Godox FV Series User manual

中英文双语 / Chinese English Bilingual 说明手册 / INSTRUCTION MANUAL
高速同步闪光LED灯
705-FV1500-00 Made in China
地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋1层至4层、4栋1层至4层
1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street,
Bao’an District, Shenzhen, China
电话/Tel: [phone](8062) 传真/Fax: [phone]
邮箱/E-mail: [email protected] http://www.godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
/
High Speed Sync Flash LED Light

Thank you for purchasing this Godox Product!
• Built-in Godox 2.4G wireless X system, compatible with cameras of multiple brands.
• Supports 1/8000s high-speed sync function when being used as flash.
• Over 10 continuous flashes per second and 8 continuous flashes per second in high-speed sync mode in 1/2
power output.
• Clear LCD display.
• The light brightness of the flash is four times of LED light's, which increases the freezing ability of instantaneous
action.
Main Features:
• Can both serve as a flash and an LED light.
• With 16 groups and 32 channels wireless control.
• Bowens-mount enables to install various of accessories.
• Excellent heat dissipation.
Flash Video Light FV series add flash functions based on the traditional LED light. FV series can be served as a
flash, as well as an LED light. With strong power, abundant functions and 8 special effects modes, it can achieve
creative shooting easily.
• With U-type bracket to adjust different angles easily.
• With stable light source and 0% to 100% precise light adjustment when being used as LED light.
• With 8 FX special effects mode to simulate various of shooting scene.
Foreword
Always keep this product dry. Do not use in rain or in damp conditions.
As this product do not have waterproof function, please take measures of waterproof in rainy or damp
environment.
Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance
center.
Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain
circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or
electromagnetic interference may result.
As this product has built-in lithium battery, do not disassemble, impact, squeeze or put it into fire. If serious
bulge occurs, please do not use. Do not use or store the product if the ambient temperature reads over 50℃.
Please charge the product with specialized charger and correctly operate it within the defined voltage and
working temperate according to the instruction manual.
Keep out of reach of children.
Warning
Body
Main Body
Protect Cover
LED Light
Umbrella Input
U-type Bracket
Thermovent 2
Bowens Mount
Accessory Locking
Ring
Thermovent 1
Thermovent 3
Handle
PC同步插孔
C
Channel
Brightness
Color
Temperature
Remote Control
Group
SET
SET
C
LCD Panel
(Black in
White)
Power
Switch CH/GR
Button
SET Button
“-” Button “+” Button
Battery
Compartment
Cover
Battery
Compartment
Bracket
Locking Ring
Air Inlet
Modeling Lamp/
Special Effects Button
& Adjustment Button
PC Sync
Cord Jack
LCD Panel
Button
Button
LED
Power Input Socket
Power Switch
TEST Button
MENU Button
Power/Light
Brightness Button Battery
level
indication
- 09 - - 10 -

LED MENU TEST
LED MENU TEST
LED MODE FLASH MODE
LED MENU TEST
LCD Panel
LCD Panel
Group
LCD Panel
Flash
Color Temperature
Modeling Lamp
Heat Protection Icon
Power/Light Brightness
1. Flash video light 2. RC-A6 Remote control 3. Power cord 4. Standard reflector 5. Lamp cover
Included Items
Channel/ID
Special Effect
Separately Sold Accessories
The product can be used in combination with the following accessories sold separately, so as to achieve best
photography effects: XPro, X2 or XT32 remote control, Power Inverter, Softbox, Photographic Umbrella, Light
Stand, Barndoor, Snoot, etc.
Power Connection
Use the power cord to connect the flash to an AC power source and turn on the power switch.
Flash Setting
Button
This button can be pressed to switch LED mode or flash
mode. Short press the button and LED will be displayed,
which means the light can be used as an LED. When is
displayed, the light can be used as a flash.
Power Adjustment
In flash mode, the flash power can be adjusted by light
brightness adjustment button from 1/16 to 1/1 or 6.0 to 10.
And the power output will be clearly displayed on the LCD
Panel. “OF” on the display indicates that the flash triggering
function is turned off. Press the Test button to discharge
power when the flash output is adjusted from high to low.
Light Brightness Adjustment
In LED mode, the light brightness of LED light can be
adjusted by light brightness adjustment button from 0% to
100%. And the light brightness will be clearly displayed on
the LCD Panel.
Test Button
To fire the flash without taking a picture, press the test
button. It can also help adjust the flash output and light
brightness when combined with the light brightness
adjustment button. Hold down the light brightness and turn
on the light, the version will be displayed on the LCD panel
and this operation can also be used to restore factory
setting.
LED
- 11 - - 12 -
Operation
1
2 3
45

