Gorenje Ceramic glass induction hob Troubleshooting guide

Ceramic glass induction hob
MT Instructions for use, installation,
and connection
IE GB

243971
The built-in ceramic-glass cooktop is intended for household use
only. Materials used for packaging are nature friendly and may
be recycled, deposited or destroyed without any threats to the
environment. In order to recognize these features, all packing
materials are marked with relevant symbols.
Once your appliance has become obsolete and you do not
intend to use it any longer, take adequate care not to litter the
environment. Deposit your old appliance with the authorized
depot dealing with used household appliances.
Instructions for use have been prepared for the user, and
describe the particulars and handling of the appliance. These
instructions apply to different models from the same family of
appliances, therefore you may find information and descriptions
that may not apply to your particular appliance.
The appliance should be connected to the power supply in
accordance with the instructions from the chapter “Electrical
connections” and in line with the standing regulations and
standards. The connections should be carried out by a qualified
personnel only.
The rating plate with basic information is located underneath the
appliance.
Appliances are allowed to be mounted on one side next to a
high kitchen cabinet, the height of which may exceed that of the
appliance. On the opposite side however, only a kitchen cabinet
of equal height as the appliance is allowed.
Dear customer !Dear customer !
Instructions for useInstructions for use
Installation instructionsInstallation instructions
Rating plateRating plate
Fire hazard protectionFire hazard protection
Important warnings ........................................................3
Ceramic-glass cooktop.................................................. 4
Energy saving tips..........................................................7
Hob control .....................................................................8
Cleaning and maintenance of ceramic-glass hob..... 14
Mounting the built-in cooktop .....................................15
Connection to the power supplay...............................17
Technical information ..................................................19
2
Ceramic glass induction hob

243971
• The appliance may be built-in and connected to the power supply only by a qualified technician.
• Particular areas of the cooktop surface (adjacent to the hotplates) are hot during operation.
Prevent the children to hang around the appliance and warn them properly against the danger of
burns.
• Hot oil ignites readily, so be sure have the preparation of such food (fries) under constant control.
• Hotplates may not be left in operation empty, without any dishes on top.
• Never use the appliance for heating the ambience.
• Never use the ceramic-glass cooktop as a working surface. Sharp objects may damage the
cooktop surface.
• Never place any metal objects upon the induction hotplate, such as knives, forks, spoons, pot
lids, and the like, as they may get very hot.
• Preparation of food in aluminum or plastic cookware is not allowed. Never place any plastic
objects or aluminum foil upon the cooktop surface.
• In case any other appliances are plugged in the electric mains close to the cooktop, prevent the
contact of the plug cable with the hot cooking zones.
• Never keep any flammable or temperature sensitive objects, like cleaning agents, sprays,
detergents, etc., below the appliance.
• Never use cracked or broken ceramic-glass cooktop. In case you notice any visible cracks on the
surface, cut the power supply immediately.
• In case of any malfunctions, disconnect the appliance from the power supply and call service
department.
• Do not use high-pressure steam cleaner or hot steam to clean the appliance.
• The appliance is manufactured in compliance with the relevant effective safety standards.
Nevertheless, we strongly recommend that persons with impaired physical, motoric, or mental
capacity, or persons with inadequate experience or knowledge, do not use the appliance
unless attended by a qualified person. The same recommendation applies when the appliance
is used by persons of less-than-legal age.
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate
waste handling of thisproduct. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
Important warnings
3

243971
AON/OFF sensor
BHotplate power or remaining heat displays
B1 Decimal dot on the power displays:
- On: hotplate power control is possible
- Off: hotplate power control is not possible
CHotplate selection and ON/OFF sensors (+) (hotplate number varies with different models)
DChild lock ON/OFF sensor
ESensor (-)
FExtra strong power setting ON/OFF sensor
GTimer ON/OFF sensor, (+)
HTimer display
H1 Timer controlled hotplate signal lamp
H2 Decimal dot on clock display:
- On: time setting is possible
- Off: time setting is not possible
1. Induction hotplate rear left
2. Induction hotplate rear right
3. Induction hotplate front left
4. Induction hotplate front right
5. Hob control panel
4
Ceramic-glass cooktop
Hob control elements

