GOsingGO GS-SB002 User manual

Please read this user’s guide before using your new
soundbar.
Soundbar
GS-SB002
User’s Guide

Package Contents
󼰥Soundbar 󼰥 AC Adapter
󼰥 AUX-IN Cable 󼰥 Remote Control
LINE-IN Cable 󼰥 User's Guide
Bracket
Features
Provides powerful sound to enhance your listening
experience
Easy to connect to your devices
Remote for convenient controlling from a distance
Note: The power source must supply 16V DC .
Its center tip must be set to positiveand its plug must
fit the DC IN jack. Using an adapter that does not meet
these specifi cations could damage the soundbar or
adapter.
Important Safety Instructions
1. Read these instructions. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this soundbar near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
7. Do not install near any heat sources such as
radiators,heat registers,stoves,or other apparatus
(including amplifiers) that produce heat.
8. Use only attachments/accessories specified by the
manufacturer.
2

Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles,and the point where they exit the
soundbar.
Unplug this soundbar during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the soundbar has been
damaged in any way, such as if the power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the soundbar, it has been
exposed to rain or moisture, it does not operate
normally, or it has been dropped.
To reduce the risk of electric shock, do not remove
cover(or back). There are no user - serviceable
parts inside.
Do not expose the soundbar to dripping or
splashing liquids. Do not place objects filled with
liquids (such as vases) on the soundbar.
The mains plug is used as the disconnect device.
It shall remain readily operable and should not be
obstructed during intended use. To completely
disconnect the soundbar from supply mains, the
main plug of the product shall be disconnected
from the mains socket outlet completely.
Using the soundbar near fluorescent lighting may
cause interference with the remote. If the soundbar
is behaving erratically, move away from any
fluorescent lighting.
Warnings and Precautions
9.
10.
11.
3

AUX IN
Use the supplied RCA cable
to connet to the audio output
jacks on your device(TV,DVD,
game system,ect.).
Power On/Off
FM Radio
Cable
Connections
DC IN
Connect the AC adapter
to the DC IN jack,then
plug it into a outlet.
Bass
output
4

Play/Pause
Display
Short Press for PRV,
Long Press for V-
Source Switching
(Bluetooth,Usb,Optical
Fiber,FM Radio,AUX In)
LINE IN
(For TV Sets,DVD,
Computer,Mobile
Phone and so on)
USB port
Mic SD card port
Signal Receiving
of Remote
Short Press for Next
Long Press for V+
Bluetooth
Pairing
5
Standby Control

Mounting the Soundbar (Optional)
For mounting the soundbar, you may need a twist drill,
a marker pen or pencil, a bubble level, two screws, and
two drywall anchors (optional).
1. Locate a place for mounting the soundbar. Make sure
you have enough room for both ends of the
soundbar to present unobstructed sound
transmission.
2. Use the supplied mounting template to mark two
screw hole positions. Use two screws (not supplied)
with heads no bigger than the soundbar’s
mounting holes.
3. Align the soundbar’s mounting holes with the screw
heads and slide down to secure the soundbar.
Using the Soundbar
After you connect the AC adapter, the soundbar enters
standby mode.
1. Turn on your device and turn down its volume.
2. Press to turn on the soundbar, and turn down its
volume.
3. Press LINE or AUX or BT on the remote to switch to
LINE or AUX mode or BT mode.
4. After starting playback on your device, adjust the
device and soundbar volume to a comfortable level.
Note:
󼯀 The soundbar enters standby mode if you pause it
for more than 15 minutes.
6

Instructions of Remote
7
MUTE :Mute Control KEY
BT: Bluetooth Control Key
POWER:Standby
MP3:MP3 Audio Inputs
OPTIC:Audio Inputs via Optical Fiber
MOVIE:Sound Mode
Control for movie
BASS+
VOICE:Sound Mode
Control for Music
AUX:AUX In control
FM:FM Radio Control
CH+:FM Channel Key
of upward searching
CH-:FM Channel Key
of downward searching
VOLUME+
TREBLE- VOLUME-
BASS-
TREBLE+
3D
LINE :LINE IN
ADJ:Sound control
Play/Pause for Mp3 playing
Auto memory for FM Radio

Specifications
Power Input DC 16V
Output (RMS) 18w x 2+30w
Frequency Response 60-20k(Hz)
Speaker Units 3"BassX2+2.5"Mid-TweeterX2
+Passive Bass RadiatorX1
Audio Input aux in/line in/usb & mic sd
/bluetooth 2.1
Other Functions FM Radio /3D
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
8
Problem Solution
No sound
Make sure the AC adapter is plugged into a
working outlet and firmly connected to the
soundbar.
Check the connection of your device to the
soundbar.
Distorted sound
Check your source device to see if it is
causing the distortion. Set the device and
soundbar volume to a low level.
Unbalanced
sound
If the volume remains low even when the
soundbar’s volume is turned all the way up,
check the source device to make sure it is
connected via a variable output. Make sure
the output is not turned down too low.
Troubleshooting

Limited Warranty
Gosinggo warrants this product against defects in
materials and workmanship under normal use by the
original purchaser for one(1) year after the date of
purchase. GOSINGGO MAKES NO OTHER EXPRESS
WARRANTIES.This warranty does not cover: (a) damage
or failure caused by or attributable to misuse, failure to
follow instructions, improper installation or maintenance,
alteration, accident, Acts of God (such as floods or
lightning), or excess voltage or current; (b) improper
or incorrectly performed repairs by persons who are not
a Gosinggo Authorized Service Facility; © consumables
such as fuses or batteries;(d) ordinary wear and tear
or cosmetic damage; (e) transportation, shipping or
insurance costs;(f) costs of product removal,
installation, set-up service, adjustment or reinstallation;
and (g) claims by persons other than the original
purchaser.
Should a problem occur that is covered by this warranty,
take the product and the sales receipt as proof of
purchase date to the place of purchase. Gosinggo
will, at its option, unless otherwise provided by law:
(a) repair the product without charge for parts and
labor; (b) replace the product with the same or a
comparable product; or (c) refund the purchase price.
All replaced parts and products, and products on
which a refund is made, become the property of
Gosinggo.
New or reconditioned parts and products
may be used in the performance of warranty service.
You will be charged for repair or replacement of the
product made after the expiration of the warranty period.
9

GOSINGGO EXPRESSLY DISCLAIMS ALL WARRANTIES
AND CONDITIONS NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY
BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE,
SHALL EXPIRE ON THE EXPIRATION OF THE STATED
WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, GOSINGGO SHALL HAVE
NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER
OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY
WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT
NOT LIMITED TO, ANY DAMAGES RESULTING FROM
INCONVENIENCE AND ANY LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
EVEN IF GOSINGGO HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from
state to state. You may contact Gosinggo:
Gosinggo,
1 of 3/F(NO.50 Chengnan 4th Road,Soutn District),No.3
Factory,Yuanshangzai Industrial Zone, the side of NO.105
Nationl Road,Hengmei Village,South District,Zhongshan City
For product support, call
0086-760-88858903
10

Federal Communications Commission (FCC) Interference
Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generate, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This equipment must not be collocated or operating in conjunction with
any other antenna or transmitter.