Gorilla GGT59 User manual

1.
2.
Unpack
Check
Corner Piece
4 Way
Connector
3 Way
Connector
PolesSpill PoolTent
1x 1x 8x 4x 4x
2x
2x
8x
6x 6x 6x 5x
Instructions
5x9 Gorilla Grow Tent
Extension Skirt
1x

3. Unfold, unzip, then lay flat.
NOTE: Your tent may look different than this illustration.

4.Assemble frame inside of tent floor beginning with
frame base, and building upward
*If you do not plan on using the height extension DO NOT add the C+ poles

5.
6. Starting at the back of the tent add & zip extension skirt
Place roof onto tent frame.
Carefully guide each corner of the roof over each corner of the frame a little at a
time. This will allow plenty of slack to properly fit the corners. Do not fully seat the
roof at one corner and attempt to stretch corners over frame. Do not use excessive
force. Doing so may damage your tent and void warranty.
* If you are not using the height extension, skip to step 7

Zipper Detail
7. Bring Tent Body To Velcro Assist Strips & Zip Tent

8.
9.
Add Roof Support Beams. Position E poles, then F pole.
E poles are load bearing.
WWW.GORILLAGROWTENT.COM 1-855-GGT-GROW
4 4 4 7 6 98
TALLEST. THICKEST. STRONGEST.
Place spill pool on floor of tent and secure Velcro straps around poles.