Glass Expansion 70-803-1923 User manual

Instruction Manual for
Magnifier Inspection Tool
70-803-1923
INS-0547

Before you Start
Congratulations on your purchase of your new Magnier Inspection Tool.
Please check to ensure your package contains the following items:
1
2
Magnier Inspection Tool
Hook Tool
1

Turning on the LED
Hold the loupe and rotate the focus
knob in counter-clockwise direction to
open the battery compartment.
Hold the loupe and close it by
rotating the focus knob in a
clockwise direction.
Pull the plastic lm from the button
batteries in the battery compartment
to remove it.
Turn on/off the LED by simply
switching it on or off.
Battery
compartment
Focus
1
3 4
2
Rotate
clockwise
to close
LED switch
on/off
2

Changing the Batteries
Changing the Scale
First, Open the battery compartment.
Use the small metal tool (hook) that
is included in the set to easily remove
the old AG9 button batteries.
This meter has a detachable reticle glass scale, if you want to remove and
change it just simply rotate the detachable scale on the meter.
Insert four new AG9 button batteries
in the battery compartment. Make
sure to insert the batteries in correct
polarity position. Close the loupe
after.
1
1
2
2
Positive (+)
Detachable
scale
3

International
6 Central Boulevard, Port Melbourne,
VIC 3207, Australia
Telephone: [phone]
Email: [email protected]
For more information please visit www.geicp.com or contact one of our
ofces below.
Americas
31 Jonathan Bourne Drive, Unit 7
Pocasset, MA 02559, USA
Telephone: [phone]
Email: [email protected]
Europe
Friedenbachstrasse 9, 35781 Weilburg,
Germany
Telephone: [phone]
Email: [email protected]