GoVideo DP7040 User manual

Quick Reference
Basic Setup & Operations
DPT100 TV TUNER
About the DPT100
The DPT100 converts your DP7040 or DP8440 DVD
player into a portable television. The tuner connects
to the side of the DVD player and is powered by the
player, so no additional power source is required. Use
the supplied antenna to receive local TV broadcasts
while you’re on the go. Or for improved reception, use
the RF adapter to connect to your home’s cable TV
source or a rooftop antenna.
Connecting the Tuner
Connect the TV tuner to the DVD player as follows:
1
Align the tuner with the edge of the DVD player
and insert the tuner’s connector into the DVD
player’s TV Tuner Input jack.
• The tuner support pin must be inserted at
the same time as the jack to make a secure
connection.
Using the Antenna
Connect the antenna to the TV tuner as follows:
1
Connect the TV tuner to the player as described
above.
2
Connect the antenna to
the EXT. ANT port on the
tuner. Align the square
base of the antenna
jack with the sides of the
input.
3
You are now ready to
search for channels.
1
2
3
Video Output connector:
Connects to the DVD Player
Antenna
Input Jack
Connects to
the Antenna or
RF Adapter
Tuner Support Pin
:
Connects to the DVD Player
1
1
Antenna
2
2
Tuner
3
RF Adapter
Using the RF Adapter
Connect the RF adapter to the TV tuner as follows:
1
Connect the TV tuner to the player as described
above.
2
Connect the RF adapter to the EXT. ANT port on
the tuner.
3
Connect the RF cable from your cable TV wall
outlet, cable box, antenna, or other RF source to
the RF adapter.
4
You are now ready to search for channels.

©2004. GoVideo. All rights reserved.
Fine Tuning Channels
You can fi ne tune individual channels to improve
reception.
1
Press
Mode
until “Tuner” appears in the upper left
corner of the screen.
2
While in Tuner mode, press
Setup/Auto Search
to display the Tuner Setup menu.
3
Press the

/

buttons to select the channel you
want to fi ne tune.
4
Use the

/

buttons to select “Freq”.
5
Use the

/

buttons to fi ne tune the channel for
optimal reception.
Adding or Removing Channels
After Auto Search has stored all available channels,
you can manually add or remove channels from the
list.
1
Press
Mode
until “Tuner” appears in the upper left
corner of the screen.
2
While in Tuner mode, press
Setup/Auto Search
to display the Tuner Setup menu.
3
Use the

/

buttons to select the channel you
want to add or remove from the list.
4
Use the

/

buttons to select “Favorite”.
5
Press

to toggle the “Favorite” setting between
“Yes” (added) and “No” (removed).
Searching for Channels
Use the Auto Search feature to scan for available
channels in your area.
1
Connect the TV tuner to the DVD player.
2
Connect the antenna or RF adapter to the TV
tuner.
• If you are using the RF adapter, be sure to
connect it to an external antenna or cable TV
source.
3
Turn the DVD player on.
4
Press
Mode
until “Tuner” appears in the upper left
corner of the screen.
5
While in Tuner mode, press
Menu/
TV Source
to
set the TV source to “Antenna” or “Cable”.
6
While in Tuner mode, press
Setup/Auto Search
to display the Tuner Setup menu.
7
Use the

/

buttons to select
Auto Search
8
Press

to begin Auto Search.
• The tuner will detect and store all available TV
channels in your area. This may take several
minutes.
• When fi nished, the DVD player will display the
lowest channel found.
9
Press
Setup/Auto Search
to exit the Tuner Setup
menu.
Selecting Channels
To select stored channels:
•
Use the

/

buttons to select the previous or
next stored channel.
• You can also use the 0-9 keys on the remote
control and press
/
Select
to select channels
directly.
Using the DPT100 Tuner
Using the DPT100 Tuner
Channel
Freq
Favorite
Auto search
2
55.3MHz
No
Channel
Freq
Favorite
Auto search
2
55.3MHz
No
Channel
Freq
Favorite
Auto search
2
55.3MHz
No
Channel
Freq
Favorite
Auto search
2
55.3MHz
No