Glass Expansion D-Torch User manual

D-Torch with Quartz Outer Tube for ELAN
30-807-0540
Glass Expansion
©
INS-0050 Page 1 of 2
Version 1.3
BEFORE YOU START
Congratulations on t e purc ase of your D-Torc .
For your reference, t e D-Torc is made up of t ree components; t ese can be ordered separately, refer Table 1
D-torc is supplied wit a pair of gloves; always wear clean gloves w en andling ICP Torc es and t eir components.
Item No. Part Number Description Qty
1 31-808-2847 Base and Inner Tube 1
2 31-808-2848 Quartz Outer Tube 1
3 31-808-2818 Retainer 1
4 SAFEGLOVE-MED Safety Gloves 1 Pair
Scope
1. Precautions for personal safety and Torc preservation
2. How to remove Outer Tube from Torc
3. How to re-attac Outer Tube to Torc
Specia too s, requirements, etc
 Safety glasses
 Safety gloves (Item 4 supplied)
 Basic competence in making connections to ICP
1. Precautions for persona safety and Torch preservation
 Always wear safety gloves and glasses w en removing (or replacing) ICP Torc es
 T e Torc is made from ig grade engineered materials – Handle wit extreme care
 Do not allow t e Torc to be placed on ard surfaces or allow it to come into contact wit ard objects
Note! It is recommend you review and understand t is procedure before andling t e Torc assembly
Item 4
Item 2
Item 1
Item 3

D-Torch with Quartz Outer Tube for ELAN
30-807-0540
Glass Expansion
©
INS-0050 Page 2 of 2
Version 1.3
2. How to remove Outer Tube
T e Torc outer tube is accurately located in place wit t e retainer. T e outer tube can be removed at any time by
completing t e following steps.
Note! A tapered ferrule is permanently fixed to t e to t e outer tube – Do not attempt to remove t e ferrule from t e tube.
3. How to re-attach Outer Tube
To replace t e outer Tube, complete t e following steps.
Note! If you have any questions regarding the Torch assembly or this procedure, please contact
Glass Expansion.
Step 2.1.
If fitted, remove Torc assembly from ICP. (Not S own)
Step 2.2. Unscrew Retainer ½ turn
Step 2.3. Grip Outer Tube firmly (as s own) and pull away from Torc Body – You will ear a “click” as t e outer tube releases
Hint: It will elp w ilst pulling on t e outer tube to rock it slig tly from side to side – Do not rotate t e Tube.
Step 2.4. Fully unscrew t e Retainer t en carefully wit draw t e Outer Tube from t e Torc Body
Base / Inner Tube
Outer Tube &
Retainer
Step 2.2. Step 2.3. Step 2.4.
(Note! P otos s ow quartz type Outer Tube)
Step 3.1.
C eck t at bot locating surfaces (Outer Tube and Torc body) are clean and free of damage.
Step 3.2. Carefully slide t e Outer Tube over t e Inner Tube – T e Outer Tube will self locate into t e Torc body.
Step 3.3. Tig ten t e Retainer to fix t e Outer Tube in place (Moderate pressure by and is adequate).
Step 3.4. If desired, return Torc assembly to ICP and connect as normal. (Not S own)
Step 3.1. Step 3.2. Step 3.3.
(Note! P otos s ow ceramic type Outer Tube)