243971
• Ceramic glass hob is fitted with four hotplates. Hob surface is
completely flat and smooth, without edges to accumulate dirt.
• The hob is fitted with high power induction hotplates. Heat is
generated directly at the bottom of the dish, where it is most
needed, without any losses through the ceramic glass surface.
This way the required extent of energy is considerably smaller
compared to traditional heaters, which operate on radiation
principle.
• Glass ceramic hotplate is not heated directly, but only by return
heat transmitted by the dish. This heat figures as “remaining
heat” after the hotplate is turned off. The induction hotplate
generates heat from the induction coil, installed underneath
the ceramic glass surface. The coil creates magnetic field at
the bottom of the dish (which can me magnetized) which in
turn originates whirling flows of current which then heat the
hotplate.
• Induction hotplate will function perfectly only if appropriate
cookware is used.
• Dish should be in the middle of the hotplate during cooking.
• The appropriate cookware is the one which enables induction,
for example steel, enamel or steel alloy cookware. Pots made
from steel alloy with copper or aluminum bottom, or glass pots
are inappropriate.
• If you use the pressure cooker (“economy pot”) keep it under
close surveillance until propre pressure is obtained. Hotplate
should first operate on maximum power, then follow the
manufacturer’s instructions and use the appropriate sensor to
decrease the power.
• When buying cookware, check if it bears the label “allows
induction”.
Cooking zones Minimum pan bottom diameter
Ø 145 mm Ø 90 mm
Ø 180 mm Ø 145 mm
Ø 210 mm Ø 170 mm
Ø 260 mm Ø 180 mm
Induction hotplate
function principle
Induction hotplate
function principle
Appropriate cookware
for induction hotplates
Appropriate cookware
for induction hotplates
IMPORTANT!
• In case sugar or other heavily sweetened substance is spilled on the hotplate, wipe it
immediately and remove the sugar residues with a scraper although the cooking zone is still hot,
otherwise the hotplate may be damaged.
• Avoid cleaning the cooktop while the cooking zones are still hot, as you may damage the hob.
5

243971
Magnet test
Use small magnet to test if the dish bottom is magnetic. Only
dishes where magnet sticks to the bottom are suitable for
induction cooking.
Dish recognition
One of great advantages of the induction hotplate is dish
recognition. Even if there are no dishes upon the hotplate, or
the dish diameter is smaller than the diameter of the relevant
hotplate, there are no thermal energy losses. When the hotplate
is on, the power indicator displays letter “U”. If you place the dish
over that hotplate within the following 10 minutes, the hotplate
recognizes the dish and turns on to the preset power value.
At the moment you remove the dish from the hotplate, power is
suspended. If you place smaller dish upon the hotplate and it
is recognized, the hotplate will only use the amount of energy
required to heat the dish according to its size.
Hotplate may be damaged if:
• it is turned on and left empty, or an empty dish is placed on it;
• you use clay dishes which leave scratches on the ceramic
glass surface;
• you fail to wipe the dish bottom dry prior placing it on the
ceramic glass hotplate; heat induction is obstructed and the
hotplate may be damaged;
• you fail to use the appropriate dishes that can be magnetized:
steel dishes, enamel or steel alloy dishes; induction hotplate
will not function otherwise.
Heating power of the hotplates may be set at nine different
levels. The following chart indicates illustrative use of each power
setting.
Power regulationPower regulation
Power setting Purpose
0Off, using remaining heat
1 - 2 Maintaining warm food, slow simmer of smaller quantities (lowest setting)
3Slow simmer (continuation of cooking after a powerful start-up)
4 - 5 Slow cooking (continuation) of larger quantities, roasting larger chunks
6Roasting, browning
7 - 8 Roasting
9Start of cooking, roasting
AAutomatic initial setting
PEspecially powerful setting for extremely large quantities of food (for rear
hotplates only)
6

243971
• When buying cookware be careful in selecting size: pot diameter usually refers to the top edge of
the dish, which is often larger than the dish bottom.
• Steam-pressure pots (economic pots), which use pressure in tightly sealed interior, are
especially economic, and save both time and energy. Shorter cooking time leaves more vitamins
in food.
• Always leave enough water in steam-pressure pots, otherwise it may result in overheating which
may damage both the pot and the hotplate.
• Always cover the cookware with lids of appropriate size.
• Use such dish size to accommodate the quantity of food to be prepared. If you use excessively
large pot for small amount of food, you will consume considerably more energy.
7
Energy saving tips

