Globalmediapro HD-SDI CAT5 Series User manual

1
HD-SDI CAT5 Extender Series
ITEM NO.: SDI05A
HD-SDI CAT5 Extender is a active devices which use CAT5e/CAT6 cable to send HD-SDI signals
up to 100m. It is perfect to send HD CCTV over existing CAT5 cable Applications include HD-CCTV,
broadcasting, HD camcorder, studio-to-studio, post production, live events, medical imaging
displays, and medical imaging…etc.
SDI05AHD-SDI CAT5 Extender with Data
To send HD/SD-SDI signal over CAT5e/6 UTP cable.
Built in RS485 data.
Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M).
Up to 100 meters via CAT5e/CAT6 cable at HD-SDI resolution.
Optional model: SR01 signal repeater for longer distance application.
Built in Equalizer to increase the working distance and signal reliability.
Installation View:
Optional Model: SR01 Signal Repeater (order separately)
Extend data signal for an additional 120meters.
Application for SDI05A signals for extra long range transmission.
Ability to cascade connection with multiple SR01 for long range transmission
Built in LED status indication.
External power required.
Plug and play for easy installation.
Work with SDI05A HD-SDI CAT5 Extender:

2
HD-SDI over Coax Cable：
HD-SDI Coax cable recommend to use high quality RG6U, 75Ω Coaxial Cable, low quality
coaxial cable or BNC connector may cause signal loss and effect transmission distance and
reliability.
HD-SDI over CAT5 Cable :
Video Link cable using high quality CAT5E UTP/STP/FTP or CAT6 UTP cable.
HD resolution (1.45Gbps:720p,1080i,1080p@24/25/30Hz): Max. distance 100M
To add model no: SR01 signal repeater for longer distance application.
Video Resolution:
SDI05AT Input
SDI05AR Output
576i@50Hz / 720p@50Hz
720p@50Hz
480i@60Hz / 720p@60Hz
720p@60Hz
1080p@24Hz
1080p@24Hz
1080i@50Hz / 1080p@25Hz
1080p@25Hz
1080i@60Hz / 1080p@30Hz
1080p@30Hz
1080p@50Hz
1080p@50Hz
1080p@60Hz
1080p@60Hz
SDI05AT LED Indication:
Green On Power on
Blue On SDI signal input
RJ45 LED Indication:
Green On Connection
Yellow Flash Data Transmission
SDI05AR LED Indication:
Green On Power on
Blue On SDI signal output
RJ45 LED Indication:
Green On Connection
Yellow Flash Data Transmission
Max. distance via high quality 75Ω Coaxial Cable ( Belden 1694A RG6U Testing)
HD resolution (1.45Gbps:720p,1080i,1080p@24/25/30Hz )
100M

3
Panel View:
SDI05AT
SDI05AR
RJ45 Define:
Link Cable ( TIA/EIA-568-B )
1. Orange-white Data 1 +
2. Orange Data 1 -
3. Green-white Data 2 +
4. Blue N/C
5. Blue-white N/C
6. Green Data 2 -
7. Brown-white N/C
8. Brown N/C
RS485 Setting：
SDI05A RS485 is half duplex mode, the Data Baud Rate Default is 9600. If need
to change the different data Baud rate, please go to webpage to change the
setting.
The setting step as below:
1. Under PC internet link, change IP address to 192.168.168.1, change subnet
mask to 255.255.255.0

4
2. After setting, put the IP as below
192.168.168.55 →SDI05AT Management webpage
192.168.168.56 →SDI05AR Management webpage
3. After login webpage select System→Uart Settings: to find the data rate you
want to change, then press OK.

5
Caution:
The cabling must away from any equipment with electromagnetic wave, i.e.:
microwave, radio equipment, high voltage.
Specification:
ITEM NO
SDI05AT
SDI05AR
Video Input / Output
BNC x 1 (75 Ω) MALE
Support Resolution
SMPTE 259M - SD-SDI(270 Mbps)
SMPTE 292M - HD-SDI(1.485 Gbps)
Transmission Interface
RJ45 x 1
RS485 Interface
Terminal x 1
Transmission Distance
100 meters
Power Supply
DC 5V 2 Amp
Power Consumption
1200mA
Temperature
Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95%
Dimensions mm
67 x 140 x 27
Weight g
230
Rev.A