Goldair GCPF190 User manual

Operating Instructions
40cm Pedestal Fan with Remote
Model: GCPF190

General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been designed and
manufactured to high standards of engineering and with proper use and care, as described
in this leaflet, will give you years of useful service. Please read these instructions carefully
and keep them for future reference.
1. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
4. Ensure that the fan is switched off from the supply mains before removing the
guard.
5. Use only the voltage specified on the rating plate of the appliance.
6. Keep all objects at least 1 Metre from the front, sides and rear of the appliance
7. This appliance is intended for household use only and not for commercial or
industrial use.
8. Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or injury.
9. The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
10. Always unplug appliance when not in use.
11. When the appliance has been unpacked, check it for transport damage and ensure
all parts have been delivered. If parts are missing or the appliance has been
damaged, contact the Goldair Customer Services Team.
12. If your appliance does not work, or is not working properly, contact the place of
purchase. Repair work on the appliance by unqualified persons can cause serious
risk to the user.
13. Ensure hands are dry before handling the plug or the main unit.
14. Carry out regular checks of the supply cord to ensure no damage is evident.
15. Ensure that the cord is fully extended (not coiled) while in use.
16. Avoid contact with the moving parts. Keep hands, hair, clothing, away from blade
of the fan during operation to reduce the risk of injury to person and/or damage
to the unit.
17. Switch off and use handles provided when moving.
18. It is recommended that this fan is plugged directly into the wall socket.
19. A correctly specified, undamaged extension cord may be used with this fan
provided it is used in a safe manner.

General Care and Safety Guide
20. Never place appliance close to radiant heat source.
21. Never operate in areas where petrol, paint or other flammable liquids are used or
stored.
22. Never use the appliance to dry clothes.
23. Never insert or allow foreign objects to enter any ventilation or exhaust opening,
as this may cause an electric shock, fire or damage to the appliance.
24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth
(not wet) rinsed in hot soapy water only. Always remove plug from the mains
supply before cleaning.
25. Never connect the appliance to mains supply until completely assembled and
adjusted.
26. Never remove plug from power socket until the appliance has been switched off.
27. Never remove plug from power socket by pulling cord –always grip plug.
28. Never twist, kink or wrap the cord around the appliance, as this may cause the
insulation to weaken and split. Always ensure that all cord has been removed from
any cord storage area and is unrolled before use.
29. Never use this appliance in the immediate surrounds of a bath, a shower, or a
swimming pool or other liquids. The appliance must not be immersed in any
liquids.
30. Due to the risk of injury, never use this appliance for any purpose other than its
intended use. This appliance is intended for use in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments; farm houses, by clients in hotels, motels, bed and breakfast type
environments and other residential type environments
31. Never use this appliance outdoors.
32. Never operate the appliance with a damaged cord or plug, after it malfunctions, or
if it has been damaged in any manner. Have the appliance checked and repaired
by a qualified electrician if repair is necessary.
33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire
hazards.

Components
1. Guard Centre Cap
2. Front Guard
3. Blade Nut
4. Blade
5. Rear Guard Lock
6. Rear Guard
7. Motor Shaft
8. Motor Back Housing
9. Motor Neck
10. Control Panel
11. Neck Back Housing
12. Fan Body Fixing Screw
13. Inner Pedestal Pipe
14. Outer Pedestal Pipe
15. Height Adjustment Knob
16. Base Cover
17/18. Cross Base

WARNING: The fan should not be connected to the power mains during
assembly
Assembly
A Direction of rotation
B Height adjustment lock
C Base cover
D Outer stand pole
E 4 screws
F Base Feet
G Caps
•Assembly the cross feet (F) across and place the stand
outer pipe (D) upon the feet and fix it with the 4
screws provided.
•Loosen and remove stand pipe knob (B) and pull the
base cover (C) over the stand outer pipe (D).
•Let the base cover (C) slide over the mounted feet.
•If the caps from the feet are not mounted, please
attach them.
•Pull the inner pipe till the end out of the stand outer
pipe (D) and slide the stand pipe knob (B) over the
inner pipe onto lower metal pipe and tighten.
•Loosen stand pipe knob (17). Then adjust the pipe to
the desired height and then re-tighten the adjustment
knob.
•Loosen the fan body fixing knob (14) by turning into
the left.
•Place the switch box into the stand inner pipe (15).
•Turn the fan body fixed knob (14) clockwise and
tighten firmly.
•Fix the back guard (6) onto the motor shaft (8) till to
the motor front cover (7) ,Then screw the guard lock
(5) tighten in clockwise direction.
•Insert the Blade (4) onto the Motor shaft (8).
•Tighten the Blade with the Blade spinner (3) firmly in
clockwise direction.
•Mount front guard (2) onto the back guard (6) with the
locking screw. Fix both grilles with the clips spread
onto the edge of the guard equably, then use a
screwdriver to tighten the locking screw firmly.

Operating your Fan
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
WARNING:Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
Place the fan on a dry, level and sturdy surface.
Check that the fan control switch is set to the off position before plugging into the mains supply.
Speed control
The fan is controlled by touching the ‘ON/Speed’ button on the fan control box or remote
control. Touch the button once to turn the fan ON and it will operate at low speed.
Touching it a second time for medium speed and the third time for high speed.
Turn off the fan by touching the ‘OFF’ button.
Timer
This function is available by touching the ‘TIMER’ button on the control box or remote control.
You can set the amount of time before the fan will automatically switch off.
The settings are from 0.5 hour, 1 hour, 2 hours or 4 hours.
Wind Mode
There are 3 types of wind mode (Normal, Natural or Sleep).
Touch the ‘MODE’ button to change the wind mode.

Operating your Fan
REMOTE CONTROL
The remote requires a line-of-sight path to allow for the signal to be received by the unit.
Position the unit so the receiver lens is visible from the remote control.
The symbols on the remote correspond to the symbols on the main unit.
The remote control supplied with this fan uses 2 x AAA batteries. (Not supplied)

Cleaning
The fan requires regular cleaning to ensure trouble free operation.
Ensure that the fan is switched off from the supply mains before removing the guard.
Unplug the fan from the mains supply before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Ensure the fan is dry before plugging back into the mains supply.
Do not attempt to dismantle the fan. There are no user serviceable parts. For service
or repair, contact an authorised electrical service technician.
SUPPORT AND TECHNICAL ADVICE
Goldair –New Zealand
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
Goldair –Australia
Monday –Friday 8am-5pm
Phone [phone]
Phone [phone]
[email protected]
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in normal
domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the
warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone
other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to
the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).
One Year Warranty
Goldair One Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair –New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone [phone]
Phone [phone]
www.goldair.co.nz
Goldair –Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone [phone]
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au

New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au