LED MENU TEST
LED MENU TEST
LED MENU TEST
GR/CH Button
Special Effects ON/OFF: In LED mode, press the
modeling lamp/special effects button, and the special
effects will be on or off. Turn the modeling lamp/special
effects button to choose from the eight special modes.
Short press the GR/CH button can adjust the wireless
groups. When the group icon on the LCD panel is blinking,
turn the light brightness adjustment button to set the
groups. Long press the GR/CH button to adjust the
wireless channels. When the channel icon on the LCD
panel is blinking, turn the light brightness adjustment
button to set the channels.
Modeling Lamp/Special Effect Button
Modeling lamp ON/OFF: In flash mode, press the
modeling lamp/special effects button to turn on or off the
modeling lamp. When modeling lamp is on, turn the
modeling lamp/special effects button to adjust the light
brightness of modeling lamp from 5% to 100%.
MENU Button
Press the Menu button to enter custom setting area.
Custom Function Setting
Custom Function
Signs
F1
F2
Functions
Wireless ID
Power output
display mode
Setting Signs
OF
01~ 99
1/P
P.P
Settings & Descriptions
Off ID
Choose any figure from 01~99
Display power in the form of fractions
Display power in the form of fraction decimal
Restrictions
No
Flash mode
Wireless Control in LED Mode
With 2.4G wireless system, FV series have remote grouping and control function. Up to 16 groups of LED lights
can be controlled. 32 channels and 100 wireless IDs are available with strong anti-interference capability.
Please set the channels and groups of LED light to the same as those of RC-A6 remote control before usage.
Adjusting Channel/Group with the Remote Control
● Press the CH/GR button and the group icon blinks. Press the“-”“+”button to choose a group (A to F, 0 to 9).
● Press the CH/GR button twice and the channel icon blinks. Press the“-”“+”button to choose a channel (1 to 32).
Adjusting ID with the Remote Control
● Double click the CH/GR button and press the“-”“+”button to choose ID from OFF or 0 to 99.
Adjusting Light Brightness with the Remote Control
● Press the“-””+“button to adjust the light brightness.
Adjusting Color Temperature with the Remote Control
● Press the SET button of the remote control and the color temperature icon blinks. Press the“-”“+”button to adjust
the color temperature.
Remote control reset: press down "-" and "+" button simultaneously to reset.
XPro series: Set the C.Fn-DIST to 0-30m.
→Please turn on the “close distance wireless mode” on the flash trigger (＜0.5m):
4. Whether the flash trigger and the receiver end equipment are in the low battery states or not
1. Disturbed by the 2.4G signal in outer environment (e.g. wireless base station, 2.4G wifi router,
Bluetooth, etc.)
→ To adjust the channel CH setting on the flash trigger (add 10+ channels) and use the channel which is not
disturbed. Or turn off the other 2.4G equipment in working.
2. Please make sure that whether the flash has finished its recycle or caught up with the continuous
shooting speed or not(the flash ready indicator is lighten) and the flash is not under the state of over-
heat protection or other abnormal situation.
→Please downgrade the flash power output. If the flash is in TTL mode, please try to change it to M mode(a
preflash is needed in TTL mode).
X1, X2 and XPro series: press the test button and hold on, then turning it on until the flash ready indicator
blinks for 2 times.
3. Whether the distance between the flash trigger and the flash is too close or not
→Please replace the battery(the flash trigger is recommended to use 1.5V disposable alkaline battery).
The Reason & Solution of Not Triggering in Godox 2.4G Wireless
Note: The wireless signal can be received only when the controller of LED light is powered on.
- 13 - - 14 -
Flash Mode
In flash mode, FV series has 2.4G wireless receiving functions. Purchase Godox X
series flash trigger e.g. X1, X2, XPro series and XT 32 flash trigger to wirelessly
control FV series' power, modeling lamp's on/off and triggering.
2.4G Wireless control
Display
Scene
FX1
Flash1
FX2
Flash2
FX3
Flash3
FX4
Storm1
FX5
Storm2
FX6
Storm3
FX7
TV
Fx8
Broken bulb
LED Special Effects Mode
In LED mode, 8 FX special effects mode can be set to simulate various of shooting scene and achieve creative
shooting.
Sync Triggering
The sync cord jack is aΦ3.5mm plug. Insert a trigger plug
here and the flash will be fired synchronously with the
camera shutter.
Setting color temperature range
The factory setting of remote control's color temperature range is 2500-10000K.
In order to use remote control conveniently, color temperature range settings are added: when the remote
control is off, hold down the SET button and turn it on to enter color temperature adjusting interface. Press
CH/GR button to switch the lowest and highest color temperature value and press "-" or "+" button to change the
value. Press the SET button to confirm it.

Flash Video Light
Power Supply
Power
Color Temperature
100% Light Brightness(LUX,1M)
CRI ≈
TLCI ≈
Light Brightness Range
Operation Temperature
Power Output
Channel
Group
Dimension
(not included a standard reflector)
Net Weight
FV150
AC100V-240V (50/60Hz)
150W
5600±200K
≈12000
96
96
10%-100%
-10°C ~ 50°C
1/16-1/1 or 6.0-10.0
32
16(A, B, C, D, E, F, 0-9)
34x20x16cm
3.13Kg
FV200
200W
≈18000
36.7x20x16cm
3.33Kg
Technical Data
Remote Control
Power Supply
Wireless Frequency
Distance (emptiness)
Channel
Group
Standby Time
Operation Temperature
Dimension
Net Weight
RC-A6
3.0V(AAA*2)(not include)
2.4GHz
50m
32
16 groups(A-F, 0-9)
Over one year
-10°C ~ 50°C
120*38*15mm
30g
FCC Warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
▪ Consult the dealer or an experienced radio/TV technician for help.
*RF warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
▪ Reorient or relocate the receiving antenna.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- 15 - - 16 -