Globalmediapro HE01ST User manual

HDMI CAT5 Extender Over Single cable Series
ITEM NO.: HE01ST, HE01SR, , HE01SLR, HE01SER
The HDMI CAT5 Extender is using only one cost effective CAT5E/6 cable to extend your HDTV
display up to 70 meters at 1080i and 40 meters at 1080p. It is equipped with HDMI
connectors and also supports DVI equipment with allowing used with a HDMI to DVI adapter.
It provides an easy and flexible cabling solution for integrating home theater components.
HE01S HDMI CAT5 Extender –Single CAT5e cable
Extends HDMI signal over one CAT5e/6 cable.
HDMI 1.3 compliant.
Transmission range up to 60M at 1080i, 40M at 1080p resolution.
Built in auto equalization for easy plug and play.
Transmitter unit built in EDID backup function.
No external power requested at receiver unit under distance 30 meters.
HDCP compatible.
Optional HDMI CAT5e Receiver: HE01SLR, HE01SER
Optional HDMI CAT5 Receiver
HE01SLR HDMI CAT5 Receiver –Chainable Function
Work with HE01ST as receiver for extra remote HDMI display equipment.
Built in Loop out, could be daisy chained for another HE01SLR to extended
working range and multiple displays.
Built in auto equalization, retiming, pre-emphasized for optimum performance.
Transmission range up to 70M at 1080i, 30M at 1080p resolution.

2
HE01SER HDMI CAT5 Receiver –Passive type
Work with HE01ST as economic type receiver.
Passive, no external power required.
HDMI 1.3 compliant.
Transmission range up to 60M at 1080i/720p,40M at 1080p resolution.
No external power requested at HE01SER receiver unit.
Installation view:
Panel view & Function:
HE01ST

3
EDID Setup:
Use default EDID:
move DIP switch 1 off ↑
move DIP switch 2 off ↑ Select the first default EDID: support 1080i / LPCM 2 Channel.
move DIP switch 2 on ↓ Select the second default EDID: support 1080p / LPCM 5.1 Channel.
Use external EDID:
1.move DIP switch 1 on ↓, HE01ST unplug the power.
2. HE01ST connect to HDMI connector of TV for auto backup.
2. Plug the power for HE01ST, TV EDID back up completed ( Blue Power LED keep flash)
3. After complete TV EDID backup, HE01ST power must be reset ( unplug and plug) to activate the
new EDID.
Transmitter Unit LED Indication:
BLUE ON Power on
Flash TV EDID backup completed
RJ45 Connector LED:
GREEN ON Sending power or video to receiver unit
YELLOW ON No data input or unsupported video format
Dip Switch function:
1↑Use the default EDID.
↓Use the backup TV EDID.
2↑Select the first default EDID: support 1080i / LPCM 2 Channel.
↓Select the second default EDID: support 1080p / LPCM 5.1 Channel.
3Reserve (Dip switch 3 , do not move to ↓)
4 Reserve (Dip switch 4 , do not move to ↓)
After complete Dip Switch setting, power must be reset ( unplug and plug) to activate
the new EDID.
HE01SR
HE01SR Receiver unit LED Indication:
BLUE ON Using external power adapter
RJ45 Connector LED:
GREEN ON Power and HDMI signal received from transmitter unit
YELLOW ON No data input or signal too weak
HE01SLR

4
HE01SLR Receiver Unit LED Indication:
BLUE ON Using external power adapter
GREEN ON Power and HDMI signal received from transmitter unit
YELLOW ON No data input or signal too weak
HE01SER
HE01SER Receiver Unit LED Indication:
GREEN ON Sending power or video to receiver unit
YELLOW ON No data input or unsupported video format
Cable:
Link cable using high quality CAT5e UTP or CAT6 UTP cable.
CAT6 cable is recommend based on distance over 30 meters.
Using FTP (STP) cable could have interference rejection, but may cause distance shorter.
Transmission Distance:
The transmission distance will be affected from different HDMI equipment and cable
quality. Lower resolution and good quality cable could extend longer distance up to 100
meters.
HE01ST to HE01SR
Resolution/Cable
Distance(Meter)
1080p/CAT5e
40
1080p/CAT6
45
1080i,720p/CAT5e
60
HE01ST to HE01SLR
Resolution/Cable
Distance(Meter)
1080p/CAT5e
30
1080p/CAT6
35
1080i,720p/CAT5e
70
HE01ST to HE01SER
Resolution/Cable
Distance(Meter)
1080p/CAT5e
40
1080p/CAT6
45
1080i,720p/CAT5e
60

5
RJ45 Define:
Video Link (use TIA/EIA-568-B)
1. Orange-white
TMDS DATA2 +
2. Orange
TMDS DATA2 -
3. Green-white
TMDS CLOCK + / HDMI 5V
4. Blue
TMDS DATA1 +
5. Blue-white
TMDS DATA1 -
6. Green
TMDS CLOCK - / HDMI 0V
7. Brown-white
TMDS DATA0 +
8. Brown
TMDS DATA0 -
Caution:
1. The cabling must away from any equipment with electromagnetic wave, such
as microwave ovens, mobile phones, radio equipment, power lines.
2. Our HDMI CAT5E Extender not networking product, please do not connect
with any Ethernet to avoid any damage.
Specification:
ITEM NO.
HE01ST
HE01SR
Video Bandwidth
2.25 Gbps (HDMI 1.3)
Resolution
480i/p, 720p, 1080i/p @ 24/50/60Hz
Link Cable Distance
CAT5e 60M @1080i, CAT5e 40M @1080p
Input TMDS Signal
1.2 volts peak to peak
Input DDC Signal
5 Volts peak to peak
HDMI Connector
HDMI 19 pin type female connector
Link Connector
RJ-45 Shielded with 2 indication LEDS
Power Supply
5V DC 2AMP regulated (External) x 2
Power Consumption
1200mA (Max)
700mA (Max)
Temperature
Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95%
Dimensions W x H x D mm
120x67x27
120x67x27
Weight
180 g
170g
ITEM NO.
HE01SLR
HE01SER
Resolution
480i/p, 720p, 1080i/p @ 24/50/60Hz
Distance
Cat.5e 70M @1080i,
Cat.5e 30M @1080p
Cat.5e 60M @1080i,
Cat.5e 40M @1080p
HDMI Connector
Type A
Link Connector
RJ-45
Loop Out Connector
RJ-45
Power Supply
Regulated 5V / 2A
X
Power Consumption
1150mA (Max)
mA (Max)
Dimensions
110× 67× 27 mm
24× 57.5× 22.2 mm
Shipping Weight
180 g
25 g