Gooxi RMC1104-670-HS User manual

RMC1104-670-HS
User Manual
Version 1.0

Shenzhen Gooxi Hengyu Technology Co., Ltd
Content
Manual Structure
Foreword
Chapter 1 Chassis Overview
Chapter 2 Easy Installation Instruction
Chapter 3 Chassis Parameters

Shenzhen Gooxi Hengyu Technology Co., Ltd
Foreword
This manual is about the installation and use information of RMC1104-670-HS
chassis that provided to professional system integrators and personal computer
technicians. The installation and maintenance should be conducted by experienced
technicians only.
Gooxi RMC1104-670-HS the fourth generation of server chassis is designed
based on standard 2U server and can be assembled into common computing server,
storage server, Internet bar server, database server, VOD storage server, HPC server,
and so on. The server chassis is different from ordinary desktop chassis that pays
more attention to appearance design, as it focuses on the quality and content. Gooxi
RMC1104-670-HS server chassis uses imported first-class SGCC galvanized steel,
and possessed with the characteristics of fingerprint resistance, corrosion resistance,
heat resistance, heat transfer and thermal reflectivity, formability as well as
weldability.
In addition, taking into account the higher stability requirements of the server
during usage, Gooxi RMC1104-670-HS server chassis has excellent heat dispersion.
To be specific, the heat dissipation channel is reasonably designed, which can take
away a large amount of heat in the chassis to ensure the stable operation of the server.
The scalability is an important factor to determine whether the server chassis
design is reasonable. Gooxi RMC1104-670-HS server chassis has stronger scalability
than ordinary chassis, such as: hard disk expander, peripheral expander, etc.

Shenzhen Gooxi Hengyu Technology Co., Ltd
Chapter 1 Chassis Overview
1.1 Chassis Structure
⑴Base
⑵Rear window
⑶Ventilation wall
⑷Hard disk module
⑸Front cover
⑹Top cover
⑺Handle
⑻Hard drive bracket
⑼Fan
1.2 Rear Window Construction
①Power site
②I/O washer position
③Expansion slot

Shenzhen Gooxi Hengyu Technology Co., Ltd
1.3 Materials Package
12 pieces of #6-32*5mm countersunk screws
are used for fixing hard disks and brackets.
10 pieces of active studs with the total height
of 8mm are used to install the motherboard.
16 pieces of
#6-32*6mm
cross
recessed pan
head screws
are used for
fastening the
motherboard
and power supply.
0～3 SAS - label.
One 100 * 120 * 0.045mm PE valve bag
1.4 Chassis View
Front view:
Missing picture
Rear view:
Missing picture
1.5 Related Indicators of Chassis Panel

Shenzhen Gooxi Hengyu Technology Co., Ltd
The above picture shows the front panel buttons and LED indicators; each button
or indicator light has its own function and status description that are described in the
following table:
LED Status Description
No.
Picture
LED Appearance
Description
1
The green light is on
The device is on
②
The yellow light is
on
Alarm indication,
including system alarm, fan
alarm, power alarm, etc.; the
specific can be viewed
through IPMI management
software
③
Green light flashes
The system is running
normally
④
Reset
The button is used to restart
the server
⑤
The green light is on
Internet access 1 connection
is normal
⑥
The green light is on
Internet access 2 connection
is normal

Shenzhen Gooxi Hengyu Technology Co., Ltd
⑦、 ⑧
USB interface
2*USB2.0 interface
1.6 Introduction to Hard Disk Indicator
1、Act LED
2、FaultLED
3、StatusLED
4、LED description is as follows：
Function
Act LED
Fault LED
Status LED
Hard disk at
site
ON
OFF
OFF
Hard disk
activity
Flash 4Hz/s
OFF
OFF
Hard disk
location
ON
Flash 4Hz/s
OFF
Hard disk
fault
ON
OFF
ON
RAID
reconstruction
ON
OFF
Flash 1Hz/s
1.7 Brief Introduction to Backplane
The standard configuration of Gooxi backplane model is RMC1104-BP-12G, and
the specific description is as follows:
ActLED
Fault LED
StatusLED

Shenzhen Gooxi Hengyu Technology Co., Ltd
RMC1104-BP-12G
Correspond
ing site
Interface / jumper / slot
Corresponding
site
Interface / jumper / slot
1、2、3、4
4 29PINSAS output
interfaces
7、8、9、10、11、12
Sockets of 4 temperature
control fans
5、6
2 ATX power input
13
1个SFF-8643 12Gb SAS
interface
14
CPLD decoding chip
1.8 Introduction to the Output Interface of Backplane Hard Disk

