Gladiator Joe GJ0A0111 User manual

Gladiator Joe Inc. GJ0A0111
1
VESA MOUNT ADAPTER
GJ0A0111
GLADIATOR JOE
Fit the following models:
HP Pavilion 23.8” FHD IPS All-in-One

GJ0A0111 Gladiator Joe Inc.
2
WARNING!
• To avoid danger of suocation, keep these parts
away from babies and children.
• Be aware of the sharp edges of the product.
• Check carefully to make sure that there are no
missing of defective parts. Improper installation
may cause problem.
• Do not hang something heavy on this product,
which may exceed the weight capacity.
• Do not use this product for any other purpose that
is not specied in this manual.
PACKAGE CONTENTS
A (x1)
Adapter Bracket
B (x4)
M4 Panhead Screw
C (x1)
M2.5 L-Key

Gladiator Joe Inc. GJ0A0111
3
ASSEMBLY STEPS
Step 1
Remove original stand with C
(x1)
Install Adapter A to the com-
puter original connector
Step 4
Mount adapter to your
arm with B(x4)
Step 3
Slowly tilte adapter
until its horizental to the
monitor back
Step 2
Install original stand
screws with C (x1)to the
stand as shown in the
picture
B
A
Original
stand crews

GJ0A0111 Gladiator Joe Inc.
4
Please feel free to contact us
if you have any question.
US: [phone]
CDN & International:
[phone]
[e-mail]
https://gladiatorjoe.com