Global Industrial 412659 User manual

1MODEL # 412659, 412660, 412661, 412662
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
SCALE FEATURES
Model no. 412659 412660 412661 412662
Capacity 75 lb 165 lb 330 lb 440 lb
Division 0.02 lb 0.05 lb 0.1 lb 0.1 lb
Platform Size 11-13/16" x 11-13/16"
Battery
operated 4×AA batteries
Battery saving auto shut o (2 minutes)
Luminescent backlight display (or turned o for battery saving)
KEYPAD FUNCTIONS
KD-SHIP
KD-BEC
KD-PS
• : Power Switch
• : Change the weight unit between lbs. and kg.
• : Turn o/on the backlight
• : Press "TARE" to reset scale to zero.
When the weight on the tray is below 5% of the maximum
capacity of the scale, pressing this key will reset the scale to
zero mode. This key is also used as a TARE function when the
weight on the tray is above 5%. The tare indicator will appear
and the display will show zero.
• : Place the item on the scale platform. Press the
"HOLD" key,theweightwillremainonthedisplayaftertheitem
has been removed from the scale so the weight can easily be
read without any interference. Press the zero key to cancel the
held reading and return the scale to reading zero.You may also
press Hold key to exit Hold function.
DISPLAY WINDOW
: Scale is in ZERO mode
: Scale is in the TARE mode
or “Lo” : Battery is at low voltage
OPERATING INSTRUCTIONS
1. Place scale on a at, stable surface.
2. Press the button on the display (-88888).
3. Wait for the display to show“0”,This may take several
seconds.
4. Use the button on the display to change the
reading from lbs or kgs.
5. Place the item to be weighed in the center of the stainless
steel top. Items must have a weight of 1.1 lb. or more to
register.
6. Weight of item will be displayed.
7. Remove item from scale.
Models: 412659, 412660, 412661, 412662
DIGITAL COMPACT BENCH SCALE

2
DIGITAL COMPACT BENCH SCALE
CALIBRATION
IMPORTANT: This scale was professionally factory calibrated before shipment. It usually does NOT need to be recalibrated before use.
However frequent users may want to calibrate the scale periodically to maintain perfect accuracy. Incorrect calibration can occur if you
do not follow the steps exactly. You will need an accurate calibration weight to calibrate this scale.
1. Place the scale on a at, very stable surface and turn the scale on.
2. Press and hold for 2 seconds, wait for the display to show“CAL”, and then the required calibration weight will show on
the LCD(ie 50.00).
3. Place the required calibration weight on the tray, wait 2 seconds, then Calibration is complete when“PASS” is displayed.
NOTE: If your scale does not read accurately, this indicates calibration error & the calibration process should be repeated more slowly.
Please calibrate on a very stable at surface!
FUNCTION SETTINGS
1. Enter function setting mode.
From the o setting, press & hold the [TARE] button, then press the [ON/OFF] button, release both keys. The display will show
“-88888”. Then the display will show A ON = Auto o enabled / A OFF = Auto o disabled.
2. To Enable or Disable the Auto-o.
When the display show A ON / A OFF. Press [TARE] to toggle between the auto o settings.
3. To Enable or Disable the Backlight.(Only for KD-PS)
Press [UNIT] to enter backlight setting mode. Now the display will show B ON = Backlight enabled/ B OFF = Backlight disabled.
Then press [TARE] to toggle between backlight on and o.
4. Conrm the Setting
Press [ON/OFF] to turn the scale o and on again. Now function setting is nished.
INACCURACY/ERROR
Theprimaryreasonsforinaccuracyormalfunctionsarelowbatteries,incorrectcalibration,overloadoroperationonanunstablesurface.
This scale is a precise instrument and must be handled with the utmost care.
IMPORTANT SAFEGUARDS
IT IS IMPORTANT TO READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFEGUARDS PRIOR TO USE.
• Save these instructions for future reference.
• The scale must be kept stable for accurate weighing.
• Do not drop, shock or overload the scale.
• Placeitemstobeweighedontothescalewithcare.Althoughthescaleisdesignedtobedurable,roughtreatmentmaypermanently
damage the internal sensor.
• Items should be placed on the center of the scale when being weighed.
• Scale should be kept free of dust, dirt, moisture, vibration and not in close proximity to other electronic equipment. Any or all of
these may cause an adverse eect on the reliability and accuracy of the scale.
• If “EEEE” appears on the display, then the item’s weight has exceeded the maximum capacity of the scale. Remove item
immediately. Scale can be permanently damaged by overloading.
• Store scale in a cool dry place. Do not expose the scale to moisture.
• Avoid lengthy exposure to extreme heat or cold.
• Do not allow items to sit on scale platform for and extended amount of time. Doing so may have an adverse eect on the longevity
and accuracy of the scale.
• Failure to follow these directions/precautions may result in damage to your scale and may void warranty.
User Manual