gofanco HDExt User manual

50m HDMI Extender over Single Cat5e/6
with 3D Support
U er Manual
P/N: HDExt
G4-0032A

Thank you for purchasin from ofanco. Our products aim to meet all your
connectivity needs wherever you o. For optimum performance and safety, please
read the instructions carefully and keep this User's Guide for future reference. If you
need more information about our products, please visit www. ofanco.com. For
technical support, please email us at support@ ofanco.com. For drivers/manuals
download, please o to http://www. ofanco.com/download.
IMPORTANT SAFETY NOTICES
Please read safety instructions carefully before installation and operation.
Please pay close attention to all warnin s and hints for this device
Do not expose this unit to rain, heavy moisture, or liquid
Do not put any items into the device or attempt to modify its operation
Do not repair the device or open the enclosure without professional
uidance to avoid electric shocks. Doin so may void your warranty
Keep the product well-ventilated to avoid dama e from overheatin
Shut off power and make sure environment is safe before installation
Do not insert or remove the HDMI cables when the device is in use to
avoid cable dama e. Make sure they are plu ed into the correct
ports.
Use the included power adapters only. Make sure the specifications
match if usin 3rd-party DC power adapters
2

TABLE OF CONTENTS
Introduction .......................................................……....... 4
Features............................................................……….... 4
Packa e Contents..............................................………… 5
Installation Requirements..............................………........ 5
Product Description............................................………… 6
Hardware Installation ........................................……….... 8
Connection Dia ram .........................................………… 9
Specifications ............................................…………….... 10
3

PACKAGE CONTENTS
The followin items are necessary for the correct setup, use, and
maintenance of your HDMI extender:
●HDMI Transmitter (1 piece)
●HDMI Receiver (1 piece)
●Power adapters (2 pieces)
●User’s Manual (1 piece, this document)
●Mountin ears (4) & screws (8)
If any of the e item i mi ing, plea e contact either
gofanco or your vendor.
INSTALLATION REQUIREMENTS
1) HDMI source device (computer, DVD player, ame console,
etc. . .)
2) HDMI display device (SDTV/Monitor, HDTV/Monitor,
projector, etc. . .)
3) CAT5e/6 cable terminated at both ends with an RJ45
connector
5

PRODUCT DESCRIPTION
Transmitter Unit
1) Statu LED: Indicates the state of the si nal connection
2) HDMI input port: Receives the HDMI si nal to be
transmitted
3) EDID copy button: Retrieves the EDID information from
the display
4) CAT-5e/6 output: Connect one end of the Cat5e/6 cable to
this port
5) Power input: This is where the transmitter receives power
from the 5V DC power supply
6

Receiver Unit
1) Statu LED: This LED li hts when the receiver is
connected to the transmitter via the Cat5e/6 cable
2) HDMI output port: Recreates the ori inal HDMI si nal
3) Power LED: Indicates whether the receiver is powered on
4) CAT-5E/6 input: Connect one end of the Cat5e/6 cable to
this port
5) Power input: This is where the receiver is supplied power
from the 5V DC power supply
7

HARDWARE INSTALLATION
1) Power off all devices includin your HDMI source and HDMI
display.
2) Connect your HDMI source device to the Transmitter's
HDMI Input connector with an HDMI cable (HDMI cable not
included).
3) Plu your CAT5e/6 cable between the Transmitter's RJ45
Output and the Receiver's RJ45 Input.
4) Connect your HDMI display to the Receiver's HDMI ouput
connector with an HDMI cable (HDMI cable not included).
5) Plu the included power adapters into the Transmitter's and
Receiver's power jacks (labeled “DC/5V”), then plu both
power adapters into a reliable electrical socket.
6) Power on the HDMI source and display devices.
7) The HDMI extender is ready for use.
ATTENTION: Insert and remove cables ently. When insertin
the Cat5e or Cat6 cable, stop insertin when you hear the “click”
sound. To unplu the Cat5e or Cat6 cable, press down on the
lockin tab and pull the cable out.
8

CONNECTION DIAGRAM
*Note: If the sink (e. . HD TV) can’t display any si nal, try this.
Connect the TV/display directly to the Transmitter’s HDMI Input,
plu in the Transmitter’s power adapter, then press the
transmitter’s “EDID” button. The “Status” li ht will then flash,
which indicates that the EDID data has been copied from the
display device successfully. Holdin down the “EDID” button for 3
seconds will reset the EDID on the transmitter back to its default.
9

SPECIFICATIONS
Operatin Temperature Ran e -5℃ to +35℃ (+23℉ to +95℉)
Operatin Humidity Ran e
5 to 90%RH (Non-Condensin )
Input Video Si nal
0.5-1.0 Volts P-P
Input DDC Si nal
5 volts p-p(TTL)
Support Video Formats
576i, 480P, 576P, 720P, 1080i, 1080P
3D video①
Video Output
HDMI
Support Audio Format DTS-HDTM Master Audio, Dolby TrueHDTM
Transmission Distance 50m (Maximum) for 1080P over a sin le
Cat5e or Cat6 cable with solid 24AWG wire
Power consumption
5 watts (Maximum)
Dimension (L×W×H) Both the Transmitter and Receiver are
83x48x25mm
Net Wei ht
250 (Pair)
①Sink mu t upport 3D video when the ource i a 3D device
10