Goldair GT302 User manual

GT302: 220-240V ~, 50Hz, 900W, Stainless Steel Toaster
Stainless Steel Toaster
Model GT302
OPERATING INSTRUCTIONS

GENERAL CARE AND SAFETY GUIDE
Please read all instructions carefully before using this appliance and keep them for
future reference.
Thank you for choosing a Goldair electric toaster. This Goldair appliance has been
designed and manufactured to a high standard of engineering and with proper use
and care, as described in this leaflet, will give you years of useful service. Please
read these instructions carefully.
ALWAYS
✔Always ensure hands are dry before
handling the plug or switching on the toaster.
✔Always use the toaster on a secure, dry,
level surface.
✔Always allow adequate air space above and
on all sides for air circulation. Do not allow the
toaster to touch curtains, wall coverings,
clothing, dishtowels or other flammable
materials during use. Do not use under
cupboards or curtains.
✔Caution is required on surfaces where heat
may cause a problem – an insulated heat pad
is recommended.
✔Always use the toaster with the crumb tray
in place.
✔Clean the crumb tray regularly. Do not allow
crumbs to build up.
✔Always unplug from the socket when not in
use and before cleaning.
✔Always allow the toaster to cool before
cleaning and storing.
✔Carry out regular checks of the supply cord
to ensure no damage is evident.
✔Return the toaster after a malfunction, or if
it has been damaged in any manner to an
authorised electrician for examination, repair
or adjustment as special purpose tools are
required.
NEVER
✘Never touch hot surfaces.
✘Never use this appliance outdoors.
✘Never use this appliance for any purpose
other than its intended use. This appliance is
for household use only.
✘This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge, unless they
are supervised or have been given instruction
concerning the use of the toaster by a person
responsible for their safety.
✘Close supervision is necessary when the
appliance is near children.
✘Never leave the appliance unattended when
in use as bread may burn.
✘Never place this appliance on or near a hot
gas or electric burner or where it could touch
a heated oven or microwave oven.
✘Never use this appliance with any foodstuff
containing sugar or products containing jam
or preserves.
✘Never immerse any part of the toaster, or
cord set and plug in water or any other liquid
to protect against electrical hazards.
✘Never use harsh, abrasive or caustic
cleaners to clean this appliance.
✘Never operate the appliance with a
damaged cord or plug, after it malfunctions,
or if it has been damaged in any manner.
✘The toaster is not intended to be operated by
means of an external timer or separate
remote-control system.
CAUTION: This appliance generates heat
during use. Proper precautions must be taken
to prevent the risk of burns, scalds, fires or
other damage to persons caused by touching
the exterior whilst in use
WARNING: The bread may burn, therefore do
not use the toaster near or below combustible
material, such as curtains.
WARNING: Never attempt to extract jammed
toast, or any other item with a knife or any
other object, as contact with live elements
could result in an electric shock. Allow the
appliance to cool, unplug and carefully turn the
toaster upside down and shake gently to
remove the bread.

COMPONENTS
Main Unit
OPERATING YOUR TOASTER
1. Position the toaster on a dry, stable level work surface, away from the edge. Ensure
that the cord does not over-hang the work surface as this is a hazard.
2. Insert the plug into a suitable power outlet, 230-240V.
3. Insert the bread, muffin or bagel into the bread slots.
4. Using the + or – buttons, select the desired browning setting; toasting settings
range from 1 (lightest) to 9 (darkest). When using the toaster for the first time,
select setting 4. Varying types of bread and personal preference may require a
different setting.
5. Press the carriage control lever down until it locks into place. The toasting cycle can
be stopped at any time by pressing the cancel button.
6. Remove the toast taking care not to touch any hot surfaces. In the unlikely event
that the bread or crumpet becomes jammed, switch the toaster off at the power
outlet and disconnect the plug. Allow the toaster to cool fully before carefully
turning the toaster upside down and shaking gently to remove the jammed items
ensuring that you do not damage the element. Never insert your hands or any hard
or sharp instrument into the slots.
7. If the toast starts to smoke before it has popped up, stop the toasting process by
pressing the cancel button.
8. The progress indicator lights will individually extinguish as the toasting cycle
progresses to indicate progress.
9. The reheat button is designed to reheat the toast without cooking it further.
A. Defrost button
B. Reheat Button
C. Cancel Button
D. Cooking Adjustment
A B
C
D
1. Bread slots
2. Carriage handle with roll warmer & High Lift
3. Control panel
4. Crumb tray
2
1
3
4

