Gorenje INFINITY EC6INI User manual

Instructions for Use
GB

504597
Glass-ceramic hob is intended for use in
households.
Our products are packed in environment-friendly materials
which can be recycled, disposed of, or destroyed without
imposing any burden on the environment.
Instructions for use are intended for the user. They
describe the appliance and its operation. The instructions
apply to various types of appliances and may therefore
include description of functions that may not be available
on your appliance.
The appliance must be connected in compliance with the
instructions attached to it, as well as in compliance with
relevant regulations and standards. The connection may
only be performed by a qualified person.
The rating plate indicating the basic information on the
appliance is attached to the lower side of the hob.
When the cooking hob is built-in, a kitchen furniture
element that is higher than the hob can stand next to in on
one side, provided the kitchen element on the other side
of the hob is not higher than the hob level.
Instructions for use
Instructions for
connection
Rating plate
Fire risk protection
Dear customer!
3
GLASS-CERAMIC BUILT-IN COOKING HOB

504597
IMPORTANT - READ BEFORE USING THE APPLIANCE..........................................5
Safety percautions........................................................................................................................5
Warnings............................................................................................................................................5
APPLIANCE DESCRIPTION ............................................................................................7
COOKING ZONES .............................................................................................................8
Before using the appliance for the first time...................................................................8
Important warnings......................................................................................................................8
Cookware ..........................................................................................................................................9
Energy saving..................................................................................................................................9
OPERATING THE COOKING HOB – CONVENTIONAL ZONES.............................10
Double-ring cooking zone switch .........................................................................................11
Control lights...................................................................................................................................11
Warning lights (only with some models)...........................................................................11
CLEANING AND MAINTENANCE................................................................................ 12
Cleaning ............................................................................................................................................12
INSTALLATION ................................................................................................................ 13
Important warnings.................................................................................................................... 13
Installing the foam gasket....................................................................................................... 14
Worktop cutout dimensions .................................................................................................. 14
CONNECTING THE APPLIANCE TO THE POWER MAINS..................................... 16
Important warnings.................................................................................................................... 16
Connection diagram ...................................................................................................................17
TECHNICAL CHARACTERISTICS ................................................................................ 18
Rating plate.................................................................................................................................... 18
4
TABLE

504597
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
metal capabilities or lack of experience and knowledge
if they have been given supervision or instruction
concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
• WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements. Children less than 8 years of age shall
be kept away unless continuously supervised.
• WARNING: Danger of fire: do not store items on the
cooking surfaces.
• WARNING: Unattended cooking on a hob with fat or oil
can be dangerous and may result in fire. Never try to
extinguish a fire with water, but switch o the appliance
and then cover flame with a lid or a damp cloth.
• After use, switch o the hob element by its control and
not rely on the pan detector.
• WARNING: If the surface is cracked, switch o the
appliance to avoid the possibility of electric shock.
• Do not use steam cleaners or high-pressure cleaners to
clean the cooking hob, as this may result in an electric
shock.
• The appliance is not intended to be controlled by external
timers or special control systems.
• The appliance may only be connected to the power mains by an authorized service
technician or expert.
• Tampering with the appliance or non-professional repair thereof may result in risk of severe
injury or damage to the product. Any repairs may only be carried out by an authorized
service technician or expert.
5
IMPORTANT - READ BEFORE USING THE
APPLIANCE
Safety percautions
Warnings

504597
• The appliance is intended solely for cooking. Do not use it for any other purpose, e.g. for
room heating. Do not place empty cookware on the cooking zones.
• If another electrical appliance is connected to a AC power socket near the appliance, make
sure the power cord does not come into contact with hot cooking zones.
• Do not store temperature-sensitive items underneath the appliance, such as cleaners or
detergents, spray cans etc.
• Using the glass ceramic hob as a storage area may result in scratches or other damage to
it. Never heat food in aluminium foil or in plastic containers on the cooking hob. Such foil or
containers may melt which can result in a fire or damage to the cooking hob.
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of thisproduct. For more detailed information
about recycling of this product, please contact your local city oce, your household
waste disposal service or the shop where you purchased the product.
6

6
1. Cooking zone rear left
2. Cooking zone front left
3. Signal lights
4. Cooking zone rear right
5. Cooking zone front right
6. Cooking hob control unit
504597
7
APPLIANCE DESCRIPTION

