Global Industrial WB800511 User manual

1MODEL # 800511
User's manual
Manual del usuario
Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
Models: 800511
Global Industrial Receiving Cart
Step 1 Step 2
Step 3 Step 4
Take base of unit
and turn upside
down. Place on
soft surface to
avoid scratching
Using (16) M6x16 screws
with washers and lock
washers, secure the four
corners of each caster wheel
to the base. Place the two
swivel casters on the front
of the unit and the two rigid
casters in the back.
NOTE: During assembly, do
not fully tighten bolts until
all components are aligned
Flip the base so
it's resting on
the casters. Lock
the two front
wheels for ease of
assembly.
Using (8) of the
M6x35 bolts and
M6 nuts, secure
the U pieces to
the base. Secure
the pieces without
the panelling to
the back with
the rigid casters
and secure the
U pieces with
panelling to the
front.
Secure the back panel
to the U pieces with
paneling. Use (8) M6x10
bolts and the holes on the
edge of the back panel.
Do not use the holes that
are a part of the grid.
Take top of unit and
turn upside down.
Place on soft surface
to avoid scratching
Using (2) M8x40 bolts,
secure the handle to
the top piece.

2
Receiving Cart User Manual
Step 5 Step 6
Step 7 Step 8
Using (8) M6x35
bolts and M6
bolts, secure the
(2) outside shelves
to the U pieces
without panelling.
Using (8) M6x10
bolts and M6
nuts, secure the
inside shelves
to the inside of
the cabinets.
These shelves
can be placed at
whatever height is
required.
Using the J-Shaped pin, pull
down on the pin and put each
door into place so that the pin
lines up with the holes in the
top and bottom. Once in place,
release the pins and ensure they
go into the holes. Make sure the
doors are secured tight.
Tighten all the screws and unlock the wheels for
use. Assembly is complete.
Using (6) M6x35
bolts and M6 nuts,
secure the top
right-side up to the
U pieces.
At the front
corners, use (2)
M6x10 bolts and
M6 nuts to secure
the top.

3
Receiving Cart
• DO NOT USE THIS CART AS A STEP LADDER. DO NOT CLIMB, LEAN, OR
STAND ON CART SHELVES OR TOP
• DO NOT USE CART UNLESS ALL BOLTS AND SCREWS ARE TIGHTENED.
EVERY SIX MONTHS, CHECK ALL BOLTS AND SCREWS ARE TIGHT AND
TIGHTEN IF NECESSARY
• IF ANY PARTS ARE MISSING, DAMAGED, OR WORN, STOP USING THIS CART
UNTIL REPAIRS HAVE BEEN MADE USING FACTORY AUTHORIZED PARTS
• KEEP CHILDREN AWAY FROM CART. DO NOT LET CHILDREN PLAY WITH OR
RIDE ON CART.
• DO NOT CLIMB UNDER OR THROUGH CART
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY
WARNINGS
CAPACITY INFORMATION:
Each Shelf on the Receiving Cart is rated for 500lbs capacity.
DO NOT OVERLOAD
User Manual