Goji GINMBT19 User manual

Wireless
Mono Headset
Instruction Manual
GINMBT19

Contents
Safety Warnings...............................................................4
Unpacking........................................................................6
Product Overview............................................................7
Charging the Battery.......................................................8
Switching On/O .............................................................9
Bluetooth Pairing ..........................................................10
Operation .......................................................................11
Reset the Headphones ..................................................12
Hints and Tips.................................................................12
Specications.................................................................13

4
Safety Warnings
• For trac safety, do not use earphones while driving
or cycling.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any
doubt about it working normally, or if it is damaged in
any way - switch o, unplug from the mains socket and
consult your dealer.
Temperature
• Avoid extreme degrees of temperature, either hot or
cold. Place the unit well away from heat sources such as
radiators or gas / electric res.
• Avoid exposure to direct sunlight and other sources
of heat.
• Charge battery in a place where the temperature is
between 5° and 40°C.
Naked Flames
• Never place any type of candle or naked ame on the
top of or near the unit.
Interference
• Do not place the unit on or near appliances which may
cause electromagnetic interference. If you do, it may
adversely aect the working performance of the unit,
and cause a distorted sound.

5
Earphones
• Listening to loud sounds for prolonged periods
of time may permanently damage your hearing.
• Before putting on earphones, turn the volume
down then put the earphones on and slowly
increase the volume until you reach a comfortable
listening level.

6
Thank you for purchasing your new
product.
We recommend that you spend some time
reading this instruction manual in order that you
fully understand all the operational features it
oers. You will also nd some hints and tips to
help you resolve any issues.
Read all the safety instructions carefully before
use and keep this instruction manual for future
reference.
Unpacking
Remove all items from the packaging. Retain the
packaging. If you dispose of it please do so according
to local regulations.
The following items are included:
• Main Unit
• USB Charging Cable
• Ear Hook
• Instruction Manual

7
1. button
• Switch the earphone
on/o
• Multi-functional
2. Charger connector
3. Status indicator
4. button
• Increase volume
• Go to next track
5. button
• Decrease volume
• Go to previous track
6. Microphone
Product Overview
1 32
654

8
Charging the Battery
When using the unit for the rst time, charge it fully
rst.
1. Connect the USB charging cable to the earphone.
2. Connect the other end of the USB charging cable to
a powered USB device.
Status LED Indicator
Low battery The red indicator will blink twice
periodically.
Charging The indicator will light up red.
Fully charged The indicator will light up blue.
Charge the battery if the earphone
performance is slow or intermittent.

9
Switching On/O
To switch on, press and hold for about 3 seconds
until the indicator ashes in purple.
• If the earphone is already paired with a Bluetooth
device before, it will automatically connect with the
last paired device when both are in pairing mode.
To switch o, press and hold for about 5 seconds
until the indicator ashes in purple, and then it will
switch o.

10
Bluetooth Pairing
You may increase/decrease the volume of the
connected device for desired volume level.
1. Ensure the earphone is switched o.
2. Press and hold for 5 seconds to enter Bluetooth
pair mode. The red and blue indicator starts ashing
rapidly and alternately.
If no Bluetooth device is paired in about
2.5 minutes, the earphone will switch
into Standby mode, and then switch o
automatically after another 6 minutes.
3. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select “GINMBT19”.
4. If necessary, enter the passcode, “0000”, to pair and
connect the earphone. Some device also ask to
conrm the headset connection after paring.
5. The blue indicator will blink and the earphone will
voice prompt after you have successfully paired the
earphone.