GoSmartwatch Pro S9 User manual

Pro S9 User Manual
Welcome to use our high-performance smartwatch
which creates thoughtful and health experience for
you

■ Device maintenance
Please remember the following tips when you
maintain your smartwatch:
• Clean the smartwatch regularly, especially its
inner side, and keep it dry.
• Adjust the smartwatch tightness to ensure air
circulation.
• Excessive skincare product should not be used
for the wrist wearing the smartwatch
• Please cease wearing the smart watch case of
skin allergy or any discomfort
■ Schematic diagram of mainbody
of the smartwatch

• Power-on
• Long press the side button for 3 seconds or
plug in the charging clamp to charge the
smartwatch
• Downloading and binding of
smartwatch APP
Download and install APP
• Scan QR code with mobile phone to download
APP
• For 10S system, select APP, store search Da Fit
Android system, select Google Play to download and
install Da Fit
Or scan QR code to download
Note: your mobile phone must support Android 5.1
or IOS 8.0 or above, and Bluetooth 4.0 or above.

■ Bind smartwatch with APP
1 2 3
1. Click on "Add Device" to bind the smartwatch
2. Click on your device in the device list scanned
3. Successfully bound
■ Introduction of smartwatch
functions
Power-on status
Switch the menu interfaces of main screen, as the
interfaces shown in the following

■ Remove Device
• For the Android mobile phone, the device can
be disconnected from your mobile phone by
simply clicking on remove device
• For Apple Mobile phone after binding
removal
, you need to click on the symbol on the
right in Setting- Bluetooth and choose to ignore
the device. As shown below

■ Frequently Asked Questions (FAQs)
• Why does the smartwatch disconnect
Bluetooth automatically when the Android
screen goes out?
1 > Lock background APP. When the Da Fit
process is cleared, the smart watch will be
disconnected from the mobile phone
2 > Set APP self-startup
3 > Unrestricted background operation.
The Android mobile phone installed with APP
intelligently restricts the background opera tion
by
default, and App should be set manually
without any restriction.
• Why the smartwatch cannot receive message
push?
1 > Please confirm that you have turned on the
switch for message push at the Da Fit APP
2 > Please confirm that messages can be
displayed normally
in the mobile phone
notification bar. The message push on the
smartwatch is completed by reading the
message from the mobile phone notification
bar. The smartwatch will not receive the
message push
if there is no message in the
mobile
phone notification bar. (You need to

find notification settings in the mobile phone
settings, and turn on the notification switch of
Facebook, Twitter, call, SMS and mobile phone
client)
3 > Turn on the mobile phone --- Settings.
Enter "Notification use right" on the top
search box, re-open Da Fit
• Why can't take a hot bath with the
smartwatch?
Thebath water has a relatively high
temperature, and generates a lot of vapor which
is in the gas phase with small molecular radius
and can easily infiltrate into the smartwatch from
the shell gap. When the temperature drops
down, the vapor will condensate into liquid-
phase droplets which will easily cause the short
circuit inside the smartwatch and damage the
circuit board and then damage the smartwatch .

Do you want the manual in another language?
Scan the QR code below and choose the desired
language.
Do you still have questions? Then go to the help
center by scanning the QR code below.

Note: For more FAQs, please refer to
Da Fit APP feedback.
Warning, the smart watch should not be used for any
medical purpose though it with dynamically monitor
the heart rate at real time