GPS iRIB-18 Instruction manual

www.globalplasmasolutions.com
Installation, Operation & Maintenance Manual
® ®
NOTICE: This product is to be used only as directed. Read entire manual before use. Do not use unless properly installed.

www.globalplasmasolutions.com
For technical product queries, please reach out to [email protected]
Thank you for purchasing a GPS-iRIB®air ionization system from Global Plasma Solutions. The GPS-iRIB is a highly versa-
tile device designed to be installed on the coiling coil of ductless systems or PTACs. The units can be installed on systems
adhesive-backed hook and loop tape for ease of installation.
Ductless Mini-Split and PTAC Mounting and Wiring Instruction
1.
2.
3.
4.
5.
come with a plastic strip along the top of the coil. If so, mount the GPS-iRIB to the plastic strip. Otherwise
.
CAUTION: Keep the emitter tips away from loose wires or any grounded parts.
CAUTION:
6.
-
7.
supplied.
8.
Figure 1
Mount GPS-iRIB to the
top coil or plastic strip if
available
Secure power
supply within unit.
!

www.globalplasmasolutions.com
Operation
1.
2.
energized 24/7 and does not have to cycle with the fan.
3.
BAS Alarm Operation
1.
Maintenance
1.
-
opposite side. This will discharge any remaining voltage that could cause a potential shock hazard during
maintenance.
2.
Note:
In order to prevent damage to the emitter tape, the should note be folded over onto itself.

www.globalplasmasolutions.com
GPS-041-13-R5-iRIB IOM
3101 Yorkmont Road • Suite 400
980-279-5622
© 2021 Global Plasma Solutions Inc.
To access a list of applicable patents, please visit www.gpspatents.com
• ZERO OZONE EMISSIONS –
MEASURED OZONE
EMISSIONS FROM GPS-IRIB-
18/36 DURING USE PHASE
DOES NOT EXCEED 0.005 PPM
AS TESTED BY UL 867.
UL.COM/ECV