Globalmediapro SM-2C User manual

Globalmediapro SM-2C
3G-SDI 4 by 4 Switcher/Splitter
Operation Manual
Operation Manual

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 RS-232 Protocols ...............................5
6.4 Remote Control................................6
7. Connection Diagram ............................ 7
8. Specications ........................................ 8
9. Acronyms ............................................... 9

1
1. INTRODUCTION
The 3G-SDI 4 by 4 Switcher/Splitter allows SD-SDI, HD-SDI and 3G-SDI
signals to be switched from up to four SDI sources and split to four
simultaneous SDI outputs while ensuring high bit rates of 2.970 Gbit/s
to give you high bandwidth signal transmission without signal loss over
long distances and can be controlled via IR or RS-232.
2. APPLICATIONS
•Video broadcasting display
•Professional video program display
•Film studios program monitoring
•Video program switching display
3. PACKAGE CONTENTS
•3G-SDI 4 by 4 Switcher/Splitter
•Remote Control
•5 V/2.6 A DC Power Adaptor
•Operation Manual
4. SYSTEM REQUIREMENTS
SDI source inputs (such as broadcast video cameras or recording
device) and SDI output displays (such as TVs or monitors).

2
5. FEATURES
•Switch between four 3G-SDI input sources and split the output to
four 3G-SDI displays simultaneously
•Operation at 2.970 Gb/s, 2.970/1.001 Gb/s, 1.485 Gb/s,
1.485/1.001 Gb/s and 270 Mb/s
•Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE
292M, SMPTE 259M-C
• Provides equalized and re-clocked transmission
•Control via RS-232, IR remote control (supplied) and on-panel
buttons
•Supports signal input and output distances of up to 300 m for SD
signals, 200 m for HD signals and 100 m for 3G signals.
Note: Tested with Belden 1694A Cable. Operating distances may vary
ifusedwithcablesofdifferentspecications.

5
6.3 RS-232 Protocols
6.3.1 Pin Assignment
Pins denition of modem cable
3G-SDI 4 by 4 Switcher/
Splitter Remote Controller
PIN Denition PIN Denition
1 NC 1 NC
2TxD 2RxD
3RxD 3TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19200 bps
Data bit: 8-bits
Parity: None
Stop bit: 1-bit
Flow Control: None
6.3.2 Commands
Command Action
poweroff Power OFF
poweron Power ON
input01 Input selection 1
input02 Input selection 2
input03 Input selection 3
input04 Input selection 4
?input Inquire Current Input selection
Note: All the RS-232 command will be not executed unless followed
with a carriage return. Commands are Case-Sensitive.

8
8. SPECIFICATIONS
SMPTE Standard 425M Level A & B, 424M, 292M, 259M-C
SDI Transmission
Rates
2.970 Gbit/s and 2.970/1.001 Gbit/s
Input 4×BNC (SD/HD/3G-SDI)
Output 4×BNC (SD/HD/3G-SDI)
SDI Timing Support SD-SDI:
SMPTE 259M-C, 270 Mbit/s
HD-SDI:
SMPTE 292M, 1.485 & 1.485/1.001 Gbit/s
3G-SDI:
SMPTE 424M/425M-AB, 2.970 &
2.970/1.001 Gbit/s
Power Supply 5 V DC/2.6 A (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
SDI Cable Distance 3G-SDI up to 100 m (BELDEN 1694A)
HD-SDI up to 200 m (BELDEN 1694A)
SD-SDI up to 300 m (BELDEN 1694A)
Dimensions 200 mm (W)×138 mm mm(D)×30 mm (H)
Weight 900 g
Chassis Material Metal
Silkscreen Color Black
Operating
Temperature
0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage
Temperature
−20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (Non-condensing)
Power Consumption 5 W

9
9. ACRONYMS
ACRONYM COMPLETE TERM
3G Bandwidth 2.97Gbit/s ≈ 3G
BNC Bayonet Neill-Concelman
HDMI High Denition Multimedia Interface
SDI Serial Digital Interface