Global 262077BL User manual

MetalMeshBenchwithBack
Assembly
Instructions
Customer Service
1-800-645-2986
These assembly instructions and warnings should be retained by maintenance or safety
department for future reference. Routine maintenance and inspection of the equipment
should be performed every six months. Damaged and worn parts should be removed from
service until replaced or repaired to prevent safety hazards.
WARNING
• Assembly and installation of
equipment should be performed
by 2 people.
• Workers should use OSHA
approved safety and lifting
equipment.
WARNING
• Do not climb on, under or
through tables and benches.
• Two people required to move
tables and benches.
• Do not use if any parts of bench
or table are broken or damaged.
• Inspect and tighten hardware
every six months.
• Replace rusted hardware and
damaged components.
WARNING
• This product contains chemicals
which are known by the state of
California to cause cancer, birth
defects or other reproductive harm.
Model No. 277155 BL/BK/GN
ExpandedMetalSteelBenchWithBack
ModelNo.277155BL/BK/GN/RD/GY
ModelNo.277154BL/BK/GN/RD/GY
Perforated Metal Steel Bench With Back
Model No.262077BL/BK/GN/RD/GY
Model No.694557BL/BK/GN/RD/GY
Model No.695744BL/BK/GN/RD/GY
Expanded Metal Steel Bench With Back
Model No.277155BL/BK/GN/RD/GY
Model No.277154BL/BK/GN/RD/GY
Model No.695743BL/BK/GN/RD/GY

1
1
H2
H3
H1
2
MetalMeshBenchwithBack
1
2
3
H2
H3
H1
3
H2
H4
H3
4
3
H1
H3
H2
4
4
277CP23