Globalmediapro FV689 HD User manual

On-camera field HD LCD Monitor
User Manual

1
Dear users:
Thank you for purchasing our On-Camera Field HD LCD Monitor Kit.
It employs advanced integrate circuits and high quality TFT LCD modules,
low comsumption, steady function, and low radiation emission. This
monitor designed small-sized, easily operated and safety, with HDMI, VGA,
Video and Audio Inputs, this monitor can be easily be installed on Digital
Camera DSLR or HDV, the best partner for photography.
Key Features:
◆Peaking focus assist function. When press this function button, The object in
the image edges appear white crochet, adjustment of television equipment focus, view
the hook side to reach focus assist effect, convenient to realize high-definition
focusing for photographer.
◆5D Mark II camera model function
◆Image black & white,color switch. Red,Green,Blue(RGB)Monochrome
display
◆Screen Marker（80%,85%,90%,93%,96%）
◆Center Marker
Image flip U/D◆，L/R
I◆mage switch mode 16:9 or 4:3
Brightness, contrast ratio,◆tint, saturation and color temperature
adjust
◆Supported different type batteries (Sony F970, CanonE6,
Panasonic D28S)
To ensure the best use of this product, please read this manual
carefully before hand.

2
Contents
1. Product description.……………………………………….3
1.a. Front veiw.……………………………………………....3
1.b. Rear view and side view.……………………………..4
2. Power input way.……………………………………...........5
3. Operation instruction………………………………………7
3.a. No menu display state………………………………..8
3.b. Press " " button on the unit, then enter
into OSD menu operation………………………………...8
4. Technical parameters …………………………………….13
5. Accessories ……………………………………………......13
5.a. Standard……………………………………………......13
5.b. Optional……………………………………………..... .14
6. Trouble shootings……………………………………........14
7. Remark ……………………………....................................14

3
1. Product description
1.a. Front view
1. Infrared receiving window
2. Indicator light: Red light is power on/standby state, green light is in
working state
3. Power：Power on/off button
4. MODE：Signal source switch button, cycle switch HDMI, VGA,
Video 1, Video 2 model
5. : Item selection button or single press can realize on/off peaking
focus assist mode
6. : Item selection button or NO menu state single press to realize
image monochrome switch(Red,Green,Blue,Black & White and Color),
under overscan state long press this button to realize underscan
function, to make sure that the signal in the 1080i image without
distortion.
7.MENU button, active panel display menu or long press to direct on/off
5D II model
8. : Volume up or switch screen marker or menu setting, increase

4
function value setting
9. : Volume down or switch screen marker or menu setting, decrease
function value setting
10. Panel
1.b. Rear view and side view
1．DC power input

5
2．HDMI HD signal input interface
3．VGA signal input interface
4．Battery plate
5．AV signal input interface
6．Battery plate power output jack
2．Power input way
Please use the adapter attached in the accessories. If necessary to use
other specifications adapter, please note to provide the qualified adapter which
power supply should be not less than 10W (DC6V-24V)
2.a. This product package comes with a 12V/1.2A DC Power adapter
which can be directly inserted to the DC power input.
2.b. other option of power source is using DV batteries. The product
back case including DV battery adapter/plate are available for Sony F970
Series and Sony QM91D Battery. The monitor NO charge circuit design, if
necessary charge please remove to charge by charger.
2.c. Battery plate
battery plate
In the rear of the monitor with a battery plate, can be equipped with
corresponding to the battery, power to monitor. Battery plates with different

6
types, customers can select for their needs.
2.d. Different types battery plates as below:
F970 LP-E6 D28
Sony F970 battery slot for battery of Sony DV:
Sony F970 F960 F950 T930 F770 T750 F730 F570 F550 F530 QM91D
OM91 QM90D QM90 QM71D QM71 QM70D QM70 QM51D QM51 FM71
FM70 serials
Canon LP-E6 battery slot for battery of Canon DV:
Canon LP-06
Panasonic D28 battery slot for battery of Panasonic DV:
Panasonic D55 554S D54SE D40 D35 D33 D32 D28 D25 D22 serials
Picture: Three types of batteries corresponding to the upper three slots
F970 LP-E6 D28
Remark: Different specifications of the batteries, capability is different. The
working time for the monitor will be different. Higher capability (working time)
will be longer.

7
2.e. Battery install way
Suggestion: Better remove the battery for long-term NO use this product.
Different specifications of the batteries, capability is different. The working
time for the monitor will be different. Higher capability (working time) will be
longer.
Without design charging circuit for the monitor, please remove the
battery to the battery charger for charge.
3. Operation instruction
Access to the corresponding signal and power supply.The machine is in a
standby state (red indicator light). At this time press the "POWER" button, if is
in the working state, then repress "POWER" button, the machine returns to
standby state. In the working state, press the "MODE" button on the monitor,
used in switching between HDMI, VGA, VIDEO signals

