Gooxi RMC2108-670-HS User manual

RMC2108-670-HS
User Manual
Version 1.0

Shenzhen Gooxi Hengyu Technology Co., Ltd
Content
Manual Structure
Foreword
Chapter 1 Chassis Overview
Chapter 2 Easy Installation Instruction
Chapter 3 Chassis Parameters

Shenzhen Gooxi Hengyu Technology Co., Ltd
Foreword
This manual is about the installation and use information of RMC2108-670-HS
chassis that provided to professional system integrators and personal computer
technicians. The installation and maintenance should be conducted by experienced
technicians only.
Gooxi RMC2108-670-HS the fourth generation of server chassis is designed
based on standard 2U server and can be assembled into common computing server,
storage server, Internet bar server, database server, VOD storage server, HPC server,
and so on. The server chassis is different from ordinary desktop chassis that pays
more attention to appearance design, as it focuses on the quality and content. Gooxi
RMC2108-670-HS server chassis uses imported first-class SGCC galvanized steel,
and possessed with the characteristics of fingerprint resistance, corrosion resistance,
heat resistance, heat transfer and thermal reflectivity, formability as well as
weldability.
In addition, taking into account the higher stability requirements of the server
during usage, Gooxi RMC2108-670-HS server chassis has excellent heat dispersion.
To be specific, the heat dissipation channel is reasonably designed, which can take
away a large amount of heat in the chassis to ensure the stable operation of the server.
The scalability is an important factor to determine whether the server chassis
design is reasonable. Gooxi RMC2108-670-HS server chassis has stronger scalability
than ordinary chassis, such as: hard disk expander, peripheral expander, etc.

Shenzhen Gooxi Hengyu Technology Co., Ltd
Chapter 1 Chassis Overview
1.1 Chassis Structure
⑴Base
⑵Rear window
⑶Ventilation wall
⑷Hard disk module
⑸Front cover
⑹Top cover
⑺Handle
⑻Hard drive bracket
⑼Fan
1.2 Rear Window Construction

Shenzhen Gooxi Hengyu Technology Co., Ltd
①Power site
②I/O washer position
③Expansion slot
1.3 Materials Package
32 pieces of #6-32*5mm countersunk screws are used for fixing hard disks.
10 pieces of active studs with the total height of 8mm are used to install the
motherboard.
16 pieces of #6-32*6mm cross recessed pan head screws are used for fastening
the motherboard and power supply.
0～7 SAS - label.
One 100 * 120 * 0.045mm PE valve bag.
1.4 Chassis View
Front view:

Shenzhen Gooxi Hengyu Technology Co., Ltd
Rear view:
1.5 Related Indicators of Chassis Panel
The above picture shows the front panel buttons and LED indicators; each button
or indicator light has its own function and status description that are described in the
following table:
LED Status Description
No.
Picture
LED Appearance
Description

Shenzhen Gooxi Hengyu Technology Co., Ltd
1
-
LOGO label (labeling or
customized acrylic label)
②
The green light is on
The device is on
③
Reset
The button is used to restart
the server
④
The green light
flashes
The system is running
normally
⑤
The yellow light is
on
Alarm indication,
including system alarm, fan
alarm, power alarm, etc.; the
specific can be viewed
through IPMI management
software
⑥
The green light is on
Internet access 1 connection
is normal
⑦
The green light is on
Internet access 2 connection
is normal
⑧
USB interface
2*USB2.0 interface
1.6 Introduction to Hard Disk Indicator
1、Act LED
2、FaultLED
3、StatusLED
4、LED description is as follows：
Function
Act LED
Fault LED
Status LED
Hard disk at
site
ON
OFF
OFF
ActLED
Fault LED
StatusLED

