Graco CONTEMPO User manual

Graco PD202864A 4/12

Failure to follow these warnings and the
assembly instructions could result in serious injury or death.
sPLEASE SAVE OWNER’S
MANUAL FOR FUTURE USE.
sADULT ASSEMBLY REQUIRED.
sNEVER LEAVE CHILD
UNATTENDED. Always keep
your child in view.
sPREVENT SERIOUS INJURY
OR DEATH FROM FALLS OR
SLIDING OUT. Always use
seat belt. Secure your child at all
times with the restraint system
provided, in either the reclining
or upright position. The tray is
not designed to hold your
child in the highchair. It is
recommended that the highchair
be used in the upright position
only by children capable of
sitting upright unassisted.
sDO NOT FORCE TRAY
against child. Use only the four
adjustment positions. Be sure
both adjustment fingers are
engaged in armrest slots.
sSTRANGULATION HAZARD:
Do not place highchair in any
location where there are cords,
such as window blind cords,
drapes, phone cords, etc.
sTHIS HIGHCHAIR IS
DESIGNED TO BE USED BY
A CHILD UP TO 3 YEARS
OF AGE. Maximum weight
40 pounds (18.1 kg).
sFOLLOW ASSEMBLY
INSTRUCTIONS CAREFULLY.
If you experience any
difficulties, please contact the
Customer Service Department.
sDISCONTINUE USING YOUR
HIGHCHAIR should it become
damaged or broken.

This model may not include some features shown below. Check
that you have all the parts for this model BEFORE assembling your
product. If any parts are miss-ing, call Customer Service.
0ARTSLIST 
No tools required.
!,,-/$%,3
!##%33/2)%3/.#%24!).-/$%,3
Tray Insert
(2 on certain models)

4O/PEN(IGHCHAIR
1
Continue to pull back legs toward
you until you hear a click.
DO NOT apply weight to frame.
2
3
Press red buttons on sides of frame
and pull back legs slightly, then
release red buttons.
SNAP!

4
Pull up seat.

SNAP!
Pull side bars on seat forward
as shown, and buttons on side
of tray will snap into place.
Pull up tray.
5
6

2ECLINE3EAT
7
!DJUSTING(EIGHT
89
3 recline positions
6 positions

10
To lock casters. To unlock casters.
Casters
11

4O3ECURE#HILD
0OINT(ARNESS
WARNING
&ALLING(AZARD
Always use the
seat belt.
12 15
16
13
14
Use slide adjuster at shoulder and
waist for tighter adjustment.

0OINT"UCKLE
To convert to 3-pt harness.
17
18
21
19
20
Use slide adjuster at waist for
further adjustment.

When changing harness strap slots,
MAKE SURE harness straps are going
through same slots in seat pad and seat
back.
22
The harness straps must go into the
slot that is even with or slightly above
the shoulders. Avoid twisting straps.
23

Attaching Tray
SNAP!
24
Squeeze adjustment button on
front of tray to adjust tray to fit
child.
25
Snap tray into place.

4RAY)NSERT
26
27 To remove, lift tray up
from corner.
Dishwasher safe.

28 Remove tray before folding
highchair.
To Fold for Storage
30
Push red buttons on each side
of snack tray to release, as you
push side bars back.
29



31
32
SNAP!
Place tray on highchair for
storage, as shown.
Optional: for maximum
storage, lower highchair.
33

Unfasten hook and loop tape
on back of seat pad.
35
34
Removing Seat Pad
Unhook elastic straps on seat pad
from the back of footrest.

36
38
Pull bottom of seat pad out
through opening behind snack
tray.
37 Push red buttons on each side
of snack tray to release, as you
push side bars back.



Push crotch strap through
bottom slot.
39
Push waist straps through slots
in seat pad.
41
Pull sides of seat pad fabric out
of the channels located in the
back of the snack tray.
40

Pull seat pad off backrest.
43
Pull harness straps through
slots in seat pad.
42

44
Head support and Harness covers
(On certain models)
Never use this head support on
any other product.
45
Slide harness covers onto shoulder
straps.