504597
Clean the glass-ceramic surface with a damp cloth and
some manual dishwashing detergent. Do not use aggressive
detergents such as abrasive cleaners that can scratch the
surface, abrasive dishwashing sponges, or stain removers.
• Do not turn on a cooking zone without a pan over it, and
never use the cooking hob for room heating!
• Make sure the cooking zones and pan bottom are clean
and dry, and that sucient heat transmission is enabled
between them, in order to prevent any damage to the
heating surface.
• Any fat or oil left on the cooking ones may ignite.
Therefore, be careful when using fat and oil to prepare food
(e.g. French fries) and control the cooking process at all
times.
• Do not place a damp pan or a steam-covered lid on the
cooking zones, as moisture is detrimental to them.
• Do not leave a hot pan to cool down on the cooking zones,
because moisture will be generated under it, causing
corrosion.
Important warnings regarding the glass ceramic hob
• Cooking zone reaches the selected power level or
temperature very quickly; however, the area surrounding
the cooking zones remains relatively cool.
• The hob is resistant to temperature changes.
• The hob is also impact-resistant. The pans may be placed
onto the hob roughly without damaging the hob.
• Glass ceramic hobs should not be used as a worktop.
Sharp objects can cause scratches.
• Preparing food in thin aluminum of plastic containers on
hot cooking zones is not allowed. Do not place any plastic
objects or aluminum foil on the glass ceramic hob.
• Never use a glass-ceramic hob that is cracked or broken. If
an object falls on the hob with a sharp edge downwards,
this could cause the hob / glass ceramic panel to break.
The consequences are visible immediately, or only after
a while. If any visible crack should appear, immediately
disconnect the appliance from the power supply.
• If sugar is spilt on a hot glass ceramic hob, or a sugar-laden
food, immediately wipe the hob.
Before using the
appliance for the first
time
Important warnings
8
COOKING ZONES

504597
Tips on using the cookware
Use high-quality cookware with a flat and stable bottom.
• Transmission of heat is best when the pan bottom and
the cooking zone are of the same diameter, and the pan is
placed on the middle of the cooking zone.
• When using a tempered glass (Pyrex) or porcelain
cookware, please follow the cookware manufacturer’s
instructions.
• When using a pressure cooker, do not leave it unattended
until the desired pressure is reached. The cooking zone
should initially be set to the maximum power level; as the
pressure rises, use the sensors to decrease the power
level according to the pressure cooker manufacturer’s
instructions.
• Make sure there is always enough water, either in a pressure
cooker or in any other piece of cookware, as using an
empty pan on the cooking hob will result in overheating
which will damage both the pan and the cooking zone.
• Tempered glass (Pyrex) cookware with a specially brushed
bottom is suitable for use on cooking hobs if it fits the
diameter of the cooking zone. Cookware with larger
diameter may break due to thermal stress.
• When using any special or unconventional cookware, follow
the cookware manufacturer’s instructions.
• When a highly reflective pan (bright metal surface) or a
pan with a thick bottom is used for cooking on a glass-
ceramic hob, cooking time can be extended by several
minutes (up to 10 minutes). If you wish to boil a larger
quantity of food, it is recommended to use a container with
a flat dark bottom.
• Do not use clay cookware, because it may leave scratches
on the glass-ceramic hob.
• Pan bottom diameters should match the diameter of the
cooking zone. If the pan is too small, some heat is wasted;
furthermore, using a too small pan can damage the
cooking zone.
• Whenever possible given the cooking process, use a lid.
• The pan should be appropriately sized given the quantity
of food prepared. Preparing a small quantity of food in a
large pan will cause a waste of energy.
• Dishes that take a long time to cook should be prepared in
a pressure cooker.
• Various vegetables, potatoes, etc., can be cooked in a small
quantity of water; however, the lid should be closed tightly.
When the water is brought to boil, reduce the power level
to a setting that maintains a temperature just above boiling
point.
Cookware
Energy saving
9

504597
• Turn on the cooking zone using the knobs installed on
the control panel.
• The symbol next to each knob indicates which cooking
zone is operated by it.
• Cooking zone power level can be set continuously (1-9).
• The cooking zone may be turned o three to five
minutes before the end of cooking in order to make
use of the residual heat and save some energy (the
following table lists some examples for using individual
power levels).
E
0Cooking zone turned o
1-2 Maintaining the temperature and reheating of
smaller quantities of food
3-4 Reheating
5-6 Reheating or longer cooking of larger quantities
7Consecutive cooking / frying (e.g. omelets etc.)
8Deep frying
9Quick heating
10
OPERATING THE COOKING HOB –
CONVENTIONAL ZONES

504597
When the double-ring cooking zone control switch is
rotated normally, the basic cooking zone (internal) is
activated. If you wish to activate the entire cooking zone,
rotate the knob to the symbol that follows the number
signs, to hear a ‘click’ sound; then, rotate it back to the
desired position. The entire cooking zone is switched o
by rotating the knob back to the “0” position.
Glass ceramic cooking hobs are fitted with warning control
lights in the front part of the panel. If a particular warning
control light is lit, is means that the corresponding cooking
zone is hot (risk of burning). When the cooking zone is
switched o, the warning light remains lit until the cooking
zone cools down to under 50°C.
Double-ring cooking
zone switch
Warning lights
11

