GlassOuse GS04 User manual

GS04 - FOOT SWITCH USER MANUAL
WARNINGS
While removing your Foot Switch from your
GlassOuse or other devices, pay attention
not to damage the wire joining points on the
3.5mm jack connector and do not pull the
cable harshly.
7th Floor, Huarong Building, Qiaolian East, Bulong Road,
Longgang District, 518129, Shenzhen, Guangdong, China
P. 0086-755-8920-5835 F. 0086-755-8980-5835-812
[email protected] | www.glassouse.com | www.ennopro.com
FOOT SWITCH
Even though Foot Switch is genuinely designed for
GlassOuse V1.2, you can connect it to any kind of
adapted device offering a mono 3.5mm jack connector
plug in for external switch controls and it works with
short circuit low signals. A simple yet highly functional
equivalent to a regular input mouse which is designed
to be used with your foot, Foot Switch is capable to
detect different volumes of pressure.
Made of durable and solid materials, its long cable
allows you to adjust the switch position according to
your needs. With its non-skid bottom, Foot Switch
mounts tightly on surfaces to prevent moving around
while pressing on the switch. You can use simply press
on it to do the clicking actions via both semi-hard and
hard pressures.

USER MANUAL
7th Floor, Huarong Building, Qiaolian East, Bulong Road,
Longgang District, 518129, Shenzhen, Guangdong, China
P. 0086-755-8920-5835 F. 0086-755-8980-5835-812
[email protected] | www.glassouse.com | www.ennopro.com
SWITCH CONNECTION
1. Plug Foot Switch to Glassouse V1.2 or any 3.5mm jack adapted device via mono 3.5mm jack connector.
2. Place foot Switch on a flat surface and adjust the position until you feel comfortable enough to do the
pressing action.
GS04 - FOOT SWITCH
Length: 102.5mm x Width: 37mm x Thickness: 31.2mm
Weight: 300g
Cable Length: 192cm
Activation Force: 2.5 Kg
DEVICE
3.5MM JACK
SWITCH AREA
CABLE