gofanco HDExtCoax User manual

1080p HDMI Extender
over Coaxial
User's Guide
G4-0125A
P/N: HDExtCoax

2
Thank you for purchasing from gofanco. Our
products aim to meet all your connectivity needs
wherever you go. For optimum performance
and safety, please read the instructions carefully
and keep this User’s Guide for future reference.
If you need more information about our
products, please visit www.gofanco.com. For
technical support, please email us at
[email protected]. For drivers/manuals
download, please go to www.gofanco.com/
downloads.
Important Safety Notices
Please read safety instructions carefully before
installation and operation.
• Please pay close attention to all warnings
and hints for this device
• Do not expose this unit to rain, heavy
moisture, or liquid
• Do not repair the device or open the
enclosure without professional guidance
to avoid electric shocks. Doing so may void
your warranty
• Keep the product in a well-ventilated
location to avoid damage from overheating

3
• Shut off power and make sure environment
is safe before installation
• Do not plug the HDMI cables in/out when
the device is in use to avoid cable damage.
• Use the included DC5V power adapters
only. Make sure the specification matches
if using 3rd-party DC power adapters
Introduction
The 1080p HDMI Extender over Coaxial extends
HDMI transmission up to 660ft (200m) at 1080p
over Coaxial cable.
Features
• Supports1080p@60Hz/50Hz,720p@60Hz/
50Hz, 480p @60Hz
• Near zero latency
• Sturdy surface mountable aluminum
enclosure
• Power consumption: 3 Watts
PackageContents
• 1080p HDMI Extender over Coaxial (1
Transmitter & 1 Receiver)
• 2x Power adapters (5VDC)
• User's guide

4
Installation Requirements
1. HDMI source device (computer, DVD
player, XBOX, PS3, etc)
2. HDMI display device (SDTV/Monitor,
HDTV/Monitor, projector, etc.)
3. COAX cable and HDMI cables
Product Layout
Transmitter TX Front and Rear Panel
1HDMI In: Connects to your HDMI source
device using an HDMI cable (HDMI cable
not included)
2PowerJack: Connects tothe included power
adapter
3COAX Out: Connects to the Receiver's
COAX In connector using a COAX cable
(COAX cable not included)
APower LED: On when the TX is powered on
BData LED: Flashing when data is
transmitting
AB

5
Receiver RX Front and Rear Panel
4COAX In: Connects to the Transmitter's
COAX Out connector using a COAX cable
(COAX cable not included)
5HDMIOut: Connects toyourHDMIdisplay
using an HDMI cable (HDMI cable not
included)
6PowerJack: Connects tothe included power
adapter
APower LED: On when the RX is powered on
BData LED: Flashing when data is
transmitting
Product Layout Continued
AB

6
Hardware Installation
1. Power off all devices including your HDMI
source and HDMI display.
2. Connect your HDMI source device to the
Transmitter's HDMI In connector with an
HDMI cable (HDMI cable not included).
3. Connect a COAX cable between the
Transmitter's COAX Out and Receiver's
COAX In (COAX cable not included).
4. Connect your HDMI display to the
Receiver's HDMI Out connector with an
HDMI cable (HDMI cable not included).
5. Plug the included power adapter into the
Transmitter's and Receiver's power jack,
then plug the power adapters into a reliable
power source.
6. Power on all connected devices.
7. The HDMI extender is ready for use.

7
Connection Diagram
Specifications

Thank you for choosing gofanco
www.gofanco.com
Disclaimer
The product name and brand name may be
registered trademarks of related manufacturers.
TM and ® may be omitted on the user’s guide.
The pictures on the user’s guide are just for
reference, and there may be some slight
differences with the actual products.
We reserve the right to make changes without
prior notice to a product or system described
herein to improve reliability, function, or design.