Globalmediapro HE01ST User manual

HDMI CAT5 Extender Over Single cable Series
ITEM NO.: HE01ST, HE01SR, HE01SLR, HE01SER
The HDMI CAT5 Extender is using only one cost effective CAT5E/6 cable to extend your HDTV
display up to 70 meters at 1080i and 50 meters at 1080p. It is equipped with HDMI
connectors and also supports DVI equipment with allowing used with a HDMI to DVI adapter.
It provides an easy and flexible cabling solution for integrating home theater components.
HE01S HDMI CAT5 Extender – Single CAT5 cable 50 Meters
Extends HDMI signal over one CAT5/5e/6 cable.
HDMI 1.3 compliant.
Transmission range up to 70M at 1080i, 50M at 1080p resolution.
Built in auto equalization for easy plug and play.
Transmitter unit built in EDID backup function.
No external power requested at receiver unit under distance 30 meters.
HDCP compatible.
Optional HDMI CAT5 Receiver: HE01SLR, HE01SER
Optional HDMI CAT5 Receiver
HE01SLR HDMI CAT5 Receiver – Chainable Function
Work with HE01ST as receiver for extra remote HDMI display equipment.
Built in Loop out, could be daisy chained for another HE01SLR to extended
working range and multiple displays.
Built in auto equalization, retiming, pre-emphasized for optimum performance.
Transmission range up to 70M at 1080i, 30M at 1080p resolution.

HE01SER HDMI CAT5 Receiver – Passive type
Work with HE01ST as economic type receiver.
Passive, no external power required.
HDMI 1.3 compliant.
Extend the transmission distance up to 50M at 1080i / 720p
Extend the transmission distance up to 30M at 1080p.
Installation view:
2

Panel view & Function:
HE01ST
Transmitter Unit LED Indication:
BLUE ON Poweron
Flash Under backup TV EDID, wait TV accept.
Flash one time TV EDID backup completed
Flash two times TV EDID backup failed, incorrect EDID.
Flash three times TV EDID backup failed, EDID checksum error
RJ45 Connector LED:
GREEN ON Sending power or video to receiver unit
YELLOW ON No data input or unsupported video format
Dip Switch function:
1↑Use the default EDID.
↓Use the backup TV EDID. ( If backup TV EDID is not correct, it will auto
select the first default EDID)
2↑Select the first default EDID: support 1080i / LPCM 2 Channel.
↓Select the second default EDID: support 1080p / LPCM 5.1 Channel.
3↑Normal
↓BackupEDID (The Dip Switch 1 must at ↓ position, then to start backup).
4Reserve (Dip switch 4 , do not move to ↓)
After complete Dip Switch setting, power must be reset ( unplug and plug) to activate
the new EDID.
HE01SR
HE01SR Receiver unit LED Indication:
BLUE ON Using external power adapter
RJ45 Connector LED:
GREEN ON Power and HDMI signal received from transmitter unit
3

YELLOW ON No data input or signal too weak
HE01SLR
HE01SLR Receiver Unit LED Indication:
BLUE ON Using external power adapter
GREEN ON Power and HDMI signal received from transmitter unit
YELLOW ON No data input or signal too weak
HE01SER
HE01SER Receiver Unit LED Indication:
GREEN ON Sending power or video to receiver unit
YELLOW ON No data input or unsupported video format
Cable:
Link cable using high quality CAT5e UTP or CAT6 UTP cable.
CAT6 cable is recommend based on distance over 30 meters.
Using FTP (STP) cable could have interference rejection, but may cause distance shorter.
Transmission Distance:
The transmission distance will be affected from different HDMI equipment and cable
quality. Lower resolution and good quality cable could extend longer distance up to 100
meters.
HE01ST to HE01SR
Resolution/Cable Distance(Meter)
1080p/CAT5 45
1080p/CAT6 50
1080i,720p/CAT5 70
HE01ST to HE01SLR
Resolution/Cable Distance(Meter)
1080p/CAT5 30
1080p/CAT6 35
1080i,720p/CAT5 70
HE01ST to HE01SER
Resolution/Cable Distance(Meter)
1080p/CAT5 30
1080p/CAT6 35
1080i,720p/CAT5 50
4

RJ45 Define:
Video Link (use TIA/EIA-568-B)
1. Orange-white TMDS DATA2 +
2. Orange TMDS DATA2 -
3. Green-white TMDS CLOCK + / HDMI 5V
4. Blue TMDS DATA1 +
5. Blue-white TMDS DATA1 -
6. Green TMDS CLOCK - / HDMI 0V
7. Brown-white TMDS DATA0 +
8. Brown TMDS DATA0 -
Caution:
1. The cabling must away from any equipment with electromagnetic wave, such
as microwave ovens, mobile phones, radio equipment, power lines.
2. Our HDMI CAT5 Extender not networking product, please do not connect with
any Ethernet to avoid any damage.
Specification:
ITEM NO. HE01ST HE01SR
Video Bandwidth 2.25 Gbps (HDMI 1.3)
Resolution 480i/p, 720p, 1080i/p @ 24/50/60Hz
Link Cable Distance CAT5e 70M @1080i, CAT5e 45M @1080p
Input TMDS Signal 1.2 volts peak to peak
Input DDC Signal 5 Volts peak to peak
HDMI Connector HDMI 19 pin type female connector
Link Connector RJ-45 Shielded with 2 indication LEDS
Power Supply 5V DC 2AMP regulated (External) x 2
Power Consumption 1200mA (Max) 700mA (Max)
Temperature Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95%
Dimensions W x H x D mm 120x67x27 120x67x27
Weight 180 g 170g
ITEM NO. HE01SLR HE01SER
Resolution 480i/p, 720p, 1080i/p @ 24/50/60Hz
Distance Cat.5e 70M @1080i,
Cat.5e 30M @1080p Cat.5e 50M @1080i, Cat.5e 30M @1080p
HDMI Connector Type A
Link Connector RJ-45
Loop Out Connector RJ-45
Power Supply Regulated 5V / 2A X
PowerConsumption 1150mA(Max) mA(Max)
Dimensions 110×67×27 mm 24×57.5×22.2 mm
Shipping Weight 180 g 25 g
5