Goji Skyrider Blue GKIDBTB18 User manual

Skyrider Blue
Kids Headphones
Instruction Manual
GKIDBTB18 / GKIDBTP18

Contents
Safety Warnings...............................................................4
Unpacking........................................................................6
Product Overview............................................................7
Charging the Battery.......................................................8
Switching On/O .............................................................9
Bluetooth Pairing ..........................................................10
Operation .......................................................................11
Reset the Headphones ..................................................12
Hints and Tips.................................................................12
Specications.................................................................13

4
Safety Warnings
• For trac safety, do not use earphones while driving
or cycling.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any
doubt about it working normally, or if it is damaged in
any way - switch o, unplug from the mains socket and
consult your dealer.
Temperature
• Avoid extreme degrees of temperature, either hot or
cold. Place the unit well away from heat sources such as
radiators or gas / electric res.
• Avoid exposure to direct sunlight and other sources
of heat.
Naked Flames
• Never place any type of candle or naked ame on the
top of or near the unit.
Interference
• Do not place the unit on or near appliances which may
cause electromagnetic interference. If you do, it may
adversely aect the working performance of the unit,
and cause a distorted sound.

5
Earphones
• Listening to loud sounds for prolonged periods
of time may permanently damage your hearing.
• Before putting on earphones, turn the volume
down then put the earphones on and slowly
increase the volume until you reach a comfortable
listening level.

6
Thank you for purchasing your new
product.
We recommend that you spend some time
reading this instruction manual in order that you
fully understand all the operational features it
oers. You will also nd some hints and tips to
help you resolve any issues.
Read all the safety instructions carefully before
use and keep this instruction manual for future
reference.
Unpacking
Remove all items from the packaging. Retain the
packaging. If you dispose of it please do so according
to local regulations.
The following items are included:
• Main Unit
• USB Charging Cable
• 3.5mm Audio Cable
• Instruction Manual

7
1. button
• Increase volume
• Go to next track
2. button
• Decrease volume
• Go to previous track
3. Charger connector
4. Status indicator
5. button
• Switch the
earphones on/o
• Multi-functional
6. Audio socket
Connect the 3.5mm
audio cable with
music players or
mobile phones.
7. Microphone
8. Mute button
Product Overview
1
2
3
4
5
6
7
8

8
Charging the Battery
When using the unit for the rst time, charge it fully
rst.
1. Connect the USB charging cable to the earphones.
2. Connect the other end of the USB charging cable to
a powered USB device.
Status Battery Indicator
Low battery The red indicator will flash slowly.
Charging The red indicator will light up.
Fully charged The blue indicator will light up.

9
Switching On/O
To switch on, press and hold until the status indicator
lights up.
• If the earphones are already paired with a Bluetooth
device before, it will automatically connect with the
last paired device when both are in pairing mode.
To switch o, press and hold until the status indicator
lights up for few seconds.

10
3. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select “GKIDBTB18”
or “GKIDBTP18”.
4. If necessary, enter the passcode,“0000”, to pair and
connect the earphones. Some device also ask to
conrm the headset connection after paring.
5. The blue indicator will blink and the earphones
will beep after you have successfully paired the
earphones.
The Bluetooth feature and microphone
function will disable while using the 3.5mm
audio cable.
If no Bluetooth device is paired within
5 minutes, the headphones will switch o.
Bluetooth Pairing
1. Ensure the earphones is switched o.
2. Press and hold for 5 seconds to enter Bluetooth
pair mode. The red and blue indicator starts ashing
rapidly and alternately.