Globe Internet Unlimited Single User Wi-Max USB Modem User manual

Globe Internet Ltd
User Guide Page 1
Unlimited Single User Wi-Max USB Modem
User Guide

Globe Internet Ltd
User Guide Page 2
Installation
Please follow the given instruction to successfully install WiMax USB Modem to your computer.
1. Connect WiMax USB Modem to your Computer( running on XP,Vista,Win7 and Win8 )
using the given USB cable and wait until the pop-up dialog box appears.
2. As shown in figure, select “Run sqn4g_setup.exe” to initiate the installation.
3. Select Next.

Globe Internet Ltd
User Guide Page 3
4. Please select the path where you want to install the setup.( default option can be selected)
5. Please select next to continue.

Globe Internet Ltd
User Guide Page 4
6. Select install to begin the installation. Process will take few minutes and depend on the
performance of you computer.
7. Please select finish to complete the installation.

Globe Internet Ltd
User Guide Page 5
Indications
Following diagram explains the indications on the front panel of USB the modem.
A - Power Indicator.
Once the physical connection established between the computer and the USB modem,
this indicator starts lighting.
B - Signal Level Indicator
This shows the available signal level of the location. Signal level indicates with three
different colours.
Blue - Excellent
Green - Low
Red - No Signal
C - Ethernet Indicator
This shows the Ethernet connectivity. Upon successful connection, green colour light
will be blinking.