
2023-08-18
Operating / Care instructions Changing table 334
1. Operating instructions
Height adjustable baby changing table.
Press and hold the button to start the operation.
Release the button when the changing table is at the desired level.
Pos. 1
Control button
Pos. 2
Comprehensive built-in safety switch
Pos. 3
Model without sink has a foldable nursing table area.
2. Maintenance
The changing table is maintenance-free. Greasing and other actions are made during the manufacturing for the
lifetime of the lift. From safety point of view however some components shall be inspected each year.
Inspections, service and repair work shall be made by competent persons.
Remove any objects from the changing table before maintenance and repair works are made.
3. Functional test
Make sure the that the wall installation is intact.
Run the changing table down and up all the way to respectively end position. Check that it moves freely,
without hindrance and jarring sounds.
Check that no cables are jammed.
Check the function of safety switch:
Run down the changing table while lifting safety plate the underside of the table. Make sure that the
lowering is stopped.
Model with sink:
Run the changing table to the end position and make sure the hoses are long enough above the fixing point.
Granberg United Kingdom - Bellamy House Winton Road - Petersfield, Hampshire GU32 3HA - United Kingdom