Shenzhen Gooxi Hengyu Technology Co., Ltd
Hard disk
activity
Flash 4Hz/s
OFF
OFF
Hard disk
location
ON
Flash 4Hz/s
OFF
Hard disk
fault
ON
OFF
ON
RAID
reconstruction
ON
OFF
Flash 1Hz/s
1.7 Brief Introduction to Backplane
The standard configuration of Gooxi backplane model is RMC2108-BP-12G, and
the specific description is as follows:
RMC2108-BP-12G
Correspo
nding
site
Interface / jumper / slot
Corresponding
site
Interface / jumper / slot
1、2
2 ATX power input
5、6、7、8
Sockets of 4 temperature control
fans
3、4
SFF-8643 12Gb SAS
interface
1.8 Introduction to the Output Interface of Backplane Hard Disk

Shenzhen Gooxi Hengyu Technology Co., Ltd
Chapter 2 Easy Installation Instruction
2.1 Introduction to the Disassemble Steps of Gooxi 2108 Chassis Cover
⑴Unscrew the top cover screws
⑵Press the button of chassis back cover
⑶Push the back cover

Shenzhen Gooxi Hengyu Technology Co., Ltd
(4) Pull the back cover
2.2 Introduction to the Insert and Plug Steps of Gooxi2108 Chassis Hard Disk
⑴Press the button to pull out the hard disk from the hard disk site.
(2) Install the 3.5-inch hard drive to the hard drive bracket according to screw holes,
as shown in the figure below.

Shenzhen Gooxi Hengyu Technology Co., Ltd
(3) The installed hard disk is shown in the following figure:
(4) Insert hard disk to the chassis, and close the switch. As shown in the following
figure.

Shenzhen Gooxi Hengyu Technology Co., Ltd

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.3 Introduction to the Installation Steps of Gooxi2108 Chassis Power Supply
(1) Place the power supply case to the chassis according to the hole site, as shown in
the figure below
(2) Install the power to the chassis according to the correct position, and then screw
on the power supply screws at the position marked below.
(3) Fix the power supply bracket, and screw on the screws at the position marked in

Shenzhen Gooxi Hengyu Technology Co., Ltd
the figure below.
(4) Insert the hot-swappable power modules PSU1 and PSU2, respectively
(5) The final installation effect of power supply.

Shenzhen Gooxi Hengyu Technology Co., Ltd
2.4 Introduction to the Installation Steps of Motherboard on Gooxi 2108 Chassis
(1) Open the chassis, and place insulation pad according to the correct orientation.
Based on the hole of motherboard screw, motherboard active stud (8mm height) is
installed at the corresponding position on the insulation pad. As shown in the figure
below:
(2) After the motherboard active stud (8mm height) is installed, place the motherboard
into the chassis and fasten motherboard screw at the hole site. As shown in the figure

Shenzhen Gooxi Hengyu Technology Co., Ltd
below:
2.5 Introduction to the Installation Steps of Expanding Hard Disk on Gooxi 2108
Chassis
2.5.1 Installation Steps of Two 2.5-inch Non-Hot Swappable Hard Disks
(1) Remove the screws marked at the following figure, lift the top cover and remove it.
As shown in the figure below:

Shenzhen Gooxi Hengyu Technology Co., Ltd
(2) Fix the two 2.5 inch hard disks with expandable bracket, respectively
(3) The final installation effect is as follows
(4) Install the expandable hard disk to the chassis, as shown in the figure below:

Shenzhen Gooxi Hengyu Technology Co., Ltd
(5)The final installation effect of expandable hard disk shown in the figure below
(6) Restore the front cover when the expandable hard disk is finished installation
2.5.2 Installation Steps of Two Rear 2.5-inch Hot-swappable Hard Disks
⑴Install 2.5-inch hot-swappable hard drive module, as shown in the figure below:

Shenzhen Gooxi Hengyu Technology Co., Ltd
(2) Install two 2.5-inch hard drives on the hard disk box, respectively
(3) Insert two 2.5-inch hard drives to the rear hard disk module, respectively

Shenzhen Gooxi Hengyu Technology Co., Ltd
(4) Finished installation effect is shown as follows:
Note: If customer selects two optional 2.5-inch hot-swappable hard drives,
then CRPS power of Gooxi style should be equipped with.