GPX C389B User manual

USER’S GUIDE
V:1008-0414-09
C389B
Dual Alarm Clock Radio with Intelli Set™
For the most up-to-date version of this
User’s Guide, go to www.gpx.com
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• WARNING:Topreventreorshockhazards,donotexposethis
unittorainormoisture.
• CAUTION:Useofcontrolsoradjustmentsorperformanceof
proceduresotherthanthosespeciedmayresultinhazardous
radiationexposure.
• WARNING:Changesormodicationstothisunitnotexpressly
approvedbythepartyresponsibleforcompliancecouldvoidthe
user’sauthoritytooperatetheequipment.
• WARNING:Donotplacetheunitontopofanysoft,porous,or
sensitivesurfacestoavoiddamagingthesurface.Useaprotec-
tivebarrierbetweentheunitandsurfacetoprotectthesurface.
• CAUTION:Dangerofexplosionifbatteryisincorrectlyre-
placed.Replaceonlywiththesameorequivalenttype.
• PRÉCAUTION: Danger d’explosion si les piles sont remplacées
de façon incorrect. Remplacer les piles seulement par le même
type de pile ou l’équivalent.
WARNINGSANDPRECATIONS
OPERATIONS
POWERINGTHEUNIT
GENERALPRODUCTINFORMATION
Donotmixoldandnewbatteries.
Donotmixalkaline,standard(carbon-zinc),or
rechargeable(ni-cad,ni-mh,etc)batteries.
No mezcle baterías viejas y nuevas.
No mezcle baterías alcalinas, estándar (carbono-
zinc) o recargables (ni-cad, ni-mh, etc.).
█ AC/DCADAPTER
Connect the included AC/DC Adpater to
the DC Power Input on the unit and an
ACpowersourcetopowertheunit.
█ BATTERYBACKUP
RequiresaCR2032battery,pre-
installed.
Useasmall,Phillips-headscrewdriver
toopenthebackupbattery
compartment.
Only replacewithsameorequivalent
typebattery.
CR2032
█ INTHEBOX
C389B
AC/DC adapter
Pre-installedBackupBattery(CR2032)
Documentation
█ SETTINGTHETIMEUSINGINTELLISET™
Whentheunitisrstpoweredon,thetimewillautomaticallybesettoEastern
Standard Time.
1. Plugtheunitintoapowersource.
2. PressandholdtheClockButton.
3. While holding the ClockButton,presstheTimeZoneButtonrepeatedlytocycle
throughtheavailabletimezones.
Refer to the Time Zone Chart below to nd your specic time zone.
4. ReleasetheClockButtontonishsettingthetime.
If you are experiencing issues when attempting to use the Intelli Set™ feature, you can
set the clock manually by following the directions on the next page.
Abbr. FullName TimeZone
1AST Atlantic Standard Time UTC-4hours
2EST EsternStandardTime UTC-5hours
3CST Central Standard Time UTC-6hours
4MST Mountain Standard Time UTC-7hours
5PST PacicStandardTime UTC-8hours
6AKST AlaskaStandardTime UTC-9hours
7HAST Hawaii-Aleutian Standard Time UTC-10hours
█ SETTINGTHETIMEMANUALLY
1. Plugtheunitintoapowersource.
2. PressandholdtheClockButton.
3. While holding the ClockButton,press
the Tun+/HrButton and Tun-/Min
Buttontoadjustthehourandminute.
4. ReleasetheClockButtontosetthe
adjustedtime.
█ SETTINGTHEALARMS
1. Withtheunitpoweredoff,pressand
hold the AL1/P-Button(Alarm1)or
AL2/P+Button(Alarm2).
2. While holding the AL1/P-Buttonor
AL2/P+Button,presstheTun+/Hr
Button and Tun-/MinButtontoadjust
the hour and minute.
3. While holding the AL1/P-Buttonor
AL2/P+Button,presstheAM/FM/
AUXButtontosetthealarmtowaketo
thebuzzerortheAM/FMradio.
If set to AM/FM radio, the alarm will
sound to the current radio settings.
4. ReleasetheAL1/P-Buttonor AL2/P+
Buttontosettheadjustedalarmtime.
FCCWarnings
NOTE:Thisequipmenthasbeentestedandfoundto
comply withthe limitsforaClassBdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimits
aredesignedtoprovidereasonableprotectionagainst
harmfulinterferenceinaresidentialinstallation.This
equipmentgenerates,uses,andcanradiateradio
frequencyenergyand,ifnotinstalledandusedin
accordancewiththeinstructions,maycauseharmful
interferencetoradiocommunications.However,there
isnoguaranteethatinterferencewillnotoccurina
particularinstallation.Ifthisequipmentdoescause
harmfulinterferencetoradioortelevisionreception,
whichcanbedeterminedbyturningtheequipmentoff
andon,theuserisencouragedtotrytocorrectthein-
terferencebyoneormoreofthefollowingmeasures:
• Reorient or relocate the receiving antenna.