504597
After each use of the glass-ceramic hob, wait for it to cool
down and clean it; otherwise, even the smallest food residue
will be burnt onto the hot surface next time you use the
appliance. For regular cleaning and maintenance of the
glass-ceramic surface, use special conditioning agents
which form a protective layer on the surface, shielding it from
dirt. Before each use, wipe any dust or other particles from
the hob surface and pan bottom as these could scratch the
surface (Figure 1).
Careful: steel wool, abrasive sponges, and abrasive
detergents can scratch the hob surface. Glass ceramic surface
can also be damaged by aggressive sprays and inappropriate
or insuciently shaken (mixed) liquid cleaning agents (Figure
1 and Figure 2).
Signage may be worn when using aggressive or abrasive
cleaners or cookware with damaged bottom (figure 2).
Light stains can be removed by a damp soft cloth; then, wipe
the surface dry (Figure 3).
Water stains can be removed using a mild solution of
vinegar; however, do not use this solution to clean the frame
(only with some models, as it may become dull. Do not use
aggressive sprays or decalcification agents (Figure 3).
Heavier stains can be removed using special agents and
utensils for cleaning the glass-ceramic hobs. When using
these products, follow the instructions provided by their
respective manufacturers.
Make sure any residues of cleaning agents are thoroughly
removed, as they could damage the glass-ceramic hob
when the cooking zones heat up (Figure 3).
Remove stubborn and burnt residues with a scraper (figure
4).
Be careful when handling the scraper to prevent injury.
Only use the scraper when dirt cannot be removed
with a wet cloth or special cleaners for glass ceramic
surfaces.
Hold the scraper at the correct angle (45° to 60°). Gently
press the scraper against the glass and slide it over the
signage to remove the dirt. Make sure the plastic handle of
the scraper (in some models) does not come into contact
with a hot cooking zone.
Do not press the scraper perpendicularly against the
glass and do not scratch the hob surface with its tip or
blade.
Cleaning
Figure 2
Figure 3
Figure 4
Figure 1
12
CLEANING AND MAINTENANCE

504597
• Installation of the appliance into a kitchen worktop and its connection to the power
mains may only be performed by an adequately qualified technician.
• Veneer or other finish of the piece of kitchen furniture into which the hob is to be built
in should be treated with heat resistant glue (100°C); otherwise, the worktop finish may
be discolored or deformed.
• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen
furniture, with a width of 600 mm or more.
• After installation, the front two fastening elements should be freely accessible from
below.
• Hanging, or wall-mounted kitchen elements should be installed high enough not to
interfere with the work process.
• The distance between the cooking hob and the kitchen hood should be no less than
indicated in the instructions for kitchen hood installation. The minimum distance is 650
mm.
• The distance between the appliance edge and the adjacent tall kitchen furniture
element should amount to no less than 40 mm.
• Use of massive wood decoration plates or boards on the worktops behind the cooking
hob is permitted, if the minimum distance remains the same as indicated in the
installation drawings.
• Minimum distance between the built-in cooking hob and the rear wall is indicated on
the installation drawing.
Important warnings
Sugar and sugar-laden food may permanently damage the
glass-ceramic surface (Figure 5); therefore, they should be
removed from the glass-ceramic surface as soon as possible,
although the cooking zone may still be hot (Figure 4).
Clean the glass ceramic hob with a mild non-abrasive cleaner
and a soft sponge that will not scratch the surface.
Any change in the color of the glass-ceramic surface does
not aect its operation or the stability of the surface. Such
discolorations are mostly a result of burnt food residues or
use of cookware made of materials such as aluminum or
copper; these stains are dicult to remove.
Warning: All damage described above predominantly relates
to the aesthetics, i.e. appearance of the appliance and do
not aect its functionality directly. Such errors cannot be the
subject of a warranty claim.
Figure 5
13
INSTALLATION

min 20
558-560
min 600488-490
min 40
51
min 50
R10
595
510
81-86
504597
• Cooking hobs can be installed into worktops that are 30
to 50 mm thick.
• The kitchen furniture element underneath the hob
should not be fitted with a drawer. If the kitchen
furniture element as a horizontal partition wall, it should
Before inserting the appliance into the opening in the
kitchen worktop, the supplied foam gasket must be
attached to the lower side of the glass ceramic (glass)
cooking hob (see figure above). Do not install the
appliance without the foam gasket!
The gasket should be attached to the appliance in the
following way:
- Remove the protective film from the gasket.
- Then, attach the gasket to the lower side of the glass,
approximately 2-3 millimetres from the edge (as shown
in the figure). The gasket must be attached along the
entire length of the glass edge and should not overlap
at the corners.
- When installing the gasket, make sure that the glass
does not come into contact with any sharp objects.
NOTE!
On some appliances the gasket is already installed!
Installing the foam
gasket
14
Worktop cutout
dimensions

