FN：OFF/ON CALL NO.1：
CALL NO.2：
“WIRLESS”: ON—enable wireless; OFF—Disable wireless, press the【ENTER】key to select.
“TYPE”: WCDMA—WCDMA module; EVDO—EVDO module, TD-TD module press the【ENTER】key to
select.
“APN”: APN CMWAP, Press the【Enter】key to enable the keyboard window, then use left/right/up/down/
enter key to setup.
“CENTER NUM”: Center number, Press the【Enter】key to pop out keyboard window, then use
left/right/up/down/ enter key to setup.
“USER NAME”: Press the【Enter】key to pop up keyboard window, then use left/right/up/down/ enter key to
setup.
“PASSWORD”: Press the【Enter】key to pop up keyboard window, then use left/right/up/down/ enter key to
setup.
Click “SAVE” to save all setup.
●DDNS
"DDNS": Cursor to the " DDNS ", Press the【ENTER】key to enter below interface.

User Manual for Mobile DVR
20
DDNS：ON / OFF
DDNS
DDNS
USERNAME：
PASSWORD：
SAVE
TYPE：DYNDNS / 3322
DOMIAN：
DDNS: Close / Open, with 【Enter】key to select.
“TYPE”：DYNDNS/3322，with 【Enter】key to select.
"User Name", "Password": user name and password for setting DDNS, press 【Enter】key to enter, then enter
to the keyboard interface, move the cursor and input corresponding letter through press 【Enter】key.
“DOMAIN”: With press 【Enter】key to input matched domain and enter to key interface, choose the correct
letters by moving cursor and then press 【Enter】to input them
Click the “SAVE”after complete setup
WIFI SET
Move cursor to “WIFI”and then press【ENTER】to enter to the following interface
WIFI SET
WIFI SET
WIFI
WIFI： ：ON / OFF ON / OFF
ENCRYPT
ENCRYPT： ：ON / OFF ON / OFF
TYPE
TYPE： ：WEP WEP
IP
IP： ：192.168.000.192 192.168.000.192
GATEWAY
GATEWAY： ：192.168.000.001 192.168.000.001
SUBMASK
SUBMASK： ：255.255.255.000 255.255.255.000
SSID:
SSID:
PASSWORD
PASSWORD： ：
SAVE
WIFI：Choose ON or OFF with【Enter】key
ENCRYP: Choose ON or OFF with【Enter】key
ENCRYTP TYPE：Choose the type NONE/SHARED/WPAPSK/WPA2PSK/WPANON with【Enter】key