Global Industrial 812548 User manual
1
Single Docking Station
101123
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
WARNING
•After use, please turn off the machine in time.
•Please charge by the supplied power cord.
•When the product accidentally drops into the water while
using, please unplug the input socket and place it in a
safe and open area. The product shall not be turned on.
•While using or delivering the product, its screen should
be carefully protected from strike.
•When the product is on, it is forbidden to touch pins in
the battery compartment with hands or metal devices.
Model:812548
b82045fc-0b136962-90871f19-f891407c
TM
TM
Read this manual thoroughly prior to installation, operation or maintenance. Keep these instructions in a safe
location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-
1-800-645-2982.
•
Failure to follow installation instructions will void warranty.
•When plugging in or pulling out the battery, please be
cautious about the operation to avoid pins damage;
•The product should be kept away from fire, high-
temperature environments, and humid and rainy
environments during use and storage, otherwise it may
lead to dangerous situations.
•Non-professionals should not disassemble it by
themselves.
•Do not discard the product at the end of its service life.
Recycle the product according to local laws and
regulations.
•This product should be protected from rain, water
immersion, moisture, and violent vibration during
transportation.
•It cannot be used at an altitude exceeding 2000m.
•Do not drop, squeeze, or collide with the product, so as
not to subject the product to external pressure, which may
cause a short circuit of the internal circuit of the product
and damage to the battery.
User's Manual
2
b82045fc-0b136962-90871f19-f891407c
Package Contents:
Single Docking Station 812548
•Single Docking Station * 1
•Product Instruction Manual * 1
Technical parameters
Item Parameter
Output Power 500W
Peak Power 1000W
Overload Protection 580W 30S
Adaptive Battery LiFePO4 8S 20/25AH
Product Size
Product N.W. 9.19 lbs
Product G.W. 12.25 lbs
Working Environment
Transport and Storage
Environment
Other Function When the battery level is≤16%, the buzzer rings three
times at 1-minute interval and the screen will flash
along with the alarm; When the battery level is ≤ 6%,
the buzzer rings constantly. When the battery level is＜
5%, the output will cut off. When the output load is≥
500WZ, the screen will pop up the overload icon.
Output Voltage 110V 60Hz
10.23 x 10.55 x 10.47 inch（L*W*H）
14-104°F
Relative Humidity≤80%
Altitude≤2000M
Temperature: 5-131 °F
Relative Humidity≤93%（no condensation）
Atmosphere Pressure:70kPa～106kPa
3
User's Manual
b82045fc-0b136962-90871f19-f891407c
Front of Docking Station
Rear of Docking Station
Application and Function Instruction:
The single docking station is with internal 500W pure sine wave inverter. Insert the battery into the
plastic station and turn the power on. The inverter output is AC 110V 60Hz, being able to power
products ≤ 500W. The product is equipped with functions like overload protection, short circuit
protection, low battery level prompt and low battery over-discharge protection. It has a 1.7-inch
LCD screen, displaying the current battery level and overload icon.
Product Main Structure Composition
The docking station is mainly composed of a sheet-metal base, battery plastic base, inverter, control
panel and LCD screen.
Single Docking Station 812548
Screen
Power Button
American Standard Three-
pin Socket
User's Manual
b82045fc-0b136962-90871f19-f891407c
Product Maintenance
Issue: No Response When Power on
•Confirm whether the battery is completely inserted into the battery compartment and the
sockets in the bottom of the battery should be completely connected to the battery station
pins.
•Check whether the battery station pins are deformed or falling off.
•Make sure whether the battery is fully charged.
Operation and Usage
1. Check whether there is any visible damage to the appearance of the product and whether the
output socket or the battery pins are loose or damaged (If abnormal conditions occur, stop
using).
2. Confirm that whether the power of loaded device is within the specified range of the dual
docking station. Then plug the device into the AC socket on the back of the product.
3. Plug the battery into the plastic battery compartment in the product.
4. Turn on the power switch. Then the device starts and the internal inverter works. The load
should work normally. When the screen works normally, it shows that the corresponding
battery is working.
5. When the product alarms a low-battery prompt, it should be turned off immediately and the
battery needs to be replaced by a new one.
Troubleshooting
4
1. Socket contacts in the battery compartment are fragile so they should be inspected regularly.
The deformed or cracked one should be replaced. Otherwise, it may cause charging failure.
2. Regularly remove dust and dirt from the heat dissipation window.
3. Regularly check whether the external screws and lifting rings of the chassis are fully tightened;
Suggested Action:
Single Docking Station 812548