• Increasetheseparationbetweentheequipmentand
receiver.
• Connecttheequipmentintoanoutletonacircuitdif-
ferentfromthattowhichthereceiverisconnected.
• Consultthedealeroranexperiencedradio/TVtechni-
cianforhelp.

COMPANYINFORMATIONOPERATIONS
CONTROLGLOSSARY
©2009DigitalProductsInternational(DPI,Inc.)|All
othertrademarksappearinghereinarethepropertyof
theirrespectiveowners.Specicationsaresubjectto
change without notice
█ INTERNATIONALSUPPORT
TodownloadthisUser’sGuidein
English,Spanish,orFrench,visitthe
supportsectionatwww.gpx.com.
Paratransferirestaguíadeusuario
eninglés,español,ofrancés,visitela
seccióndelaayudaenwww.gpx.com.
Pourtéléchargerceguidedel’utilisateur
enanglais,espagnol,oufrançais,visitez
lasectiondesoutienchezwww.gpx.
com.
█ SERVICEINFORMATION
Address:2116CarrStreet,St.Louis
MO,63106
Phone:1-314-621-2881
Fax:1-314-588-1805
Email:[email protected]
PartsEmail:[email protected]
Website:www.gpx.com
█ TUNINGTHEAM/FMRADIO
1. PressthePower/ALOffButton to turn
the unit on.
2. PresstheAM/FM/AUXButton to
switchbetweenAMandFMradio
modes.
3. PresstheTun+/HrButton and Tun-/
MinButtonto tune the AM or FM
radio.
PressandholdTun+/HrButton and
Tun-/MinButtontoscanforthenext
availableAMorFMradiostation.
█ SAVINGARADIOSTATIONTO
THEUNIT’SMEMORY
1. TunetheAMorFMradiotothedesired
station.
2. PresstheMemoryButton.
3. PresstheAL1/P-Buttonor AL2/P+
Buttontoselectanumberedpresetto
savethecurrentradiostationto.
4. PresstheMemoryButtontosavethe
currentradiostationtotheselected
numberedpreset.
Up to 10 AM and 10 FM radio stations
can be saved as presets.
5. Withtheunitpoweredon,pressthe
AL1/P-Buttonor AL2/P+Buttonto
cyclethroughthesavedAMorFMradio
stations.
█ TOPOFUNIT
• Power/ALOffButton
PressthePowerButtontoturntheunit
offandon.
PresstheALOffButtontoturnthe
alarmoff,afterithassounded,untilthe
settimeisreachedagain.
• AL1/P-& AL2/P+
PresstheAL1andAL2Buttonstoset
thealarms.
PresstheP-andP+Buttonstocycle
throughsavedpresetradiostations.
• FM/AM/AUXButton
PresstheFM/AM/AUXButtontocycle
throughtheFM,AM,andAuxiliary
modes.
• Clock Button
PresstheClockButtontosettheunit’s
time.
• Snooze Button
PresstheSnoozeButtontodelaythe
alarmforanadditional9minutes.
• AL1& AL2Buttons
PressandholdtheAL1orAL2Buttons
toactivatealarm1oralarm2.
• PresetButton
PressthePresetButtontosavethe
currentradiostationasapreset.
Up to 10 AM and 10 FM radio stations
can be saved as presets.
• TimeZoneButton
PresstheTimeZoneButtontocycle
throughtheunit’savailableTime
Zones.
• DimmerButton
PresstheDimmerButtontoadjustthe
brightnessofthedisplay.
• Tun+/Hr& Tun-/MinButtons
PresstheTuneButtonstoadjustthe
AMorFMradiostation.
PresstheHourandMinuteButtonsto
setthehourandminuteontheclockor
alarm time.
█ BACKOFUNIT
• DSTButton
AdjusttheDSTButtontoonwhen
yourcurrenttimezoneisinDaylight
SavingsTime.AdjusttheDSTButton
tooffatallothertimesoftheyear.
• AuxiliaryInput
UsetheAuxiliaryInputtoconnectan
MP3playerorotheraudiosourcetothe
unit.
Press the FM/AM/AUX Button to switch
the unit to Auxiliary Mode.
• FMWireAntenna
AdjusttheFMWireAntennato
improve FM radio reception.
AnAMantennaisbuiltintotheunit.
Adjustthepositionoftheunitto
improve AM radio reception.
• ResetButton
PresstheResetButtonusinga
papercliporlikeobjecttoresettheunit
toitsdefaultsettings.
If you are experiencing problems with
the unit, pressing the Reset Button is
likely the quickest way to solve the
issue.