Goodvb GD-BW09 User manual

User Manual
Thank you for purchasing Goodvb GD-BW09 RGBW Smart LED Bulb. Please kindly read
the user manual before using and keep it handy for further reference. If you have any
additional questions or comments, please contact us by email at: [e-mail] .
Specifications
Model
GD-BW09
Lamp color
Milky
Base type
E27 (EU) / E26 (US)
Material
Aluminum + plastic + glass
Light color
RGB + Dimmable White
Power
9W
Wireless frequency
WiFi IEEE 802.11 b/g/n 2.4GHz
Lifespan
20000 hours
Color temperature
2700 - 6500K
Luminous
800lm
Luminous angle
270-degree
Working temperature
-25 - 45 °C
LED quantity
2835/24pcs, RGB5050/6pcs
Communication protocol
Wi-Fi, Amazon Alexa, Google Assistant
Range
50m (outdoor), 20m (indoor)
Features
Smart Control
Voice Control
16 million RGB Adjustable Brightness
Adjustable Color Temperature
Energy Saving

No Hub Required
Timer Setting
Installation
Install the Light Bulb
Install the light bulb and turn on the power.
Note:
1. Please make sure that the power is off when install, remove or examine the
light bulb.
2. Please do not install the bulb to dimmable appliances (e.g. a desk lamp with
dimmer switch) to avoid any damages of the product.
3. Please do not use the bulb in a damp environment.
4. Do not use the light bulb in a narrow and ill-ventilated shade as it may cause
weak signals or heat dissipation issues.
Download the App
Search SCHEDIT in App store to download it.
Use the App
Open the App and operate it in accordance with the instructions provided in the App.
Please confirm that the Wi-Fi network is available and is able to access the Internet
properly.

How to Restore to Factory Settings
Turn on and off the light bulb for 5 times, and hold for 2 seconds in each ON and OFF.
For the 5th time, hold the ON mode for about 5 seconds. If the light blinks, it means
that the light bulb is restored successfully.
List of Performance Failure
1. The light bulb is not working when powered on.
2. The light bulb blinks abnormally.
3. Color missing or can’t change colors.
4. The light bulb is not able to connect to the App under right internet connection.
5. A non-human factor (structure damage) that affects the using of the light bulb or
some safety abnormality.
Safety Warning
1. Please confirm the working voltage before using this product. The use of
inappropriate voltage may cause damage to the product and security risks.
2. Please do not disassemble the product, as the light diodes can cause damage to
the eyes.
3. Disconnect power before installation to prevent the risk of electric shock.
4. Do not clean the light bulb when it is on and or connected to the light socket.
5. The light bulb will heat up when working. Do not use it in a confined holder for an
extended period of time. Ensure sufficient ventilation for the light bulb to allow
for heat dissipation.
6. Do not place in reach of children.
7. For indoor use only.
8. Use in dry locations only.
9. The light source of this product is irreplaceable light diodes (LED).
10. This device is neither intended for use with emergency exits nor intended for
emergency lighting.

11. Only use the controller provided with or specified by the instructions to control
the light bulb. Please do not use any dimmable appliances to operate it to avoid
any damages of the product.
WARRANTY INFORMATION
Your ‘Goodvb GD-BW09 RGBW Smart LED Bulb’, is warranted to the original owner for
12 months from the date of purchase against defects in material and workmanship
under normal use and service. Should your light bulb prove defective within 12
months from the date of purchase, return the defective part or unit, freight prepaid
along with an explanation of the claim. Please pack your light bulb carefully to avoid
damages in transit. Under this warranty, Goodvb will repair or replace any parts found
to be defective due to manufacturer's defect. This warranty extends only to personal
use and does not extend to any product that has been used for commercial use,
rental use, or use which is not intended. There are no warranties other than that
expressly set forth herein. This warranty is not transferable. Goodvb is not responsible
in any way for damages, losses or inconveniences caused by equipment failure or
user negligence, abuse, or use not in accordance with the ‘User Manual’ or any
additional safety, use, or warnings included in the product materials. Further, Goodvb
is not liable for incidental or consequential damages of any nature resulting from the
use of this product and any liability shall not exceed the purchase price of the
product.
This warranty gives you specific legal rights. You may also have other rights which
vary from state to state.
THIS WARRANTY DOES NOT APPLY TO THE FOLLOWING
Damage due to accident, misuse, abuse, alterations or vandalism.
Improper or inadequate maintenance.
Unauthorized modifications or commercial use.
Damage in return transit.

Unsupervised use by children under 18 years of age.
(Goodvb™ and its subsidiaries assume no liability for damage caused by the use of the
Goodvb GD-BW09 RGBW Smart Bulb other than for its intended use or as instructed
above in the User Manual.)
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co‐located for
operating in conjunction with any other antenna or transmitter.