243971
• After turning the ceramic glass hob on all displays come on for
a moment. The hob is ready for operation.
• The hob is fitted with electronic sensors which are switched on
if you touch the relevant circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error
signalization). Always keep the sensor surface clean.
Touch the ON/OFF sensor (A) for at least one second. The hob
is now active, and all hotplate power indicators (B) indicate »0«,
decimal dot (B1) is flashing.
Now you need to select the next setting within 10
seconds, otherwise the hob switches off again.
After turning the hob on using the ON/OFF sensor (A), within the
next ten seconds start one of the hotplates.
• Touching the desired hotplate sensor (C), its relevant power
indicator indicates »0« and decimal dot (B1) is on.
• By touching sensors »+» (C) or »-« (E) set the desired cooking
power from 1 to 9.
Continuous pressing of »+» (C) or »-« (E) ssensor the
power level is automatically increased or reduced.
Another procedure is to change power in steps is by
intermediate touching of relevant sensors.
Setting is always possible for one hotplate only
at the time - the one with the decimal dot on (B1).
Power display indicates »0«, or „H“, depending on
the existing temperature of the hotplate (see Section
Remaining Heat Indicator).
You can also turn the hotplate off prior the end of
cooking and use the remaining heat, and save energy.
• Selected hotplate must be activated, decimal dot (B1) is on.
• Touching the hotplate sensor »-» (E) set the power level to
»0«. After 3 seconds the hotplate is turned off.
Activating the hobActivating the hob
Turning hotplates onTurning hotplates on
Turning hotplates offTurning hotplates off
8
Hob control

243971
Fast deactivation
• Selected hotplate must be activated, decimal dot (B1) is on.
• Press both (+) and (-) (C and E) sensors simultaneously, and
the hotplate is immediately switched off.
• The hob can be switched off any time by pressing the ON/OFF
sensor (A).
By activating the child lock protection you can stop the operation
of the appliance, i.e. the use of hotplates, protecting the children
from accidental start and eventual injury.
Activating child lock
• Switch all hotplates off (setting “0”).
• Touch sensor (A) and activate the hob (in case it was idle). All
displays indicate »0«.
• Press sensors (D +/-) simultaneously. After the beep press
the sensor (+) again. All displays indicate letter »L«, which
disappears after a few seconds. Child lock is now activated.
Turning child lock off
• Protection is switched off by pressing the sensor (A). All
displays indicate the letter L.
• Press simultaneously sensors (D +/-). After the beep press
sensor (-) again. Child lock is now off.
Glass ceramic hob also features remaining heat indicator
“H”. Hotplates are not heated directly, but through return heat
radiating from the dish. As long as the symbol “H” is on after the
hotplate was switched off, the remaining heat may be used for
warming up food or for melting.
Even when the symbol “H” disappears, the hotplate may still be
hot. Be careful of burns!
Extra powerful setting may be additionally switched on for fast
cooking on all hotplates. This extra hotplate power is used for
heating large quantities of food.
After switching on, the extra power is activated for ten minutes, then
automatically switches back on to the maximum normal level 9.
Turning the hob offTurning the hob off
Child lockChild lock
Remaining heat indicatorRemaining heat indicator
Extra powerful setting
(hotplates marked “P”)
Extra powerful setting
(hotplates marked “P”)
9

243971
During the time extra power is activated, the power of other
hotplates is limited. This is indicated on the power display by
intermittently showing the selected cooking level and limited power.
Activating extra powerful setting
• First select the hotplate by touching its relevant sensor, and
immediately after press the sensor “P”. Extra powerful setting
is on, and power indicator displays symbol “P”.
• After ten minute lapse the hotplate automatically switches to
level 9.
Premature turning extra powerful setting off
Touch the desired hotplate sensor, and immediately after
press the sensor “P”. Letter “P” disappears and the hotplate
automatically switches to level 9.
The entire hob is fitted with special mechanism which makes
the hotplates operate at full power at the beginning of cooking,
regardless of the selected setting. After certain time the power of
the hotplate returns to the originally set value (1 to 9).
In using this mechanism it is only necessary to select the
appropriate power level for the intended preparation of food,
which is to be used during that particular cooking session.
Automatic fast heating is appropriate for...
• food which is cold at the beginning of preparation and needs
to be heated at elevated power of the hotplate, followed by
extensive cooking at normal heating power without the need to
monitor it at all times (for example, stewed beef).
Automatic fast heating is not appropriate for...
• frying, roasting or simmering food which needs to be frequently
turned around, stirred, or added water;
• dumplings or pastry with lots of liquid;
• food for long stewing in steam-pressure pot.
Activation of automatic fast heating
• Selected hotplate must be set to level “0”.
• Touch the sensor “E” and the display switches to the power
setting 9.
• Press the sensor “+” (C) of the relevant hotplate and the
display indicates letter “A”.
• Select desired power level.
Power indicator intermittently displays the “A” symbol and the
selected power setting. When the fast heating period expires,
hotplate switches to the preselected power setting, displayed
constantly on the indicator.
Automatic fast heatingAutomatic fast heating
10

