GOVO GOKIXX 410 User manual

MULTIPOINT CONNECTION
Then turn on the earphone to enter pairing mode.
PAIRING
Press and hold multi-function button for 6 secs,
until red and blue light flashes alternately with
a voice prompt “pairing”, will appear.
Search and Tap the earphone name
“GOKIXX 410” on phone.
Once the pairing is complete, the earphones
are connected to your device, and LED indicator
will start flashing blue.
Note: During the pairing mode, if earphones do not
get connected within 5 mins, then it will be switched
OFF automatically.
Follow multipoint connection above mentioned procedure for 1st device
connection.
Then turn OFF the Bluetooth of the 1st device.
Turn OFF the earphone.
Press and hold MFB button for 6 secs (Red-blue-light flashes) to start
pairing mode.
Turn ON Bluetooth of 2nd device and select GOKIXX 410.
Then Turn ON Bluetooth of the 1st device and select GOKIXX 410.
GOKIXX 410

TECHNICAL SPECIFICATION
FUNCTIONS
Power OFF: Press the MFB for 3 Seconds until red light flashes
Play/ Pause: Press MFB to Play/ Pause the music.
Previous/New Track: Long press the “volume +”/volume – “button.
Answer/End Call: Press the MFB.
Volume Up/Down: Short Press the ““volume +”/volume –” button.
Reject Call: Hold MFB for 1 second to reject an incoming call.
Charging: Use the Micro USB cable and connect the headphone to your
computer or any other device made for USB charging. A Red LED
indicator will turn on headphone is on charging. The LED light will turn
into blue when headphones are fully charged.
Siri function/Google Assistant: Press the MFB for 1 Second.
[Mobile mic will be used for Google assistant].
Bluetooth Support: HSP, HFP, AZDP and AVRCP.
Charging Time: 1.5 hour.
Talk time: 8 hour.
Driver Size:
10mm dynamic speaker
Frequency range:
20 Hz- 20000Hz
Connectivity Mode:
HSP, HFP, A2DP and AVRCP
IPX5 Water- resistantSensitivity 98db+ or- 3db
16 15%
IM
Standby time: >25hours (connected with device).
Effective Distance Transmission Range: 10mtr.
Tap the Bluetooth icon to open
Bluetooth on phone.
CONTROLLER FUNCTIONS
TURN ON BLUETOOTH
Press and hold MFB or few seconds
with voice prompt “power ON” will
appear.
POWER ON EARPHONE
Metal Housing
for Rich Bass
Micro USB
Charging
Port (Under
the cover)
Power On/Off/MFB/
Answer call/
Hang up/Reject Call/
Play/Pause
Increase Volume/
Next Track
LED Indicator
Decrease volume or
Previous track

For earlier paired device, just turn ON the earphone, Bluetooth will
automatically get connected.