504597
be installed no less than 60 millimeters from the lower
surface of the worktop. The space between the partition
wall and the hob must be empty; no objects should be
placed into that gap.
• On the furniture back wall there should be a cutout with
width of at least 175 mm along the entire width of the
furniture element.
• Only type EVP4..,EVP2.., ovens fitted with a cooling fan
may be installed underneath this cooking hob.
Installation procedure
• The worktop should be installed completely horizontally.
• The cuto surfaces should be appropriately protected.
• Attach the fastening elements (4x - SVK6…600 mm; 6x
- SVK7…750 mm; 6x - SVK8…850 mm) with the supplied
screws (4x - SVK6…600 mm; 6x - SVK7…750 mm; 6x -
SVK8…850 mm) to the left and right wall of the cooking
hob and the worktop cuto.
• Connect the cooking hob to the power mains (see
instructions for connecting a cooking hob on a power
network).
• Insert the cooking hob into he cuto and press it heavily
from above against the worktop.
• For screwing down the fixing clip it is not allowed to
use screws longer than 6,5 mm.
• Before installing an oven, the rear wall of the kitchen
furniture element should be removed in the area of the
cooking hob cutout.
15

504597
• The appliance may only be connected by an authorized skilled technician.
• Electric system protection should comply with all relevant regulations.
• The connection clips can be accessed when the connection clip covers are opened /
removed.
• Before connecting the appliance, make sure the voltage indicated on the rating plate is
consistent with the voltage in your home circuit.
• The rating plate with basic information is attached on the lower side of the hob.
• The electric circuit should also include an omnipolar switch that will separate the
appliance from the mains, if required, with at least 3 mm of distance between contacts.
Suitable devices include fuses, current protection switches, etc.
• The connection should be selected according to the installation possibilities with regard
to current and fuses.
• Given the protection from the risk of fire, appliances of this type may be installed in
a worktop next to a piece of kitchen furniture that is taller than the appliance (when
installed); however, in this case, a kitchen furniture not higher than the cooking hob must
be installed on the other side, adjacent to the appliance.
• The current conducting and isolated parts must be protected from any possibility of
direct contact.
ATTENTION!
• Before any manipulation with the appliance (other than its regular use), disconnect it
from the power mains. The appliance should be connected according to the relevant
scheme (diagram), subject to the network voltage. Connect the earth (PE) wire to the
clip indicated with the earth /ground symbol.
• The mains cord must be fed through the fastening clip / strain release device which
protects it from being pulled out accidentally.
• After connecting the appliance, turn on all cookers for approximately three minutes to
check their operation.
Important warnings
16
CONNECTING THE APPLIANCE TO
THE POWER MAINS

504597
• The appliances are suitable for photovoltaic electrical
power under the condition that electrical voltage will
be 220VAC - 240VAC with semi tonic frequency 50 Hz
in order the appliance to operate properly (alternative
a generator can be used with the same technical
characteristic).’’
• Incorrect connection may destroy parts of the appliance,
making the warranty void.
• Before connecting the appliance, make sure the voltage
indicated on the rating plate is consistent with the
voltage in your home network. Connection voltage
(230 V through N) should be checked by a qualified
technician using a corresponding measuring device!
• Connection cable on the back of the appliance should
be led in such way that it does not touch the appliance
back wall, as this part will get very hot during operation.
NOTE:
Connection bridges are already installed on their
respective places on the clip. Screws of the connection
terminals are open, which means they do not have to be
unfastened or unscrewed any further. When fastening the
screws, you may hear a slight ‘click’, which means that the
screws should be fastened / screwed in completely.
The following can be used for connection:
• Type H05 RR-F 4×1.5 rubber connection cables with a
green-yellow protective wire,
• Type H05 VV-F 4x1,5 PCV insulated connection cables
with yellow-green protective wire, or other equivalent or
superior grade cables.
Connection diagram
17

WE RESERVE THE RIGHT TO MAKE ANY CHANGES
THAT DO NOT AFFECT THE FUNCTIONALITY OF THE
APPLIANCE.
504597
Rating plate
A Serial number
B Code
C Model
D Type
E Trademark
F Technical information
G Compliance indications / symbols
Instructions for use of the appliance can also be found on our
website at www.gorenje.com / < http://www.gorenje.com />
18
TECHNICAL CHARACTERISTICS


www.gorenje.com
SVK65ES en (12-15)