243971
Hint
• If the power selection knob remains at level 0 three seconds
after the automatic fast heating is activated, that is if you fail to
select the power setting for regular cooking, the fast heating
function is switched off.
• If you remove the dish from the hotplate and then within the
next ten minutes return it on the hotplate, the fast heating
function will resume operating fully to the end.
Power setting Duration of automatic fast
heating (in minutes)
10,8
22,4
33,8
45,2
56,8
62,0
72,8
83,6
90,2
If you activated the automatic fast heating function
and also switched on extra powerful heating, the
latter will prevail over the automatic setting.
Safety switch off
Power setting Hours lapse prior safety switch off
16
26
35
45
54
61,5
71,5
81,5
91,5
P10 minutes P, then 80 minutes at
level 9
Maximum continuous operation of a particular hotplate is limited,
and the duration is displayed in the above chart. When the
hotplate is switched off by the safety mechanism, the indicator
displays symbols “0”, or “H” in case there is any remaining heat
left.In such cases switch the hotplate off by touching the relevant
power setting sensor (C).
11

243971
Example:
Set the hotplate to power level 6 and leave it operate for
some time. If you do not change the above setting, the safety
mechanism will switch the hotplate off after one hour and a half.
Protection from overheating
Induction hotplate is also fitted with safety device against
overheating which protects electronic parts from damages. This
device operates on several levels. When temperature of the
hotplate excessively rises, it switches on two-stage fan. If this
is not enough, extra powerful heating is deactivated, and finally
the safety device either reduces the heating power of certain
hotplates or turns them off completely. When the hotplate cools
off, the full power of hotplate is again available.
Timer facilitates the cooking procedure by setting the period of
hotplate operation, and it can also be used as alarm timer.
Activating the timer
• Touch the hotplate ON/OFF sensor (C) of the relevant
hotplate. Decimal dot (B1) is on.
• By touching the »+» or »-« (C or E) sensor select the power
setting from 1 to 9.
• Touch the timer ON/OFF sensor (G) to activate timer. Timer
display (H) indicates »00«.
• By touching sensors »+» or »-« (G or E) set the desired
cooking time (from 01 to 99 minutes). After a few seconds
timer starts operating. Timer controlled hotplate control lamp
(H1) is on.
You can use timer to set exact cooking time for each
hotplate at the same time. To speed up the timer
setting keep the relevant sensors »+» or »-« (G or E)
constantly pressed.
Altering preset cooking time
• You can change preset cooking time whenever you wish
during the hotplate operation.
• Touch the hotplate ON/OFF sensor (C) to select the desired
hotplate. Decimal dot (B1) is on.
• Touch the timer ON/OFF sensor (G) to activate the timer.
Display (H1) of the selected hotplate is flashing.
• By touching sensors »+» or »-« (G or E) set the new desired
cooking time.
Timer operationTimer operation
12

243971
Remaining cooking time
You can display the remaining cooking time by touching the
hotplate ON/OFF sensor (C).
Switching the timer off
When the preset time expires a beep is heard which you can
either turn off by touching any sensor or leave it to turn off
automatically after 2 minutes.
Switching the timer of prior expiry of preset time:
• Touch the hotplate ON/OFF sensor (C) to select the desired
hotplate. Decimal dot (B1) is on.
• Touch the timer ON/OFF sensor (G).
• By touching the sensor »-» (E) set cooking time to »00«. Timer
function is off, but the hotplate continues to operate until you
switch it off manuallay.
Fast switch off
• Touch the hotplate ON/OFF sensor (C) to select the desired
hotplate. Decimal dot (B1) is on.
• Simultaneously touch both »+» and »-« (G and E) sensors and
switch the hotplate off. Timer display (H) indicates »00«, and
the hotplate indicator displays the preset power setting level.
Timer can be used as alarm only if it is not already employed in
timer control of one of the hotplates.
Timer setting
With the hob off:
• Touch the hob ON/OFF sensor (A) to activate the cooking hob.
• Touch the timer ON/OFF sensor (G) to activate the timer.
• By touching sensors »+» (G) or »-« (E) set the desired time.
Switching the alarm off
When the preset time expires a beep is heard which you can
either turn off by touching any sensor or leave it to turn off
automatically after 2 minutes.
If you want to switch the timer off prior expiry of preset time:
• Touch the timer ON/OFF sensor (G).
• By touching the sensor »-» (E) set cooking time to »00«. Alarm
function is off.
Simultaneously touch both »+» and »-« (G and E) sensors and
switch the timer off.
Alarm timer functionAlarm timer function
13

