User Servicing Instruction
1.
2.
3.
4.
5.
6.
Fuse replacement
*Only applicable to US power cord and plug.
The fan blade cannot be detached. Do not forcibly pry open the part used to fix the blade,
otherwise it cannot be restored.
The motor is permanently lubricated and requires no oiling.
Any other servicing not mentioned in this manual should be performed by a professional
repair center.
Grasp the plug and remove from the socket or other outlet device. Do not unplug by pulling
the cord.
Slide to open the fuse cover on top of the plug towards blades.
Remove the fuse carefully by using a small screwdriver to pry it out of the compartment by its
metal ends.
Replace only with 2.5 A, 125 V fuse to avoid the risk of fire.
Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be
removed. Discard product if the attachment plug is damaged.
Note: The product requires a 2.5 A, 125 V fuse.
Step 1 Step 2
Step 3 Step 4
