gofanco AudioCATExt User manual

Coaxial/Toslink CAT5e/6
Extender - 300m
User's Guide
G4-0079A
P/N: AudioCATExt

2
Thank you for purchasing from gofanco. Our
products aim to meet all your connectivity needs
wherever you go. For optimum performance
and safety, please read the instructions carefully
and keep this User’s Guide for future reference.
If you need more information about our
products, please visit www.gofanco.com. For
technical support, please email us at
[email protected]. For drivers/manuals
download, please go to www.gofanco.com/
download.
Important Safety Notices
Please read safety instructions carefully before
installation and operation.
• Please pay close attention to all warnings
and hints for this device
• Do not expose this unit to rain, heavy
moisture, or liquid
• Do not repair the device or open the
enclosure without professional guidance
to avoid electric shocks. Doing so may void
your warranty
• Keep the product in a well-ventilated
location to avoid damage from overheating

3
• Shut off power and make sure environment
is safe before installation
• Do not plug the Coaxial, Toslink, and CAT
cables in/out when the device is in use to
avoid cable damage. Make sure they are
plugged into the correct ports
• UsetheincludedDC5Vpoweradapteronly.
Makesurethe specification matches if using
3rd-party DC power adapters

4
Introduction
The Coaxial/Toslink CAT5e/6 Extender - 300m
extends digital audio signals up to 300 meters
using an economical CAT5e/6 cable.
Features
• Transmits Coaxial/Toslink digital audio
signals from source device to Coaxial/
Toslink audio output devices such as TVs,
AVRs, and speakers up to 300 meters using
economical CAT5e/6 cable
• Supports Digital Coax or Optical Toslink
signals
• Power over Cable (PoC) allows one power
adapter, connected to the Transmitter, to
power the Receiver over CAT cable
• High performance with no signal loss
PackageContents
• Coaxial/Toslink CAT5e/6 Extender - 300m
• Power adapter (1pc)
• User's Guide

5
Product Layout
Figure 1: Transmitter (TX)
󳎲󳎯󳎡󳏑󳏰󳏸󳏦󳏳󳎡󳏋󳏢󳏤󳏬 󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏴󳎡󳏵󳏰󳎡󳏵󳏩󳏦󳎡󳏪󳏯󳏤󳏭󳏶󳏥󳏦󳏥󳎡󳏅󳏄󳎡󳎶󳏗󳎡󳏱󳏰󳏸󳏦󳏳󳎡󳏢󳏥󳏢󳏱󳏵󳏦󳏳
󳎳󳎯󳎡󳏓󳏋󳎵󳎶󳎡󳏐󳏶󳏵󳏱󳏶󳏵 󳏍󳏪󳏯󳏬󳏴󳎡󳏵󳏰󳎡󳏵󳏩󳏦󳎡󳏓󳏋󳎵󳎶󳎡󳏊󳏯󳏱󳏶󳏵󳎡󳏰󳏧󳎡󳏵󳏩󳏦󳎡󳏓󳏦󳏤󳏦󳏪󳏷󳏦󳏳
󳎴󳎯󳎡󳏄󳏰󳏢󳏹󳏪󳏢󳏭󳎡󳏊󳏯󳏱󳏶󳏵 󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏴󳎡󳏵󳏰󳎡󳏢󳎡󳏄󳏰󳏢󳏹󳏪󳏢󳏭󳎡󳏢󳏶󳏥󳏪󳏰󳎡󳏴󳏰󳏶󳏳󳏤󳏦󳎡󳏥󳏦󳏷󳏪󳏤󳏦
󳎵󳎯󳎡󳏕󳏰󳏴󳏭󳏪󳏯󳏬󳎡󳏐󳏱󳏵󳏪󳏤󳏢󳏭󳎡󳏊󳏯󳏱󳏶󳏵󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏴󳎡󳏵󳏰󳎡󳏢󳎡󳏕󳏰󳏴󳏭󳏪󳏯󳏬󳎡󳏐󳏱󳏵󳏪󳏤󳏢󳏭󳎡󳏢󳏶󳏥󳏪󳏰󳎡󳏴󳏰󳏶󳏳󳏤󳏦󳎡󳏥󳏦󳏷󳏪󳏤󳏦

6
Figure 2: Receiver (RX)
Hardware Installation
1. Power off all devices including your audio
source and audio output device.
2. Connect your audio source device to the
Transmitter's Coaxial or Toslink Input
connector with a Coaxial or Toslink cable
(cable not included). *Note: Only one input
connector can be used at any one time.
3. Connect a CAT5e/6 cable between the
Transmitter's RJ45 Output and Receiver's
RJ45 Input (cable not included).
󳎲󳎯󳎡󳏓󳏋󳎵󳎶󳎡󳏊󳏯󳏱󳏶󳏵 󳏍󳏪󳏯󳏬󳏴󳎡󳏵󳏰󳎡󳏵󳏩󳏦󳎡󳏓󳏋󳎵󳎶󳎡󳏐󳏶󳏵󳏱󳏶󳏵󳎡󳏰󳏧󳎡󳏵󳏩󳏦󳎡󳏕󳏳󳏢󳏯󳏴󳏮󳏪󳏵󳏵󳏦󳏳
󳎳󳎯󳎡󳏄󳏰󳏢󳏹󳏪󳏢󳏭󳎡󳏐󳏶󳏵󳏱󳏶󳏵 󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏴󳎡󳏵󳏰󳎡󳏢󳎡󳏄󳏰󳏢󳏹󳏪󳏢󳏭󳎡󳏢󳏶󳏥󳏪󳏰󳎡󳏰󳏶󳏵󳏱󳏶󳏵󳎡󳏥󳏦󳏷󳏪󳏤󳏦
󳎴󳎯󳎡󳏕󳏰󳏴󳏭󳏪󳏯󳏬󳎡󳏐󳏱󳏵󳏪󳏤󳏢󳏭󳎡󳏐󳏶󳏵󳏱󳏶󳏵󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏴󳎡󳏵󳏰󳎡󳏢󳎡󳏕󳏰󳏴󳏭󳏪󳏯󳏬󳎡󳏐󳏱󳏵󳏪󳏤󳏢󳏭󳎡󳏢󳏶󳏥󳏪󳏰󳎡󳏰󳏶󳏵󳏱󳏶󳏵󳎡󳏥󳏦󳏷󳏪󳏤󳏦