Shenzhen Gooxi Hengyu Technology Co., Ltd
Chapter 2 Easy Installation Instruction
2.1 Introduction to the Disassemble Steps of Gooxi 1104 Chassis Cover
⑴Unscrew the top cover screws
⑵Press the button of chassis back cover
⑶Push the back cover
(4) Pull the back cover

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.2 Introduction to the Insert and Plug Steps of Gooxi1104 Chassis Hard Disk
⑴Press the button to pull out the hard disk from the hard disk site.
(2) Install the 3.5-inch hard drive to the hard drive bracket according to screw holes,
as shown in the figure below.
(3) The installed hard disk is shown in the following figure:

Shenzhen Gooxi Hengyu Technology Co., Ltd
(4) Insert hard disk to the chassis, and close the switch. As shown in the following
figure.

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.3 Introduction to the Installation Steps of Gooxi1104 Chassis Fan
⑴Install 8 soft nails to the fan as shown in the figure below

Shenzhen Gooxi Hengyu Technology Co., Ltd
⑴Complete the insertion, respectively.
⑵The final installation effect：

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.4 Introduction to the Installation Steps of Motherboard on Gooxi 1104 Chassis
(1) Open the chassis, and place insulation pad according to the correct orientation.
Based on the hole of motherboard screw, motherboard active stud (8mm height) is
installed at the corresponding position on the insulation pad. As shown in the figure
below:

Shenzhen Gooxi Hengyu Technology Co., Ltd
(2) After the motherboard active stud (8mm height) is installed, place the motherboard
into the chassis and fasten motherboard screw at the hole site. As shown in the figure
below:

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.5 Introduction to the Installation Steps of Expanding Hard Disk on Gooxi 1104
Chassis
2.5.1 Installation Steps of Two 2.5-inch Non-Hot Swappable Hard Disks
(1) Remove the screws marked at the following figure, lift the top cover and remove it.
As shown in the figure below:
(2) Fix the two 2.5 inch hard disks with expandable bracket, respectively
(3) The final installation effect is as follows

Shenzhen Gooxi Hengyu Technology Co., Ltd
(4) Install the expandable hard disk to the chassis, as shown in the figure below:
(5)The final installation effect of expandable hard disk shown in the figure below

Shenzhen Gooxi Hengyu Technology Co., Ltd
(5) Restore the front cover when the expandable hard disk is finished installation

Shenzhen Gooxi Hengyu Technology Co., Ltd
Chapter 3 Chassis Parameters
Basic Parameters
Chassis style
Rack mount
Chassis structure
1U
Applicable motherboard
EEB(12*13)/CEB(12*10.5)/ATX(12*9.5)/Micro ATX
Supported motherboard
brands
Gooxi、Intel、ASUS、SuperMicro、TYAN、MSI、GIGABYTE, etc
Power type
Single charge and 1+1 redundant power
Number of supported
power supplies
1
SGP10
Support
Backplane
12Gb/s SAS data backplane
Supported
hot-swappable hard
drives
Supportive, compatible with SAS and SATA drives
Supported
hot-swappable hard fans
Support
Hard disk site
Four 3.5-inch (or 2.5-inch) non-hot-swappable hard disk sites; two
optional 2.5-inch non-hot-swappable expandable sites
Hard disk shockproof
system
Hard disk bracket is designed with EMI shrapnel. The unique
shockproof fan design can reduce the resonance between the fan and
hard disk without affecting the I/O speed of hard disks.
Cooling system
Five 4056 fans are the standard configuration
Windshield
Optional configuration
Intelligent control of
temperature
Support
Expanded card site
One full-height PCI-E expandable card site
Supported rails
Optional
Apparent Parameters
Front panel interface
2 USB, 1 on-off key, 1 restart key, 1 hard disk indicator, 1 system failure
light, 2 network indicators
Free screws dismantle
Support
Fixed mode of cabinet
Ordinary
Configuration parameters
Product material
Imported SGCC (galvanized steel sheet), ABS panel and punching net
Chassis dimension
640*433*43.5mmmm(Depth * width * height)
Chassis weight
7.3kg

Shenzhen Gooxi Hengyu Technology Co., Ltd
Package dimension
902*591*183mm(Length * width * height）
Overall gross weight
9.7KG
Safety certification
CE、FCC、RoHS
Note: This manual is a general instruction of RMC1104-670-HS series. Specific parameters of each
type please refer to the chassis detailed parameters.