VARIABLE BROWNING CONTROLS
1. The browning control varies the time the bread is toasted.
2. The control can be set from 1 to 9, where 1 is the shortest time (lightest toast) and 9
is the longest time (darkest toast).
3. Remember to increase the browning control setting for subsequent operations.
4. If the toast is too dark, reduce the browning control before toasting the next slice.
5. Dry or thin slices will toast quicker than moist or thick slices, so use a lower
browning control setting.
6. When toasting two slices at the same time, try to use the same size and consistency
of bread to achieve equal browning.
7. The defrost button is designed to first defrost, then toast the bread. This will extend
the toasting cycle slightly.
8. Set the variable browning control to the desired position:
• Setting 1-3: refrigerated breads and thinner frozen items such as frozen
pancakes.
• Setting 3-6: pastries, frozen waffles, thin French toast and refrigerated
bagels.
• Setting 7-9: Thicker frozen items such as bagels or hand cut bread.
9. Press the bread carriage lever down until it locks into position, then press the
defrost button so the red light illuminates.
10. When the cycle is complete the bread carriage will raise the toast up. If you wish to
stop the defrosting before it is finished, simply press the cancel button.

TOASTING TIPS
Toasting is a combination of cooking and drying the bread. Moisture levels differ from
one bread to another, which can result in varying toasting times.
For slightly dry bread, use a lower setting than normal. For fresh bread or whole wheat,
use a higher setting than normal.
Breads with very uneven surfaces (such as English muffins) will require a higher setting.
Thickly cut pieces of bread (including bagels) will take longer to toast. Very thick pieces
may require two cycles.
When toasting raisin or other fruit breads, remove any loose raisins from the surface of
the bread before placing into the toaster to prevent pieces falling into the toaster or
sticking on the guard wire in the slot.
Before toasting bagels, slice each bagel into two equal halves.
If you are toasting a single slice of bread, select a lighter setting than normal to avoid
over toasting. The toaster is designed to heat the whole toasting chamber for two slices.
Frozen breads, i.e. waffles and bagels should be warmed using the defrost button.
Exercise caution when toasting pastries. The filling can become quite hot, long before
the surface of the pastry becomes brown.
CARE AND CLEANING
Unplug the toaster from the power outlet and allow to cool before cleaning.
Do not use abrasive cleansers. Simply wipe the exterior with a clean damp cloth and dry
thoroughly. Apply any cleaning agent to a cloth, not directly onto the toaster.
To remove crumbs slide out the crumb tray and discard crumbs. Wipe clean and replace.
Never operate the toaster without the crumb tray in place.
To remove any pieces of bread remaining in the toaster, turn the toaster upside down
and shake gently. Never insert any hard or sharp instrument into the slots as this could
damage the toaster and cause a safety hazard.
Never wrap the cord around the outside of the toaster, use the cord storage cleats on the
underside of the toaster.
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday – Friday 8am-5pm
Phone: [phone]
Website: www.goldair.co.nz

Your Goldair product has been inspected and tested and is guaranteed subject to the
following for a period to two years from the date of purchase against defects in
workmanship and materials. During this period, such defects will be rectified by
repair or replacement of the product purchased. Your product contains no user
serviceable components and this warranty becomes invalid if in our opinion the
product has been misused, abused, incorrectly installed, tampered with, connected
to an electrical supply not corresponding with the name plate specification, or
subjected to power surges. The warranty does not include any labour or other
associated expense that may be involved in removal or installation of the product.
Normal wear and tear is expressly excluded.
If your Goldair product fails to operate satisfactorily, please return it to the retailer
from whom it was purchased. To obtain a repair or replacement product under this
warranty, you will need to produce satisfactory evidence of date of purchase. The
completed warranty and purchase receipt must be presented with the product. The
warranty should be filled out at the time of purchase. It is in your interest to make
sure this is done.
If the product is to be replaced (cannot be repaired) then that replacement will be of
the same or similar product or accessory excluding packaging, instruction card etc.
Where a replacement product is supplied, this shall be guaranteed for the balance of
the original warranty period.
Any model that is no longer available will be replaced by a model of a value and with
such features as we consider appropriate in the circumstances. Goldair Ltd is not
responsible for freight forwarding charges, losses or damage in transit.
If service is required after the warranty period has expired, the product should be
returned to a qualified electrical technician. Service outside of the warranty period
will be at your cost.
Consumers Guarantee Act (1993).
In accordance with the above act consumers are advised that: The manufacturer
does not undertake that repair facilities and parts are necessarily available for this
product.
If any of the provisions of the foregoing are contrary to any relevant legislation, then
that provision shall be deemed to be excluded from the warranty and the rest of the
provisions will continue to apply.
TWO YEAR WARRANTY
IMPORTANT: PLEASE RETAIN THIS WARRANTY CARD
NAME:
ADDRESS:
PURCHASED FROM:
SUBURB:
DATE OF PURCHASE:
NAME OF PRODUCT:
MODEL No: .