Global Fire Equipment ZEOS-AD User manual

ZEOS-AD
Analogue Addressable Fire Detector
ma_zeosad_01_010001_en_180420
TECHNICAL SPECIFICATIONS
ORDER CODE DESCRIPTION
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL
Tel: [phone] • Sales: [email protected] • Technical Support: [email protected] • www.globalfire.pt
Loop Powered - 17 V to 30 V DC
450 uA max.
4 mA - Alarm LED Iluminated
According to EN54-5 and EN54-7
0.5-2.5 mm²
20 seconds max.
White / ABS / 95% RH Non-Condensing
0°C to 50°C / -10°C to 85°C
100 mm (D) x 50 mm (H) inc. base / 144 g inc. base
SUPPLY VOLTAGE
CURRENT - QUIESCENT / SURGE
CURRENT - DEVICE IN ALARM
SENSITIVITY
CABLE SIZE
RESET/START-UP TIMES
COLOUR / CASE MATERIAL / MAX. HUMIDITY
NORMAL / TRANSIENT OPER. TEMPERATURE
DIMENSIONS / WEIGHT
ZEOS-AD-S
ZEOS-AD-H
ZEOS-AD-SH
ZEOS-AD-SI
ZEOS-AD-HI
ZEOS-AD-SHI
| CERTIFICATE | ANALOGUE ADDRESSABLE PHOTOELECTRIC SMOKE DETECTOR
ANALOGUE ADDRESSABLE TEMPERATURE/HEAT DETECTOR
ANALOGUE ADDR. COMBINED SMOKE & HEAT DETECTOR
ANALOGUE ADDRESSABLE PHOTOELECTRIC SMOKE DETECTOR WITH ISOLATOR
ANALOGUE ADDRESSABLE TEMPERATURE/HEAT DETECTOR WITH ISOLATOR
ANALOGUE ADDR. COMBINED SMOKE & HEAT DETECTOR WITH ISOLATOR
1328-CPR-0521
1328-CPR-0520
1328-CPR-0519
1328-CPR-0607
1328-CPR-0610
1328-CPR-0492 INSTALLATION
INSTALLINGTHEBASE-Toensureproperfitofthedetectorheadtothebase,allwiresshouldbeproperlydressedatinstallationbypositioningallwiresflatagainstterminalsand
fasteningthewiresawayfromconnectorterminals.Thedetectorbasecanbemounteddirectlyontomoststandardelectricaljunctionboxes.
INSTALLINGTHEHEAD-Aligndetectorcomponentsusingprovidedalignmentmarksonboththeheadandbase.Aligndetectormarkandshortalignmentmarkonbase.Fitthe
detectorheadontothe baseand twist clockwise tosecureit. After alldetectors areinstalled, applypowertothecontrolunitandactivate the detectionloop.Testthe detectors
asdescribedbelow.
TESTING-Allremotesignallingsystems,releasingdevicesandextinguishingsystemsshouldbedisconnectedduringthetestperiodandreconnectedattheconclusionoftesting.
SMOKE:Allowsmokefroma cottonwickortestsmokeaerosoltoenterthedetector’ssmoke chamberforatleast10seconds.Whensufficientsmokehasentered,thedetector
willsignal an alarm. This will beindicated by theillumination of the2 Red LEDs provided.Make suretoclearsmoke outof thechamber before resetting in orderto keep the
detectoratitscurrentsensitivitysetting.
HEAT:Thedetectortobetestedshouldbesubjecttoaflowofwarmairatatemperatureofbetween65°Cand80°C.Thisrequirementcanbemetbysomedomestichairdryers.
Switch onthewarmairflow andcheckthat thetemperature iscorrectandstable.From adistanceofseveralcms,directtheairflowattheguard protectingthethermistor.The
detector should alarm within 60 seconds. Uponalarm immediatelyremovethe heat source and checkthat theRed LEDsof thedetectorare illuminated. If a detectorfails to
activatewithin60seconds,confirmconnections andprogramming.Ifnecessaryreplace unit.Note:Aftertesting,check thatthesystem is returnedtonormaloperation. Notify
theappropriateauthoritiesthatthetestingprocedurehasbeencompletedandthesystemisactiveagain.
MAINTENANCE - The recommended minimum requirement for detector maintenance consists of annual cleaning of dust from the detector head using a low power
vacuumcleaner. >>DONOTATTEMPTTODISASSEMBLETHEDETECTOR
DETECTOR BASE - LOOP CONNECTIONS
NOTE: Positive terminal of remote indicator should be connected to terminal 4 (+ Loop IN/ OUT)
Connection applicable only to:
ZEOS-AD-S / ZEOS-AD-H / ZEOS-AD-SH
Connection applicable only to:
ZEOS-AD-SI / ZEOS-AD-HI / ZEOS-AD-SHI
-Loop IN/ OUT - REMOTE LED INDICATOR
+Loop IN/ OUT
-Loop IN/ OUT
SCREEN
To next device
in loop or return
to panel
-Loop IN/ OUT
MADE IN PORTUGAL - EU

ADDRESS SETTINGS
BASE LOCK
MORE INFO >> WWW.GLOBALFIRE.PT
To lock beacon remove pin
available at terminal 4 on the
underside of the beacon using
a small screwdriver.
To unlock beacon from its base
push provided unlock key
through hole available on the
base side wall as shown.
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
01 02 03 04 05 06 07 08
1234 5 6 7 8 1234 5 6 7 8
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
09 10 11 12 13 14 15 16
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
17 18 19 20 21 22 23 24
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
25 26 27 28 29 30 31 32
1234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8
33 34 35 36 37 38 39 40
1234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8
41 42 43 44 45 46 47 48
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
49 50 51 52 53 54 55 1234 5 6 7 8 56
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
57 58 59 60 61 62 63 1234 5 6 7 8 64
1234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8
65 66 67 68 69 70 71 72
1234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8 1 234 5 6 7 8
73 74 75 76 77 78 79 80
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
81 82 83 84 85 86 87 88
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
89 90 91 92 93 94 95 96
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
97 98 99 100 101 102 103 104
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
105 106 107 108 109 110 111 112
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
113 114 115 116 117 118 119 120
1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8 1234 5 6 7 8
121 122 123 124 125
1 2 3456 7 8
Address
4 ON =8
5 ON =16
6 ON =32
7 ON = 64
Address Switches binary weights
Switches 1-7
used to configure the module’s address
Switch 8
not used
1 2 345678
ON OFF ON
OFF
D.I.L. SWITCHES CONFIGURATION
1 ON =1
2 ON =2
3 ON =4
MECHANICAL SPECIFICATION
Detector Head
Detector Base
Alignment Marks