243971
• During the time the alarm is activated, timer can not be preset
for any hotplate (to enable timer setting function, alarm must
be switched off).
The hob is equipped with the overheat safety sensors. When
they are activated they turn off the hotplates nearest to the
control board.
Error, possible cause, remedy
• Constant sound signal or Err 33
- Water is spilled over sensor surface (Wipe the sensor
surface)
• Flashing »H«
- Hot pan is placed above the sensor surface (Wait until
normal sensor temperature is regained.).
- Gaskets on heating elements are damaged. (Wait until
normal sensor temperature is regained.).
In case any other error signal is displayed, switch the
hob off immediately, disconnect it from the mains and
contact your nearest service center.
Safety functions and
error display
Safety functions and
error display
Ceramic glass hob should be cleaned only when completely
cooled down, preferably after each use, otherwise even the
slightest stains remaining after cooking may burn into the hob
surface with each following use.
For regular maintenance of ceramic-glass hob use special
cleansing agents, produced in such way to create protective film
upon the surface.
Before each use, wipe the dust and other particles from the hob
- they may scratch the surface (Fig. 1).
Caution: use of steel wool, abrasive cleaning sponges, and
abrasive detergents can scratch the surface of the hob. The
surface may also be damaged by the use of aggressive sprays
and inappropriate liquid chemicals (Fig.1 and 2).
Pattern marks can be erased by the use of aggressive cleansing
agents or rough and damaged cookware bottoms (Fig. 2).
Minor stains are removed with moist soft cloth; after that the
surface should be wiped dry (Fig. 3).
Water stains are removed with gentle vinegar solution, but you
must not wipe the frame with it (certain models only), since it
may lose its glow. Never use any aggressive sprays or limestone
removers (Fig. 3).
fig. 1
fig. 2
fig. 1
fig. 2
14
Cleaning and maintenance of ceramic-glass hob

243971
Major stains are removed with special ceramic-glass cleansers.
Follow strictly the manufacturer’s instructions.
Be careful to remove any remains of cleansing agent from the
hob surface, otherwise they will be heated during the next use
and can damage the hob (fig. 3).
Stubborn and burnt stains are removed with special ceramic-
glass scraper. Be careful, however, not to touch the hotplate
surface with the scraper handle (Fig. 4).
Handle the scraper with utmost care to avoid injuries!
Sugar and sugar containing food may permanently damage the
ceramic-glass hob surface (Fig.5), so the remains of sugar and
sugar containing food must be scraped off from the hob surface
immediately, when the hotplates are still hot (Fig. 4).
Discoloring of ceramic-glass hob has no effect whatsoever
on its operation and stability. In most cases, it appears as the
consequence of burnt in food remains, or as a result of dragging
pots and pans (especially aluminum or copper bottom cookware)
across the surface, and such discoloring is rather hard to
remove.
Note: All described faults are mostly esthetical and do not affect
directly the operation of the appliance. Remedy of such faults is
not covered by warranty.
fig. 3
fig. 4
fig. 5
fig. 3
fig. 4
fig. 5
• To avoid any possible hazard, the appliance may be installed by qualified personnel only.
• Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with
temperature resistant adhesives (100°C), otherwise they might be discoloured or deformed
because of inadequate temperature resistance.
• The cooking hob is intended for building into the worktop above the kitchen element of 600 mm
width or more.
• After the installation of built-in hob make sure that there is free access to the two fixing elements
in front.
• Suspended kitchen elements above the cooktop must be installed at such distance to provide
enough room for comfortable working process.
• The distance between the worktop and the hood must be at least such as indicated in the
instructions for installation of the kitchen hood, but in no case it may be less than 650 mm.
• The use of hard wood decorative borders around the worktop behind the appliance is allowed, in
case the minimum distance remains as indicated on the installation illustrations.
• Minimum distance between the built-in cooktop and rear wall is indicated at the illustration for the
installation of the built-in cooktop. 15
Caution !
Mounting the built-in cooktop

