Grab-EEZ GE-DISP-99 User manual

Adjust dispenser box to the desired
angle, insert and tighten the Pivot Pin (4)
3. 4.
Cleanroom Wipe Dispenser
Assembly Instructions
High-Tech Conversions 1699 King Street Enfield, Ct, 06082 • www.high-techconversions.com • [phone]
Parts list:
1. Dispenser Box
2. Base Stand
3. Screws
4. Pivot Pin
5. Front Cover
6. Wipe Stack
(sold separately)
7. Weight
Locate the Base Stand (2) and the
two supplied Screws (3.1 & 3.2)
1.
Line up the top holes in the Base Stand
(2) and the Dispenser Box (1) and screw
in the two supplied Screws (3.1 & 3.2)
1.
3.
6.
7.
2.
Assembly for table top use
Assembly for wall mounting
1.
Locate wall
mount holes on
the back of the
unit and mount
on wall as
desired.
2.
1.
4.
2.
3.
1. Slide the front
cover up.
2. Insert the wipe stack.
3. Place the weight on
top of the wipe stack.
4. Carefully slide the
front cover down.
1. Slide the front cover up.
2. Insert the wipe stack.
3. Place the weight on
top of the wipe stack.
4. Carefully slide the
front
cover down.
*Carefully place the weight and slide down the front cover to avoid damage to base
*Carefully place the weight and slide down the front cover to avoid damage to base
4.
1.
2.
3.
2.
4.
5.

Cleanroom Wipe Dispenser
Dimensions
High-Tech Conversions 1699 King Street Enfield, Ct, 06082 • www.high-techconversions.com • [phone]
17.5in
410mm
(Total Height)
14.5in
367mm
(Height)
9.8in
250mm
(Viewing Window)
10.5in
265mm
(Stand Height)
9.75in
245mm
(Width)
5.75in
143mm
(Depth)