7
4. Connect your audio output device (TV,
AVR,speakers,etc.)totheReceiver'sCoaxial
and/or Toslink Output connector (cables
not included). Note: Both Coaxial and
Toslink Outputs can be connected and
produce sound simultaneously.
5. Plug the included power adapter into the
Transmitter's power jack, then plug the
power adapter into a reliable power source.
Power over Cable (PoC) technology allows
the power adapter connected to the
Transmitter to power the Receiver through
CAT cable.
6. Power on all connected devices.
7. The extender is ready for use.

8
Application
Coaxial Audio Source Device
Toslink Audio Source Device

9
Specifications
󳏐󳏱󳏦󳏳󳏢󳏵󳏪󳏯󳏨󳎡󳏕󳏦󳏮󳏱󳏦󳏳󳏢󳏵󳏶󳏳󳏦 󳎳󳎴󳎡󳏵󳏰󳎡󳎺󳎶󳏇󳎡󳎩󳎮󳎶󳎡󳏵󳏰󳎡󳎴󳎶󳏄󳎪
󳏐󳏱󳏦󳏳󳏢󳏵󳏪󳏯󳏨󳎡󳏉󳏶󳏮󳏪󳏥󳏪󳏵󳏺 󳎶󳎦󳎡󳏵󳏰󳎡󳎺󳎱󳎦󳎡󳏓󳏉󳎡󳎩󳏯󳏰󳏯󳎮󳏤󳏰󳏯󳏥󳏦󳏯󳏴󳏪󳏯󳏨󳎪
󳏅󳏢󳏵󳏢󳎡󳏕󳏳󳏢󳏯󳏴󳏧󳏦󳏳󳎡󳏓󳏢󳏵󳏦 󳎲󳎳󳎯󳎹󳎡󳏎󳏣󳏱󳏴
󳏂󳏶󳏥󳏪󳏰󳎡󳏇󳏰󳏳󳏮󳏢󳏵 󳏅󳏰󳏭󳏣󳏺󳎡󳎶󳎯󳎲󳎭󳎡󳏅󳏕󳏔󳎡󳏅󳏪󳏨󳏪󳏵󳏢󳏭
󳏑󳏰󳏸󳏦󳏳󳎡󳏄󳏰󳏯󳏴󳏶󳏮󳏱󳏵󳏪󳏰󳏯 󳎲󳎡󳏘󳏢󳏵󳏵󳎡󳎩󳏮󳏢󳏹󳏪󳏮󳏶󳏮󳎪
󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏰󳏳󳏴󳎡󳏕󳏳󳏢󳏯󳏴󳏮󳏪󳏵󳏵󳏦󳏳
󳏄󳏰󳏢󳏹󳏪󳏢󳏭󳎡󳏊󳏯󳏱󳏶󳏵
󳏕󳏰󳏴󳏭󳏪󳏯󳏬󳎡󳏐󳏱󳏵󳏪󳏤󳏢󳏭󳎡󳏊󳏯󳏱󳏶󳏵
󳏓󳏋󳎵󳎶󳎡󳏐󳏶󳏵󳏱󳏶󳏵
󳏑󳏰󳏸󳏦󳏳󳎡󳏋󳏢󳏤󳏬
󳏄󳏰󳏯󳏯󳏦󳏤󳏵󳏰󳏳󳏴󳎡󳏓󳏦󳏤󳏦󳏪󳏷󳏦󳏳
󳏄󳏰󳏢󳏹󳏪󳏢󳏭󳎡󳏐󳏶󳏵󳏱󳏶󳏵
󳏕󳏰󳏴󳏭󳏪󳏯󳏬󳎡󳏐󳏱󳏵󳏪󳏤󳏢󳏭󳎡󳏐󳏶󳏵󳏱󳏶󳏵
󳏓󳏋󳎵󳎶󳎡󳏊󳏯󳏱󳏶󳏵
󳏑󳏰󳏸󳏦󳏳󳎡󳏂󳏥󳏢󳏱󳏵󳏦󳏳 󳏐󳏶󳏵󳏱󳏶󳏵󳎻󳎡󳎶󳏗󳏅󳏄󳎡󳎰󳎡󳎲󳏂
󳏅󳏪󳏮󳏦󳏯󳏴󳏪󳏰󳏯󳏴󳎡󳎩󳏍󳎡󳏹󳎡󳏘󳎡󳏹󳎡󳏉󳎪 󳎳󳎯󳎵󳎣󳎡󳏹󳎡󳎲󳎯󳎹󳎣󳎡󳏹󳎡󳎱󳎯󳎸󳎣
󳏘󳏦󳏪󳏨󳏩󳏵 󳎲󳎶󳎱󳏨󳎡󳎩󳏱󳏢󳏪󳏳󳎪

10
Blank Page

11
Disclaimer
The product name and brand name may be
registered trademarks of related manufacturers.
TM and ® may be omitted on the user’s guide.
The pictures on the user’s guide are just for
reference, and there may be some slight
differences with the actual products.
We reserve the right to make changes without
prior notice to a product or system described
herein to improve reliability, function, or design.

Thank you for choosing gofanco
www.gofanco.com