243971
Before inserting the appliance into the opening in the kitchen
worktop, the supplied foam gasket must be attached to the lower
side of the glass ceramic (glass) cooking hob (see figure above).
Do not install the appliance without the foam gasket!
The gasket should be attached to the appliance in the
following way:
- Remove the protective film from the gasket.
- Then, attach the gasket to the lower side of the glass,
approximately 2-3 millimetres from the edge (as shown in the
figure). The gasket must be attached along the entire length of
the glass edge and should not overlap at the corners.
- When installing the gasket, make sure that the glass does not
come into contact with any sharp objects.
NOTE!
On some appliances the gasket is already installed!
Installing the foam
gasket
Installing the foam
gasket
• Induction hob may be built into the 30 to 50 mm thick
worktops.
• Bottom kitchen element must not have a drawer. It must be
fitted with a horizontal plate 140 mm away from the worktop
bottom surface. Space between the plate and the hob must be
16
Built-in induction hob
opening dimensions

243971
empty and no objects may be stored or kept there.
• Rear side of the kitchen element must also have a 140 mm
high opening along the entire width of the element, and the
front part must have an opening of no less than 6 mm.
• Incorporation of the oven under the induction hob is
permissible for all EVP4, EVP2…, oven types, equipped with a
cooling fan. Prior inserting the oven, it is necessary to remove
the rear kitchen element panel in the area of the oven opening.
Equally, the front part of the element must have an opening of
no less than 6 mm.
• Worktop must be placed absolutely horizontal.
• Suitably protect the edges of the cut aperture.
• By means of the supplied screws 4 fasten the supplied
tightening brackets 4 fasten to the front and the rear side of
the cooking hob and to the prepared aperture.
• Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
• Insert the hob into the cut aperture.
• Press the hob firmly towards the worktop from above.
• For screwing down the fixing clip it is not allowed to use
screws longer than 6,5 mm.
Installation procedureInstallation procedure
• Connections may be carried out by a qualified technician
only. The earthing protection must comply with the standing
regulations.
• Connection terminals are revealed when the connection box
cover is removed.
• Prior any attempted connection check that the voltage
indicated on the rating plate is in line with your home power
supply.
• The rating plate is located underneath the appliance.
• The appliance is manufactured for use with the power supply
voltage 230 V ~.
• The electric wiring should be equipped with a circuit breaker
able to isolate the appliance from the mains in all points,
with the distance between terminals of at least 3 mm in
open position. This may be done by means of fuses, safety
switches, etc.
17
Connection to the power supplay

243971
• The connection should be selected in accordance with the
declared charge capacity of the mains and the fuse power.
• Such appliances are allowed to be mounted on one side next
to a high kitchen cabinet, the height of which may exceed that
of the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
• Upon the completion of installation, live wires and isolated
cables must be adequately protected against accidental
touching.
Upon each connection to the power supply the sensors of the
appliance are automatically adjusted to the environment to
ensure their proper function. All displays turn on and are fully
illuminated for a few seconds.
During the adjustment procedure the sensors must be free of any
objects, otherwise the adjustment procedure will be interrupted
until such objects are removed from the sensor surface. During
this period the regulation of the cooktop is impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect
the power supply. In accordance with the mains voltage the
appliance should be connected in line with the attached diagram.
The earthing wire (PE) must be connected to the terminal
marked with the earthing symbol .
The connection cable must lead through the relief safety device,
protecting it from accidental pulling out. Upon the completion
of installation switch all the hotplates on for about 3 minutes to
check the proper functioning.
Connection may be carried out by means of:
- rubber coated connection cables, model H05 RR-F 4x1,5 with
yellow-green earthing cable;
- PVC insulated connection cables, model H05 VV-F 4x1,5 with
yellow-green earthing cable; or any other suitable cables.
Basic adjustment of
sensors to the ambience
Basic adjustment of
sensors to the ambience
Installation diagramInstallation diagram
18

WE RESERVE THE RIGHT TO ALTER THE
SPECIFICATIONS WITH NO INFLUENCE TO THE
OPERATION OF THE APPLIANCE.
243971
Technical information
Rating plate
A Serial number
BCode
CModel
DType
ETrademark
FTechnical information
GCompliance indications / symbols
19

SIVK - ORA ITO 243971/en (04-10)