Goldline BioCam 2.0 User manual

VIDEO OTOSCOPE USER MANUAL

i
Contents
1 INTRODUCTION
Welcome Page 3
Warranty Information Page 4
Cautions Page 5
Warnings Page 6
Specications Page 7
BioCam2.0 Parts Page 8
2 GETTING STARTED
How to Install the BioCam2.0 Software Page 9
How to Remove the BioCam2.0 Software Page 15
Connecting and Using the Device Page 16
Using the Freeze Button and the Focus Dial Page 17
3USING THE BIOCAM2.0TM
Capturing Images Page 18
Recording Video Page 
Page 1 | VIDEO OTOSCOPE USER MANUAL

1
Introduction
Welcome
Thank you for purchasing the BioCam2.0TM video otoscope. This revolutionary
device brings clinical diagnosis to a whole new level. You can capture high
resolution images and record video to enable more accurate diagnosis as well
as keep better track of the patient’s progress.
This guide explains the device, how to install the BioCam software and how to
use the BioCam2.0TM.
The Biocam 2.0TM is a digital otoscope with a USB video cable. Included with the
BioCam2.0TM are three interchangeable speculums as well as a USB video cable
designed for easy plug and play operation.
The BioCam2.0TM is compatible with any type of video display devices with USB
2.0 ports and Windows OS platform. The operation of this device is supported
by the BioCam2.0TM Video Otoscope System software.
System Requirements
Runs on Windows XP or later operating system
USB 2.0 port
Viewing monitor
Intended Use
The BioCam2.0TM is capable of being used for multiple diagnosis such as skin
lesions, dental tartar, ear infection and more.
User Prole
Can be operated by any trained professional.
Warranty Information
Please register your BioCam2.0TM at www.goldlinebiocam.com within a
month from the date of purchase to be eligible for our limited parts and labor
warranty
Page 3 | VIDEO OTOSCOPE USER MANUAL

1
Introduction
Warranty Information
BioCam2.0TM One Year Limited Warranty Protection
A BioCam2.0TM purchased new from Goldline or any Goldline authorized
distributor is warranted to be free from original defects in the material and
workmanship under normal use and service for the period of one year from the
purchase date from Goldline.
Goldline will repair or replace any defected BioCam2.0TM device under the
terms of this warranty.
Goldline will not be responsible for loss associated with the use of any
BioCam2.0TM that :
(1) Has had serial number defaced
(2) Has been repaired by anyone other than Goldline
(3) Has been altered, or
(4) Has been used in a manner other than in accordance with this manual.
Please register your BioCam2.0TM online at www.goldlinebiocam.com within
30 days from the date of purchase to be eligible for our limited warranty. Those
registering after 30 days from the date of purchase will not be entitled to any
warranty protection.
Page 4 | VIDEO OTOSCOPE USER MANUAL

1
Introduction
Cautions
1. In order to obtain optimum performance and ensure patient safety, please
read this instruction manual thoroughly.
2. Do not use Biocam2.0TM if you notice any signs of damage or malfunction and
contact a Goldline customer service representative immediately.
3. Other than speculum attachments, do not disinfect Biocam2.0TM by using
oxide gas, steam or any liquid disinfectant.
4. This product complies with current required standards for electromagnetic
interference and should not present any complications to other equipment or
devices. Avoid using this device in close proximity of other equipment.
5. Do not connect BioCam2.0TM before you complete the BioCam2.0TM Video
Otoscope System software installation on your system.
6. Check for USB 2.0 compatibility prior to installation and usage.
7. Usage of multiple USB ports may cause conict in your system.
8. Keep out of reach of children. Only to be used by trained personnel.
9. Please turn o all running programs before installing the BioCam2.0TM
software.
Page 5 | VIDEO OTOSCOPE USER MANUAL
!

1
Introduction
Warranty Information
2. Do not use any other attachments other than the attachments
designed by Goldline exclusively for the BioCam2.0TM.
3. Use caution when inserting speculum into the ear canal.
Page 6 | VIDEO OTOSCOPE USER MANUAL

1
Introduction
Specications
Page 7 | VIDEO OTOSCOPE USER MANUAL
Parameter
Optical Format
Sensor Resolution
Eective Pixels
Camera Function
Sensor Pixel Size
Typical Value
1/4.5 inch VGA CMOS
660HX507V, 334,620 pixel
640Hx480V,307,200 pixel
Live & capture, record, focus
3.6 μm x 3.6 μm
Quad VGA
XGA
SVGA
VGA
CIF
QVGA
1280H x 960V, 15fps, USB 2.0 only [interpolation]
1024H x 768V, 15fps, USB 2.0 only [interpolation]
800H x 600V, 15fps, USB 2.0 only [interpolation]
640H x 480V, 30 fps
352H x 288V, 30fps
320H x 240V, 30fps
RESOLUTIONCAMERA
Lighting
Supply Voltage
6EA White LED
5.0V, USB

Introduction
BioCam2.0TM Parts
Page 8 | VIDEO OTOSCOPE USER MANUAL
The BioCam2.0TM is simple and ergonomically designed to optimize functional-
ity and make video capture simpler and more accurate. It is lightweight and
easy to operate. This device only accepts BioCam2.0TM speculums from Goldline.
Focus Dial
Power Switch
USB 2.0
Freeze button
Speculum Nozzle
Grip Handle
Focus Dial
To focus the image or video.
Power Switch
Turn on/ o the video otoscope.
Grip Handle
For comfort and stable handling of
the video otoscope.
Speculum Nozzle
Only accepts BioCam2.0TM speculums.
Freeze Button
For video record and image capture.
USB 2.0
Compatible with any USB 2.0 ports.

2
Getting Started
How to Install the BioCam2.0TM Software
1. Insert CD into your computer CD player.
The windows below will automatically open.
2. Double click on the AMCap-BioCam2.0 icon to start the installation.
3. Click Next
Page 9 | VIDEO OTOSCOPE USER MANUAL

2
Getting Started
How to Install the BioCam2.0TM Software
Page 10 | VIDEO OTOSCOPE USER MANUAL
4. Choose your destination folder and click Next
5. Click Next