8
3.a. No menu display state:
Click “ ” to direct on/off peaking focus assist mode
Click “ ” to realize image monochrome switch(Red,Green,Blue,Black &
White and Color), under overscan state long press the button to realize
underscan function, to make sure that the signal in the 1080i image without
distortion.
Long press “MENU” button(about 3-4 seconds), black screen showed on the
image. Release, later machine is transferred to the 5D camera mode, exitⅡ
the 5D camera mode, follow this operation.Ⅱ
Click “ ”,enter viewfinder（80%,85%,90%,93%,96% ）selection
The volume adjustment, click on the " " key to confirm, can adopt " " or
"" key to the volume adjustment, to stop the adjustment, after a period of
time, Volume adjustment indication frame on the screen will disappear
automatically
3.b. Press " " button on the unit, then enter into OSD
menu operation.
Operate “ ”or“ ”on the unit to select submenu. (color);
(menu); (function); (sound); press “ ” or “ ” to confirm
adjustment or submenu, then use “ ”or“ ”to confirm, then use “ ”or“ ”
to adjust or comfirm the adjustment values. If need to exit OSD menu, repress
“” button.

9
3.b.1. （Color）
Enter into "Color" OSD, press “ ”or“ ”button to confirm, then
enter to adjust the color parameters, use ““ ”or“ ”to select
adjustment item, then use“ ”or“ ” adjust the parameters.
※Brightness: To adjust the image's brightness.
※Contrast: To adjust the brightest and darkest ratio of the image,
please note the sense of picture when adjust, proportion too large or
small, will make the picture lose the color of showy.
※Tint: On NTSC Video mode, the image color tint difference is
adjustable by tint.
※Saturation: To adjust color concentration
※Color temperature: Enter into (color)menu, press “ ”or“ ”on
the unit to confirm, press “ ”or“ ” to select the form of color
temperature, then press " ”or“ ” on the unit to confirm, then use

10
“”or“ ” to select color temperature such as: 9300 K, 7500K,
6500K or USER.
When select "USER", use “ ”or“ ” to select color R、G、B,
then use “ ”or“ ” to adjust the value of Analog Data, to make
sure the color of picture meets need.
3.b.2. （OSD）
After select "OSD" function, press “ ”or“ ” button to confirm, then
enter into parameters adjust. Using “ ”or“ ” button to select
optional items, then using “ ”or“ ” button to adjust the parameters.

11
※ Language：Languages for OSD as below:
English 简体中文 Italians Francois
Deutsch Español 繁体中文 Japanese
Korean Pycc
※ H Position：To adjust the OSD position in horizontal.
※ V Position：To adjust the OSD position in vertical.
※ OSD Timeout：To adjust the clock.
※ Transparent：To adjust the level of transparent.
3.b.3. （Function）
After select "function", press “ ”or“ ” button to confirm, then enter
into parameters adjust. Using" ”or“ ” button to select adjustable
items, then using “ ”or“ ” button to adjust the parameters.
※ Reset：Back to original setting.
※ Display Ratio：To change the display ratio 16:9/4:3.

12
※ Screen Marker:（80%, 85%, 90%, 93%, 95%）
※ Center Marker
※ Flip L/R
※ Flip U/D
3.b.4. （Sound）
※Volume: To adjust the volume.

13
4. Parameters
5. Accessories
5.a、Standard
Power adapter DC 12V 1pc
HDMI cable (HDMI to mini HDMI) 1pc
Sun shade 1pc
User manual 1pc
LCD panel TFT LCD 7.0inch 1152000 Pixels
Resolution 800×480
Resolution up to 1920×1440
Brightness 300 cd/㎡
Contrast ratio 500:1
Viewing angle 70°/70（L/R）,50°/60° (U/D)
Video signal input range 0.7～1.4Vp-p/75Ω
Supported input frequency H:30～60kHz V:50～75Hz
HDMI supported formats 480i, 480p, 576i, 576p, 720p,
1080/ 50i/ 60i/ 50p/ 60p；
Speaker output consumption ≥1W/8Ω
Video color system PAL-4.43; NTSC-3.58
Backlight LED
Signal input channel HDMI, VGA, VIDEO1, VIDEO2, AUDIO
Input power voltage range DC6V-24V
Power consumption ≤8 W
Standby current ≤50 mA
Working temperature －20～55℃
Storage temperature －30～65℃
Dimensions 188.4mm X 131mm X 40mm

14
HDMICable Poweradapter Sunshade Usermanual
5.b、Optional
Hot shoe moun AV cable Battery Battery plate
(optional) (optional) (optional) (optional)
6.Trouble shootings
6.a. Only black and white picture.
Please check saturation、brightness & contrast adjustment.
6.b. NO picture after put on the power.
Check signal cable connecting, make sure use the standard adapter
connect the monitor.
6.c. The image color distortion or abnormal, eg. lack some color.
Please check signal cable connect correctly or not. The cable damage or
loose will cause poor transfer, then above malfunction will happen.
6.d. If there exists an abnormal phenomenon, please try to enter into OSD
menu select "reset" to reset.
6.e. No boot:
Check whether normal power connect or the battery is over used,
■Remark:
If there are still other problems, please contact with our related deals.
*If there are changes without prior notice.